printMaterialPanel = wx.Panel(self)
self.printMaterialPLA = wx.RadioButton(printMaterialPanel, -1, 'PLA', style=wx.RB_GROUP)
self.printMaterialABS = wx.RadioButton(printMaterialPanel, -1, 'ABS')
+ self.printMaterialHIPS = wx.RadioButton(printMaterialPanel, -1, 'HIPS')
self.printMaterialDiameter = wx.TextCtrl(printMaterialPanel, -1, profile.getProfileSetting('filament_diameter'))
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
printMaterialPanel.Show(False)
boxsizer = wx.StaticBoxSizer(sb, wx.VERTICAL)
boxsizer.Add(self.printMaterialPLA)
boxsizer.Add(self.printMaterialABS)
+ boxsizer.Add(self.printMaterialHIPS)
boxsizer.Add(wx.StaticText(printMaterialPanel, -1, _("Diameter:")))
boxsizer.Add(self.printMaterialDiameter)
printMaterialPanel.SetSizer(wx.BoxSizer(wx.VERTICAL))
self.printMaterialPLA.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
self.printMaterialABS.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
+ self.printMaterialHIPS.Bind(wx.EVT_RADIOBUTTON, lambda e: self._callback())
self.printMaterialDiameter.Bind(wx.EVT_TEXT, lambda e: self._callback())
self.printSupport.Bind(wx.EVT_CHECKBOX, lambda e: self._callback())
if self.printSupport.GetValue():
put('support', _("Exterior Only"))
+# LulzBot Mini slice settings for use with the simple slice selection. This needs to be further modified to only be used when the Mini machine config is loaded.
+ put('print_temperature', '0')
+ put('print_bed_temperature', '0')
+ put('retraction_speed', '25')
+ put('bottom_thickness', '0.425')
+ put('layer0_width_factor', '125')
+ put('fan_speed', '10')
+ put('fan_speed_max', '50')
+ put('cool_head_lift', 'True')
+ put('end.gcode', """;End GCode
+ M104 T0 S0 ;extruder heater off
+ M104 T1 S0 ;extruder heater off
+ M140 S0 ;heated bed heater off (if you have it)
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
+ G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}""")
+
+ if self.printMaterialHIPS.GetValue() or self.printMaterialABS.GetValue():
+ put('solid_layer_thickness', '0.8')
+ put('fill_density', '40')
+ put('retraction_amount', '1.5')
+ put('travel_speed', '175')
+ put('start.gcode', """;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+ G21 ; metric values
+ G90 ; absolute positioning
+ M82 ; set extruder to absolute mode
+ M107 ; start with the fan off
+ G92 E0 ; set extruder position to 0
+ M140 S110 ; get bed heating up
+ G28 ; home all
+ M109 S150 ; set to cleaning temp and wait
+ G1 Z150 E-45 F200 ; suck up XXmm of filament
+ M109 S170 ; heat up rest of way
+ G1 X45 Y178 F11520 ; move behind scraper
+ G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
+ G1 X45 Y178 Z-1 F4000 ; wiping ; plunge into wipe pad
+ G1 X55 Y176 Z-.5 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X80 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X80 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X90 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X115 Y175 Z-1.5 F1000 ; wipe slower and bury noz in cleanish area
+ G1 Z10 ; raise z
+ G28 X0 Y0 ; home x and y
+ M109 S170 ; set to probing temp
+ G29 ; Probe
+ G1 X5 Y15 Z10 F5000 ; get out the way
+ M109 S230 ; set extruder temp and wait
+ G1 Z2 E5 F200 ; extrude filament back into nozzle
+ M140 S110 ; get bed temping up during first layer
+ M206 X0.0 Y0.0 Z0.0 ; offset home position for fine tuning""")
+ elif self.printMaterialPLA.GetValue():
+ put('start.gcode', """;Basic settings: Layer height: {layer_height} Walls: {wall_thickness} Fill: {fill_density}
+ ;Print time: {print_time}
+ ;Filament used: {filament_amount}m {filament_weight}g
+ ;Filament cost: {filament_cost}
+ ;M190 S{print_bed_temperature} ;Uncomment to add your own bed temperature line
+ ;M109 S{print_temperature} ;Uncomment to add your own temperature line
+
+ G21 ; metric values
+ G90 ; absolute positioning
+ M82 ; set extruder to absolute mode
+ M107 ; start with the fan off
+ G92 E0 ; set extruder position to 0
+ M140 S65 ; get bed heating up
+ G28 ; home all
+ M109 S130 ; set to cleaning temp and wait
+ G1 Z150 E-45 F200 ; suck up XXmm of filament
+ M109 S140 ; heat up rest of way
+ G1 X45 Y178 F11520 ; move behind scraper
+ G1 Z0 F1200 ; CRITICAL: set Z to height of top of scraper
+ G1 X45 Y178 Z-1 F4000 ; wiping ; plunge into wipe pad
+ G1 X55 Y176 Z-.5 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X45 Y178 F4000 ; wiping
+ G1 X55 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X80 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X80 Y176 F4000 ; wiping
+ G1 X60 Y178 F4000 ; wiping
+ G1 X90 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X80 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X100 Y176 F4000 ; wiping
+ G1 X110 Y178 F4000 ; wiping
+ G1 X115 Y175 Z-1.5 F1000 ; wipe slower and bury noz in cleanish area
+ G1 Z10 ; raise z
+ G28 X0 Y0 ; home x and y
+ M109 S140 ; set to probing temp
+ G29 ; Probe
+ G1 X5 Y15 Z10 F5000 ; get out the way
+ M109 S190 ; set extruder temp and wait
+ G1 Z2 E5 F200 ; extrude filament back into nozzle
+ M140 S65 ; get bed temping up during first layer
+ M206 X0.0 Y0.0 Z0.0 ; offset home position for fine tuning
+end.gcode = M104 S0
+ M140 S0 ;heated bed heater off (if you have it)
+ M107 ; fans off
+ G91 ;relative positioning
+ G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure
+ G1 Z+0.5 E-5 X-20 Y-20 F3000 ;move Z up a bit and retract filament even more
+ G1 X155 Y175 Z156 F10000 ;move X/Y to min endstops, so the head is out of the way
+ M84 ;steppers off
+ G90 ;absolute positioning
+ ;{profile_string}""")
+
nozzle_size = float(get('nozzle_size'))
- if self.printTypeNormal.GetValue():
- put('layer_height', '0.2')
- put('wall_thickness', nozzle_size * 2.0)
- put('layer_height', '0.10')
- put('fill_density', '20')
- elif self.printTypeLow.GetValue():
- put('wall_thickness', nozzle_size * 2.5)
- put('layer_height', '0.20')
- put('fill_density', '10')
- put('print_speed', '60')
- put('cool_min_layer_time', '3')
+ if self.printMaterialHIPS.GetValue():
+ put('retraction_hop', '0.6')
put('bottom_layer_speed', '30')
- elif self.printTypeHigh.GetValue():
- put('wall_thickness', nozzle_size * 2.0)
- put('layer_height', '0.06')
- put('fill_density', '20')
- put('bottom_layer_speed', '15')
- elif self.printTypeJoris.GetValue():
- put('wall_thickness', nozzle_size * 1.5)
+ put('fan_full_height', '5')
+ put('cool_min_feedrate', '45')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '85')
+ put('infill_speed', '115')
+ put('inset0_speed', '75')
+ put('insetx_speed', '80')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '65')
+ put('infill_speed', '85')
+ put('inset0_speed', '45')
+ put('insetx_speed', '50')
+ if self.printTypeHigh.GetValue():
+ put('layer_height', '0.14')
+ put('print_speed', '40')
+ put('infill_speed', '65')
+ put('inset0_speed', '30')
+ put('insetx_speed', '35')
+ if self.printMaterialABS.GetValue():
+ put('retraction_hop', '0.6')
+ put('cool_min_feedrate', '10')
+ put('fan_enabled', 'False')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '85')
+ put('bottom_layer_speed', '30')
+ put('infill_speed', '110')
+ put('inset0_speed', '70')
+ put('insetx_speed', '80')
+ put('brim_line_count', '8')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '75')
+ put('bottom_layer_speed', '25')
+ put('infill_speed', '80')
+ put('inset0_speed', '60')
+ put('insetx_speed', '70')
+ if self.printTypeHigh.GetValue():
+ put('layer_height', '0.14')
+ put('print_speed', '60')
+ put('bottom_layer_speed', '25')
+ put('infill_speed', '60')
+ put('inset0_speed', '40')
+ put('insetx_speed', '50')
+ put('fan_full_height', '5')
+ put('skirt_line_count', '4')
+ if self.printMaterialPLA.GetValue():
+ put('solid_Layer_thickness', '1')
+ put('fill_density', '70')
+ put('retraction_amount', '3')
+ put('retraction_hop', '0.5')
+ put('travel_speed', '150')
+ put('bottom_travel_speed', '30')
+ put('fan_full_height', '1')
+ put('cool_min_feedrate', '15')
+ put('skirt_line_count', '2')
+ if self.printTypeLow.GetValue():
+ put('layer_height', '0.38')
+ put('print_speed', '90')
+ put('infill_speed', '125')
+ put('inset0_speed', '75')
+ put('insetx_speed', '85')
+ if self.printTypeNormal.GetValue():
+ put('layer_height', '0.25')
+ put('print_speed', '70')
+ put('infill_speed', '95')
+ put('inset0_speed', '65')
+ put('insetx_speed', '75')
+ if self.printTypeHigh.GetValue():
+ pass
+ nozzle_size = float(get('nozzle_size'))
put('filament_diameter', self.printMaterialDiameter.GetValue())
- if self.printMaterialPLA.GetValue():
- pass
- if self.printMaterialABS.GetValue():
- put('print_bed_temperature', '100')
- put('platform_adhesion', 'Brim')
- put('filament_flow', '107')
- put('print_temperature', '245')
put('plugin_config', '')
def updateProfileToControls(self):
~ianmdlvl / cura.git / commitdiff