setting('print_temperature4', 0, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("4th nozzle temperature (C)"), _("Temperature used for printing. Set at 0 to pre-heat yourself.\nFor PLA 205C is recommended.\nFor ABS and HIPS 240C is recommended."))
setting('print_bed_temperature', 70, int, 'basic', _('Speed and Temperature')).setRange(0,340).setLabel(_("Bed temperature (C)"), _("Temperature used for the heated printer bed. Set at 0 to pre-heat yourself.\nFor PLA 60C is recommended.\nFor ABS and HIPS 110C is recommended."))
setting('support', 'None', [_('None'), _('Touching buildplate'), _('Everywhere')], 'basic', _('Support')).setExpertSubCategory('Support').setLabel(_("Support type"), _("Type of support structure build.\n\"Support is useful when a model has severe over hangs. Using this option does require some finishing of the print, including removing the support material.\n\"Touching buildplate\" is the most commonly used support setting.\n\nNone does not do any support.\nTouching buildplate only creates support where the support structure will touch the build platform.\nEverywhere creates support even on top of parts of the model."))
-setting('platform_adhesion', 'None', [_('None'), _('Brim'), _('Raft')], 'basic', _('Support')).setExpertSubCategory([None, 'Brim', 'Raft']).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and it is the recommended option.\nRaft adds a thick raster below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
+setting('platform_adhesion', 'None', [_('None'), _('Brim'), _('Raft')], 'basic', _('Support')).setExpertSubCategory(['Skirt', 'Brim', 'Raft']).setLabel(_("Platform adhesion type"), _("Different options that help in preventing corners from lifting due to warping.\nBrim adds a single layer thick flat area around your object which is easy to cut off afterwards, and it is the recommended option.\nRaft adds a thick raster below the object and a thin interface between this and your object.\n(Note that enabling the brim or raft disables the skirt)"))
setting('support_dual_extrusion', 'Both', [_('Both'), _('First extruder'), _('Second extruder')], 'basic', _('Support')).setLabel(_("Support dual extrusion"), _("Which extruder to use for support material, for break-away support you can use both extruders.\nBut if one of the materials is more expensive then the other you could select an extruder to use for support material. This causes more extruder switches.\nYou can also use the 2nd extruder for soluble support materials."))
setting('wipe_tower', False, bool, 'basic', _('Dual extrusion')).setLabel(_("Wipe&prime tower"), _("The wipe-tower is a tower printed on every layer when switching between nozzles.\nThe old nozzle is wiped off on the tower before the new nozzle is used to print the 2nd color."))
setting('wipe_tower_volume', 15, float, 'expert', _('Dual extrusion')).setLabel(_("Wipe&prime tower volume per layer (mm3)"), _("The amount of material put in the wipe/prime tower.\nThis is done in volume because in general you want to extrude a\ncertain amount of volume to get the extruder going, independent on the layer height.\nThis means that with thinner layers, your tower gets bigger."))
setting('raft_airgap_all', 0.0, float, 'expert', _('Raft')).setRange(0).setLabel(_("Airgap"), _("Gap between the last layer of the raft the whole print."))
setting('raft_airgap', 0.22, float, 'expert', _('Raft')).setRange(0).setLabel(_("First Layer Airgap"), _("Gap between the last layer of the raft and the first printing layer. A small gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This value is added on top of the 'Airgap' setting."))
setting('raft_surface_layers', 2, int, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layers"), _("Amount of surface layers put on top of the raft, these are fully filled layers on which the model is printed."))
+setting('raft_surface_thickness', 0.27, float, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layer thickness (mm)"), _("Thickness of each surface layer."))
+setting('raft_surface_linewidth', 0.4, float, 'expert', _('Raft')).setRange(0).setLabel(_("Surface layer line width (mm)"), _("Width of the lines for each surface layer."))
setting('fix_horrible_union_all_type_a', True, bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-A)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
setting('fix_horrible_union_all_type_b', False, bool, 'expert', _('Fix horrible')).setLabel(_("Combine everything (Type-B)"), _("This expert option adds all parts of the model together. The result is usually that internal cavities disappear. Depending on the model this can be intended or not. Enabling this option is at your own risk. Type-A is dependent on the model normals and tries to keep some internal holes intact. Type-B ignores all internal holes and only keeps the outside shape per layer."))
setting('fix_horrible_use_open_bits', False, bool, 'expert', _('Fix horrible')).setLabel(_("Keep open faces"), _("This expert option keeps all the open bits of the model intact. Normally Cura tries to stitch up small holes and remove everything with big holes, but this option keeps bits that are not properly part of anything and just goes with whatever is left. This option is usually not what you want, but it might enable you to slice models otherwise failing to produce proper paths.\nAs with all \"Fix horrible\" options, results may vary and use at your own risk."))
settings['raftAirGapLayer0'] = int(profile.getProfileSettingFloat('raft_airgap') * 1000 + profile.getProfileSettingFloat('raft_airgap_all') * 1000)
settings['raftAirGap'] = int(profile.getProfileSettingFloat('raft_airgap_all') * 1000)
settings['raftBaseSpeed'] = int(profile.getProfileSettingFloat('bottom_layer_speed'))
- settings['raftFanSpeed'] = 100
- settings['raftSurfaceThickness'] = settings['raftInterfaceThickness']
- settings['raftSurfaceLinewidth'] = int(profile.calculateEdgeWidth() * 1000)
- settings['raftSurfaceLineSpacing'] = int(profile.calculateEdgeWidth() * 1000 * 0.9)
+ settings['raftFanSpeed'] = 0
+ settings['raftSurfaceThickness'] = int(profile.getProfileSettingFloat('raft_surface_thickness') * 1000)
+ settings['raftSurfaceLinewidth'] = int(profile.getProfileSettingFloat('raft_surface_linewidth') * 1000)
+ settings['raftSurfaceLineSpacing'] = int(profile.getProfileSettingFloat('raft_surface_linewidth') * 1000)
settings['raftSurfaceLayers'] = int(profile.getProfileSettingFloat('raft_surface_layers'))
settings['raftSurfaceSpeed'] = int(profile.getProfileSettingFloat('bottom_layer_speed'))
else:
~ianmdlvl / cura.git / commitdiff