As you likely know, Arch Linux is in the process of moving to systemd.
So I was reading through the various systemd docs and quickly became
baffled by this new abbreviation "resp.", which I've never seen before
in my English-mother-tongue life.
Some quick Googling turned up a reference:
<http://www.transblawg.eu/index.php?/archives/870-Resp.-and-other-non-existent-English-wordsNicht-existente-englische-Woerter.html>
I guess it's a literal translation of the German "Beziehungsweise", but
English doesn't work the same way. The word "respectively" is used
exclusively to provide an ordering connection between two lists. E.g.
"the prefixes k, M, and G refer to kilo-, mega-, and giga-,
respectively." It is also never abbreviated to "resp." So the sentence
"Sets the default output resp. error output for all services and
sockets" makes no sense to a natural English speaker.
This patch removes all instances of "resp." in the man pages and
replaces them with sentences which are much more clear and, hopefully,
grammatically valid. In almost all instances, it was simply replacing
"resp." with "or," which the original author (Lennart?) could probably
just do in the future.
The only other instances of "resp." are in the src/ subtree, which I
don't feel privileged to correct.
Signed-off-by: Andrew Eikum <aeikum@codeweavers.com>
directory returned by <command>pkg-config
systemd
--variable=systemdsystemunitdir</command> (for
- system services), resp. <command>pkg-config
+ system services) or <command>pkg-config
systemd
--variable=systemduserunitdir</command>
(for user services). This will make the
<term><option>--until=</option></term>
<listitem><para>Start showing entries
- newer or of the specified date,
- resp. older or of the specified
- date. Date specifications should be of
+ on or newer than the specified date,
+ or on or older than the specified
+ date, respectively. Date specifications should be of
the format "2012-10-30 18:17:16". If
the time part is omitted, 00:00:00 is
assumed. If only the seconds component
<literal>tomorrow</literal> are
understood, which refer to 00:00:00 of
the day before the current day, the
- current day, resp the day after the
- current day. <literal>now</literal>
+ current day, or the day after the
+ current day, respectively. <literal>now</literal>
refers to the current time. Finally,
relative times may be specified,
prefixed with <literal>-</literal> or
<literal>+</literal>, referring to
- times before resp. after the current
- time.</para></listitem>
+ times before or after the current
+ time, respectively.</para></listitem>
</varlistentry>
<varlistentry>
URLs are intended to be exposed in
"About this system" UIs behind links
with captions such as "About this
- Operating System", "Obtain Support"
- resp. "Report a Bug". The values should
+ Operating System", "Obtain Support",
+ and "Report a Bug". The values should
be in <ulink
url="https://tools.ietf.org/html/rfc3986">RFC3986
format</ulink>, and should be
check the liberally licensed reference implementation
sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c"/>
- resp. <ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
+ and <ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
<para>These APIs are implemented in the reference
implementation's <filename>sd-daemon.c</filename> and
check the liberally licensed reference implementation
sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/readahead/sd-readahead.c"/>
- resp. <ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-readahead.h"/></para>
+ and <ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-readahead.h"/></para>
<para>These APIs are implemented in the reference
implementation's drop-in
<para>For details about the algorithm check the
liberally licensed reference implementation sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c"/>
- resp. <ulink
+ and <ulink
url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
<para><function>sd_booted()</function> is implemented
<para>For details about the algorithms check the
liberally licensed reference implementation sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c"/>
- resp. <ulink
+ and <ulink
url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
<para><function>sd_is_fifo()</function> and the
<para>The four calls return the number of entries
advanced/set back on success or a negative errno-style
- error code. When the end (resp. beginning) of the journal
- is reached a number smaller than requested is
+ error code. When the end or beginning of the journal
+ is reached, a number smaller than requested is
returned. More specifically, if
<function>sd_journal_next()</function> or
<function>sd_journal_previous()</function> reach the
<para>For details about the algorithm check the
liberally licensed reference implementation sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c"/>
- resp. <ulink
+ and <ulink
url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
<para><function>sd_listen_fds()</function> is
<para>For details about the algorithms check the
liberally licensed reference implementation sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/libsystemd-daemon/sd-daemon.c"/>
- resp. <ulink
+ and <ulink
url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-daemon.h"/></para>
<para><function>sd_notify()</function> and
<para>For details about the algorithm check the
liberally licensed reference implementation sources:
<ulink url="http://cgit.freedesktop.org/systemd/systemd/plain/src/readahead/sd-readahead.c"/>
- resp. <ulink
+ and <ulink
url="http://cgit.freedesktop.org/systemd/systemd/plain/src/systemd/sd-readahead.h"/></para>
<para><function>sd_readahead()</function> is
<para>Note that these services invoke
<citerefentry><refentrytitle>systemd-tty-ask-password-agent</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- with the <command>--watch --console</command>
- resp. <command>--watch --wall</command> command line
+ with either the <command>--watch --console</command>
+ or <command>--watch --wall</command> command line
parameters.</para>
</refsect1>
<literal>warning</literal>,
<literal>notice</literal>,
<literal>info</literal>,
- <literal>debug</literal>, resp. a
+ <literal>debug</literal>, or a
value between 0 and 7 (corresponding
to the same named levels). These
priority values are the same as
<term>m</term>
<term>i</term>
- <listitem><para>Change ordering of control groups
+ <listitem><para>Sort the control groups
by path, number of tasks, CPU load,
- memory usage resp. IO
- load.</para></listitem>
+ memory usage, or IO
+ load, respectively.</para></listitem>
</varlistentry>
<varlistentry>
<term>+</term>
<term>-</term>
- <listitem><para>Increase,
- resp. decrease refresh
- delay.</para></listitem>
+ <listitem><para>Increase
+ or decrease refresh
+ delay, respectively.</para></listitem>
</varlistentry>
</variablelist>
for inhibiting
reboot/power-off/halt/kexec,
suspending/hibernating, the automatic
- idle detection, resp. the low-level
+ idle detection, or the low-level
handling of the power/sleep key and
- the lid switch. If omitted defaults to
+ the lid switch, respectively. If omitted,
+ defaults to
<literal>idle:sleep:shutdown</literal>.</para></listitem>
</varlistentry>
for more information on the specific unit
configuration files. The execution specific
configuration options are configured in the [Service],
- [Socket], [Mount] resp. [Swap] section, depending on the unit
+ [Socket], [Mount], or [Swap] sections, depending on the unit
type.</para>
</refsect1>
<term><varname>Group=</varname></term>
<listitem><para>Sets the Unix user
- resp. group the processes are executed
- as. Takes a single user resp. group
+ or group that the processes are executed
+ as, respectively. Takes a single user or group
name or ID as argument. If no group is
- set the default group of the user is
+ set, the default group of the user is
chosen.</para></listitem>
</varlistentry>
the value is suffixed with K, M, G or
T the specified memory size is parsed
as Kilobytes, Megabytes, Gigabytes,
- resp. Terabytes (to the base
- 1024). This controls the
+ or Terabytes (to the base
+ 1024), respectively. This controls the
<literal>memory.limit_in_bytes</literal>
and
<literal>memory.soft_limit_in_bytes</literal>
path (such as
<filename>/dev/null</filename>)
followed by a combination of r, w, m
- to control reading, writing resp.
+ to control reading, writing, or
creating of the specific device node
- by the unit. This controls the
+ by the unit, respectively. This controls the
<literal>devices.allow</literal>
and
<literal>devices.deny</literal>
If the bandwidth is suffixed with K, M,
G, or T the specified bandwidth is
parsed as Kilobytes, Megabytes,
- Gigabytes, resp. Terabytes (Example:
+ Gigabytes, or Terabytes, respectively (Example:
"/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
5M"). This controls the
<literal>blkio.read_bps_device</literal>
journal protocol, for the
those read from a services'
standard output or error
- output, and for those read
- from the kernel, resp.
+ output, or for those read
+ from the kernel, respectively.
</para>
</listitem>
</varlistentry>
for more information on the specific unit
configuration files. The execution specific
configuration options are configured in the [Service],
- [Socket], [Mount] resp. [Swap] section, depending on the unit
+ [Socket], [Mount], or [Swap] section, depending on the unit
type.</para>
</refsect1>
<term><varname>ExecStartPre=</varname></term>
<term><varname>ExecStartPost=</varname></term>
<listitem><para>Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the command in
- <varname>ExecStart=</varname>. Multiple
+ <varname>ExecStart=</varname>, respectively. Multiple
command lines may be concatenated in a
single directive, by separating them
by semicolons (these semicolons must
<term><varname>ListenSequentialPacket=</varname></term>
<listitem><para>Specifies an address
to listen on for a stream
- (SOCK_STREAM), datagram (SOCK_DGRAM)
- resp. sequential packet
- (SOCK_SEQPACKET) socket. The address
+ (SOCK_STREAM), datagram (SOCK_DGRAM),
+ or sequential packet
+ (SOCK_SEQPACKET) socket, respectively. The address
can be written in various formats:</para>
<para>If the address starts with a
<term><varname>SendBuffer=</varname></term>
<listitem><para>Takes an integer
argument controlling the receive
- resp. send buffer sizes of this
- socket. This controls the SO_RCVBUF
- resp. SO_SNDBUF socket options (see
+ or send buffer sizes of this
+ socket, respectively. This controls the SO_RCVBUF
+ and SO_SNDBUF socket options (see
<citerefentry><refentrytitle>socket</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details.).</para></listitem>
</varlistentry>
<varname>MessageQueueMessageSize=</varname></term>
<listitem><para>These two settings
take integer values and control the
- mq_maxmsg resp. mq_msgsize field when
+ mq_maxmsg field or the mq_msgsize field, respectively, when
creating the message queue. Note that
either none or both of these variables
need to be set. See
<term><varname>ExecStartPost=</varname></term>
<listitem><para>Takes one or more
command lines, which are executed
- before (resp. after) the listening
+ before or after the listening
sockets/FIFOs are created and
- bound. The first token of the command
+ bound, respectively. The first token of the command
line must be an absolute file name,
then followed by arguments for the
process. Multiple command lines may be
<term><varname>ExecStopPre=</varname></term>
<term><varname>ExecStopPost=</varname></term>
<listitem><para>Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the listening sockets/FIFOs are closed
- and removed. Multiple command lines
+ and removed, respectively. Multiple command lines
may be specified following the same
scheme as used for
<varname>ExecStartPre=</varname> of
terminated.</para>
<para>Swap units must be named after the devices
- (resp. files) they control. Example: the swap device
+ or files they control. Example: the swap device
<filename>/dev/sda5</filename> must be configured in a
unit file <filename>dev-sda5.swap</filename>. For
details about the escaping logic used to convert a
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
<para>All swap units automatically get the appropriate
- dependencies on the devices (resp. on the mount points
- of the files) they are activated from.</para>
+ dependencies on the devices or on the mount points
+ of the files they are activated from.</para>
<para>Swap units with
<varname>DefaultDependencies=</varname> enabled
<para>This man pages lists the common configuration
options of all the unit types. These options need to
- be configured in the [Unit] resp. [Install]
- section of the unit files.</para>
+ be configured in the [Unit] or [Install]
+ sections of the unit files.</para>
<para>In addition to the generic [Unit] and [Install]
sections described here, each unit should have a
<listitem><para>Similar to
<varname>Requires=</varname>
- resp. <varname>RequiresOverridable=</varname>. However,
+ and <varname>RequiresOverridable=</varname>, respectively. However,
if a unit listed here is not started
already it will not be started and the
transaction fails
<varname>Before=</varname>. If two
units have no ordering dependencies
between them they are shut down
- resp. started up simultaneously, and
+ or started up simultaneously, and
no ordering takes
place. </para></listitem>
</varlistentry>
<listitem><para>Takes a boolean
argument. If <option>true</option>
this unit can only be activated
- (resp. deactivated) indirectly. In
+ or deactivated indirectly. In
this case explicit start-up
- (resp. termination) requested by the
+ or termination requested by the
user is denied, however if it is
- started (resp. stopped) as a
+ started or stopped as a
dependency of another unit, start-up
- (resp. termination) will succeed. This
+ or termination will succeed. This
is mostly a safety feature to ensure
that the user does not accidentally
activate units that are not intended
<listitem><para>Installs a symlink in
the <filename>.wants/</filename>
- resp. <filename>.requires/</filename>
- subdirectory for a unit. This has the
+ or <filename>.requires/</filename>
+ subdirectory for a unit, respectively. This has the
effect that when the listed unit name
is activated the unit listing it is
activated
<term><option>--system</option></term>
<term><option>--user</option></term>
- <listitem><para>Tell systemd to run a
- system instance (resp. user
- instance), even if the process ID is
- not 1 (resp. is 1), i.e. systemd is
- not (resp. is) run as init process.
+ <listitem><para>For <option>--system</option>,
+ tell systemd to run a
+ system instance, even if the process ID is
+ not 1, i.e. systemd is not run as init process.
+ <option>--user</option> does the opposite,
+ running a user instance even if the process
+ ID is 1.
Normally it should not be necessary to
pass these options, as systemd
automatically detects the mode it is
<term><option>--default-standard-error=</option></term>
<listitem><para>Sets the default
- output resp. error output for all
- services and sockets, i.e. controls
+ output or error output for all
+ services and sockets, respectively. That is, controls
the default for
<option>StandardOutput=</option>
- resp. <option>StandardError=</option>
+ and <option>StandardError=</option>
(see
<citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for details). Takes one of
Specification</ulink>.</para>
<para>Systems which invoke systemd in a container
- resp. initrd environment should implement the
+ or initrd environment should implement the
<ulink
url="http://www.freedesktop.org/wiki/Software/systemd/ContainerInterface">Container
- Interface</ulink> resp. <ulink
+ Interface</ulink> or <ulink
url="http://www.freedesktop.org/wiki/Software/systemd/InitrdInterface">initrd
- Interface</ulink> specifications.</para>
+ Interface</ulink> specifications, respectively.</para>
</refsect1>
<refsect1>
<listitem><para>Sets the log level to
<literal>debug</literal>
- (resp. <literal>info</literal> on
+ (or <literal>info</literal> on
<literal>SIGRTMIN+23</literal>), as
controlled via
<varname>systemd.log_level=debug</varname>
- (resp. <varname>systemd.log_level=info</varname>
+ (or <varname>systemd.log_level=info</varname>
on <literal>SIGRTMIN+23</literal>) on
the kernel command
line.</para></listitem>
<listitem><para>Sets the log level to
<literal>journal-or-kmsg</literal>
- (resp. <literal>console</literal> on
- <literal>SIGRTMIN+27</literal>;
- resp. <literal>kmsg</literal> on
- <literal>SIGRTMIN+28</literal>;
- resp. <literal>syslog-or-kmsg</literal>
+ (or <literal>console</literal> on
+ <literal>SIGRTMIN+27</literal>,
+ <literal>kmsg</literal> on
+ <literal>SIGRTMIN+28</literal>,
+ or <literal>syslog-or-kmsg</literal>
on <literal>SIGRTMIN+29</literal>), as
controlled via
<varname>systemd.log_target=journal-or-kmsg</varname>
- (resp. <varname>systemd.log_target=console</varname>
- on <literal>SIGRTMIN+27</literal>;
- resp. <varname>systemd.log_target=kmsg</varname>
- on <literal>SIGRTMIN+28</literal>;
- resp
+ (or <varname>systemd.log_target=console</varname>
+ on <literal>SIGRTMIN+27</literal>,
+ <varname>systemd.log_target=kmsg</varname>
+ on <literal>SIGRTMIN+28</literal>,
+ or
<varname>systemd.log_target=syslog-or-kmsg</varname>
on <literal>SIGRTMIN+29</literal>) on
the kernel command
<term><varname>systemd.default_standard_output=</varname></term>
<term><varname>systemd.default_standard_error=</varname></term>
<listitem><para>Controls default
- standard output/error output for
+ standard output and error output for
services, with the same effect as the
<option>--default-standard-output=</option>
- resp. <option>--default-standard-error=</option>
+ and <option>--default-standard-error=</option>
command line arguments described
- above.</para></listitem>
+ above, respectively.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>5</varname></term>
<listitem><para>Boot into the
- specified legacy SysV runlevel. This
- is equivalent to
+ specified legacy SysV runlevel. These
+ are equivalent to
<varname>systemd.unit=runlevel2.target</varname>,
<varname>systemd.unit=runlevel3.target</varname>,
<varname>systemd.unit=runlevel4.target</varname>,
- resp. <varname>systemd.unit=runlevel5.target</varname>
+ and <varname>systemd.unit=runlevel5.target</varname>, respectively,
and provided for compatibility reasons
and to be easier to
type.</para></listitem>