--- /dev/null
+#define __AVR_ATmega2560__
+#define __cplusplus
+#define __builtin_va_list int
+#define __attribute__(x)
+#define __inline__
+#define __asm__(x)
+#define ARDUINO 23
+extern "C" void __cxa_pure_virtual() {}
+#include "C:\arduino-0023\libraries\LiquidCrystal\LiquidCrystal.h"
+#include "C:\arduino-0023\libraries\LiquidCrystal\LiquidCrystal.cpp"
+void enquecommand(const char *cmd);
+void setup_photpin();
+void setup_powerhold();
+void suicide();
+void setup();
+void loop();
+void get_command();
+float code_value();
+long code_value_long();
+bool code_seen(char code_string[]);
+bool code_seen(char code);
+void process_commands();
+void process_commands();
+void FlushSerialRequestResend();
+void ClearToSend();
+void get_coordinates();
+void get_arc_coordinates();
+void prepare_move();
+void prepare_arc_move(char isclockwise);
+void manage_inactivity(byte debug);
+void kill();
+void lcdProgMemprint(const char *str);
+int intround(const float &x);
+void lcd_status(const char* message);
+void lcd_statuspgm(const char* message);
+FORCE_INLINE void clear();
+void lcd_init();
+void beep();
+void beepshort();
+void lcd_status();
+void buttons_init();
+void buttons_check();
+char *ftostr3(const float &x);
+char *itostr2(const uint8_t &x);
+char *ftostr31(const float &x);
+char *ftostr32(const float &x);
+char *itostr31(const int &xx);
+char *itostr3(const int &xx);
+char *itostr4(const int &xx);
+char *ftostr51(const float &x);
+char *ftostr52(const float &x);
+void wd_init();
+void wd_reset();
+
+#include "C:\arduino-0023\hardware\arduino\cores\arduino\WProgram.h"
+#include "C:\Users\Blair\Desktop\Marlin\Marlin\Marlin.pde"
+#include "C:\Users\Blair\Desktop\Marlin\Marlin\ultralcd.pde"
+#include "C:\Users\Blair\Desktop\Marlin\Marlin\watchdog.pde"
// Check startup - does nothing if bootloader sets MCUSR to 0
byte mcu = MCUSR;
- if(mcu & 1) SERIAL_ECHOLNPGM("PowerUp");
- if(mcu & 2) SERIAL_ECHOLNPGM("External Reset");
- if(mcu & 4) SERIAL_ECHOLNPGM("Brown out Reset");
- if(mcu & 8) SERIAL_ECHOLNPGM("Watchdog Reset");
- if(mcu & 32) SERIAL_ECHOLNPGM("Software Reset");
+ if(mcu & 1) SERIAL_ECHOLNPGM(MSG_POWERUP);
+ if(mcu & 2) SERIAL_ECHOLNPGM(MSG_EXTERNAL_RESET);
+ if(mcu & 4) SERIAL_ECHOLNPGM(MSG_BROWNOUT_RESET);
+ if(mcu & 8) SERIAL_ECHOLNPGM(MSG_WATCHDOG_RESET);
+ if(mcu & 32) SERIAL_ECHOLNPGM(MSG_SOFTWARE_RESET);
MCUSR=0;
- SERIAL_ECHOPGM("Marlin: ");
+ SERIAL_ECHOPGM(MSG_MARLIN);
SERIAL_ECHOLNPGM(VERSION_STRING);
#ifdef STRING_VERSION_CONFIG_H
#ifdef STRING_CONFIG_H_AUTHOR
SERIAL_ECHO_START;
- SERIAL_ECHOPGM("Configuration.h: ");
+ SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
SERIAL_ECHOPGM(STRING_VERSION_CONFIG_H);
- SERIAL_ECHOPGM(" | Author: ");
+ SERIAL_ECHOPGM(MSG_AUTHOR);
SERIAL_ECHOLNPGM(STRING_CONFIG_H_AUTHOR);
#endif
#endif
SERIAL_ECHO_START;
- SERIAL_ECHOPGM("Free Memory:");
+ SERIAL_ECHOPGM(MSG_FREE_MEMORY);
SERIAL_ECHO(freeMemory());
- SERIAL_ECHOPGM(" PlannerBufferBytes:");
+ SERIAL_ECHOPGM(MSG_PLANNER_BUFFER_BYTES);
SERIAL_ECHOLN((int)sizeof(block_t)*BLOCK_BUFFER_SIZE);
for(int8_t i = 0; i < BUFSIZE; i++)
{
if(strstr(cmdbuffer[bufindr],"M29") == NULL)
{
card.write_command(cmdbuffer[bufindr]);
- SERIAL_PROTOCOLLNPGM("ok");
+ SERIAL_PROTOCOLLNPGM(MSG_OK);
}
else
{
card.closefile();
- SERIAL_PROTOCOLLNPGM("Done saving file.");
+ SERIAL_PROTOCOLLNPGM(MSG_FILE_SAVED);
}
}
else
gcode_N = (strtol(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL, 10));
if(gcode_N != gcode_LastN+1 && (strstr(cmdbuffer[bufindw], "M110") == NULL) ) {
SERIAL_ERROR_START;
- SERIAL_ERRORPGM("Line Number is not Last Line Number+1, Last Line:");
+ SERIAL_ERRORPGM(MSG_ERR_LINE_NO);
SERIAL_ERRORLN(gcode_LastN);
//Serial.println(gcode_N);
FlushSerialRequestResend();
if( (int)(strtod(&cmdbuffer[bufindw][strchr_pointer - cmdbuffer[bufindw] + 1], NULL)) != checksum) {
SERIAL_ERROR_START;
- SERIAL_ERRORPGM("checksum mismatch, Last Line:");
+ SERIAL_ERRORPGM(MSG_ERR_CHECKSUM_MISMATCH);
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
else
{
SERIAL_ERROR_START;
- SERIAL_ERRORPGM("No Checksum with line number, Last Line:");
+ SERIAL_ERRORPGM(MSG_ERR_NO_CHECKSUM);
SERIAL_ERRORLN(gcode_LastN);
FlushSerialRequestResend();
serial_count = 0;
if((strstr(cmdbuffer[bufindw], "*") != NULL))
{
SERIAL_ERROR_START;
- SERIAL_ERRORPGM("No Line Number with checksum, Last Line:");
+ SERIAL_ERRORPGM(MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM);
SERIAL_ERRORLN(gcode_LastN);
serial_count = 0;
return;
if(card.saving)
break;
#endif //SDSUPPORT
- SERIAL_PROTOCOLLNPGM("ok");
+ SERIAL_PROTOCOLLNPGM(MSG_OK);
break;
default:
break;
if(serial_char == '\n' || serial_char == '\r' || serial_char == ':' || serial_count >= (MAX_CMD_SIZE - 1)||n==-1)
{
if(card.eof()){
- SERIAL_PROTOCOLLNPGM("Done printing file");
+ SERIAL_PROTOCOLLNPGM(MSG_FILE_PRINTED);
stoptime=millis();
char time[30];
unsigned long t=(stoptime-starttime)/1000;
prepare_arc_move(false);
return;
case 4: // G4 dwell
- LCD_MESSAGEPGM("DWELL...");
+ LCD_MESSAGEPGM(MSG_DWELL);
codenum = 0;
if(code_seen('P')) codenum = code_value(); // milliseconds to wait
if(code_seen('S')) codenum = code_value() * 1000; // seconds to wait
switch( (int)code_value() )
{
case 17:
- LCD_MESSAGEPGM("No move.");
+ LCD_MESSAGEPGM(MSG_NO_MOVE);
enable_x();
enable_y();
enable_z();
#ifdef SDSUPPORT
case 20: // M20 - list SD card
- SERIAL_PROTOCOLLNPGM("Begin file list");
+ SERIAL_PROTOCOLLNPGM(MSG_BEGIN_FILE_LIST);
card.ls();
- SERIAL_PROTOCOLLNPGM("End file list");
+ SERIAL_PROTOCOLLNPGM(MSG_END_FILE_LIST);
break;
case 21: // M21 - init SD card
tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
- SERIAL_ECHO("M104 Invalid extruder ");
+ SERIAL_ECHO(MSG_M104_INVALID_EXTRUDER);
SERIAL_ECHOLN(tmp_extruder);
break;
}
tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
- SERIAL_ECHO("M105 Invalid extruder ");
+ SERIAL_ECHO(MSG_M105_INVALID_EXTRUDER);
SERIAL_ECHOLN(tmp_extruder);
break;
}
#endif //TEMP_BED_PIN
#else
SERIAL_ERROR_START;
- SERIAL_ERRORLNPGM("No thermistors - no temp");
+ SERIAL_ERRORLNPGM(MSG_ERR_NO_THERMISTORS);
#endif
#ifdef PIDTEMP
SERIAL_PROTOCOLPGM(" @:");
tmp_extruder = code_value();
if(tmp_extruder >= EXTRUDERS) {
SERIAL_ECHO_START;
- SERIAL_ECHO("M109 Invalid extruder ");
+ SERIAL_ECHO(MSG_M109_INVALID_EXTRUDER);
SERIAL_ECHOLN(tmp_extruder);
break;
}
}
- LCD_MESSAGEPGM("Heating...");
+ LCD_MESSAGEPGM(MSG_HEATING);
#ifdef AUTOTEMP
autotemp_enabled=false;
#endif
}
#endif //TEMP_RESIDENCY_TIME
}
- LCD_MESSAGEPGM("Heating done.");
+ LCD_MESSAGEPGM(MSG_HEATING_COMPLETE);
starttime=millis();
previous_millis_cmd = millis();
}
break;
case 190: // M190 - Wait for bed heater to reach target.
#if TEMP_BED_PIN > -1
- LCD_MESSAGEPGM("Bed Heating.");
+ LCD_MESSAGEPGM(MSG_BED_HEATING);
if (code_seen('S')) setTargetBed(code_value());
codenum = millis();
while(isHeatingBed())
}
manage_heater();
}
- LCD_MESSAGEPGM("Bed done.");
+ LCD_MESSAGEPGM(MSG_BED_DONE);
previous_millis_cmd = millis();
#endif
break;
disable_e2();
}
#endif
- LCD_MESSAGEPGM("Partial Release");
+ LCD_MESSAGEPGM(MSG_PART_RELEASE);
}
}
break;
}
break;
case 115: // M115
- SerialprintPGM("FIRMWARE_NAME:Marlin; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n");
+ SerialprintPGM(MSG_M115_REPORT);
break;
case 117: // M117 display message
LCD_MESSAGE(cmdbuffer[bufindr]+5);
SERIAL_PROTOCOLPGM("E:");
SERIAL_PROTOCOL(current_position[E_AXIS]);
- SERIAL_PROTOCOLPGM(" Count X:");
+ SERIAL_PROTOCOLPGM(MSG_COUNT_X);
SERIAL_PROTOCOL(float(st_get_position(X_AXIS))/axis_steps_per_unit[X_AXIS]);
SERIAL_PROTOCOLPGM("Y:");
SERIAL_PROTOCOL(float(st_get_position(Y_AXIS))/axis_steps_per_unit[Y_AXIS]);
break;
case 119: // M119
#if (X_MIN_PIN > -1)
- SERIAL_PROTOCOLPGM("x_min:");
+ SERIAL_PROTOCOLPGM(MSG_X_MIN);
SERIAL_PROTOCOL(((READ(X_MIN_PIN)^X_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
#if (X_MAX_PIN > -1)
- SERIAL_PROTOCOLPGM("x_max:");
+ SERIAL_PROTOCOLPGM(MSG_X_MAX);
SERIAL_PROTOCOL(((READ(X_MAX_PIN)^X_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
#if (Y_MIN_PIN > -1)
- SERIAL_PROTOCOLPGM("y_min:");
+ SERIAL_PROTOCOLPGM(MSG_Y_MIN);
SERIAL_PROTOCOL(((READ(Y_MIN_PIN)^Y_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
#if (Y_MAX_PIN > -1)
- SERIAL_PROTOCOLPGM("y_max:");
+ SERIAL_PROTOCOLPGM(MSG_Y_MAX);
SERIAL_PROTOCOL(((READ(Y_MAX_PIN)^Y_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
#if (Z_MIN_PIN > -1)
- SERIAL_PROTOCOLPGM("z_min:");
+ SERIAL_PROTOCOLPGM(MSG_Z_MIN);
SERIAL_PROTOCOL(((READ(Z_MIN_PIN)^Z_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
#if (Z_MAX_PIN > -1)
- SERIAL_PROTOCOLPGM("z_max:");
+ SERIAL_PROTOCOLPGM(MSG_Z_MAX);
SERIAL_PROTOCOL(((READ(Z_MAX_PIN)^Z_ENDSTOPS_INVERTING)?"H ":"L "));
#endif
SERIAL_PROTOCOLLN("");
if(code_seen('C')) Kc = code_value();
#endif
updatePID();
- SERIAL_PROTOCOL("ok p:");
+ SERIAL_PROTOCOL(MSG_OK);
+ SERIAL_PROTOCOL(" p:");
SERIAL_PROTOCOL(Kp);
SERIAL_PROTOCOL(" i:");
SERIAL_PROTOCOL(Ki/PID_dT);
SERIAL_ECHO_START;
SERIAL_ECHO("T");
SERIAL_ECHO(tmp_extruder);
- SERIAL_ECHOLN("Invalid extruder");
+ SERIAL_ECHOLN(MSG_INVALID_EXTRUDER);
}
else {
active_extruder = tmp_extruder;
SERIAL_ECHO_START;
- SERIAL_ECHO("Active Extruder: ");
+ SERIAL_ECHO(MSG_ACTIVE_EXTRUDER);
SERIAL_PROTOCOLLN((int)active_extruder);
}
}
else
{
SERIAL_ECHO_START;
- SERIAL_ECHOPGM("Unknown command:\"");
+ SERIAL_ECHOPGM(MSG_UNKNOWN_COMMAND);
SERIAL_ECHO(cmdbuffer[bufindr]);
SERIAL_ECHOLNPGM("\"");
}
{
//char cmdbuffer[bufindr][100]="Resend:";
MYSERIAL.flush();
- SERIAL_PROTOCOLPGM("Resend:");
+ SERIAL_PROTOCOLPGM(MSG_RESEND);
SERIAL_PROTOCOLLN(gcode_LastN + 1);
ClearToSend();
}
if(fromsd[bufindr])
return;
#endif //SDSUPPORT
- SERIAL_PROTOCOLLNPGM("ok");
+ SERIAL_PROTOCOLLNPGM(MSG_OK);
}
void get_coordinates()
if(PS_ON_PIN > -1) pinMode(PS_ON_PIN,INPUT);
SERIAL_ERROR_START;
- SERIAL_ERRORLNPGM("Printer halted. kill() called !!");
- LCD_MESSAGEPGM("KILLED. ");
+ SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
+ LCD_MESSAGEPGM(MSG_KILLED);
suicide();
while(1); // Wait for reset
}
--- /dev/null
+
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual Studio 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "Marlin", "Marlin.vcxproj", "{A6365572-B176-4C2F-9B18-A75B62059578}"
+EndProject
+Global
+ GlobalSection(SolutionConfigurationPlatforms) = preSolution
+ Debug|Win32 = Debug|Win32
+ Release|Win32 = Release|Win32
+ EndGlobalSection
+ GlobalSection(ProjectConfigurationPlatforms) = postSolution
+ {A6365572-B176-4C2F-9B18-A75B62059578}.Debug|Win32.ActiveCfg = Debug|Win32
+ {A6365572-B176-4C2F-9B18-A75B62059578}.Debug|Win32.Build.0 = Debug|Win32
+ {A6365572-B176-4C2F-9B18-A75B62059578}.Release|Win32.ActiveCfg = Release|Win32
+ {A6365572-B176-4C2F-9B18-A75B62059578}.Release|Win32.Build.0 = Release|Win32
+ EndGlobalSection
+ GlobalSection(SolutionProperties) = preSolution
+ HideSolutionNode = FALSE
+ EndGlobalSection
+EndGlobal
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup Label="ProjectConfigurations">
+ <ProjectConfiguration Include="Debug|Win32">
+ <Configuration>Debug</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ <ProjectConfiguration Include="Release|Win32">
+ <Configuration>Release</Configuration>
+ <Platform>Win32</Platform>
+ </ProjectConfiguration>
+ </ItemGroup>
+ <PropertyGroup Label="Globals">
+ <ProjectGuid>{A6365572-B176-4C2F-9B18-A75B62059578}</ProjectGuid>
+ <RootNamespace>Marlin</RootNamespace>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>true</UseDebugLibraries>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+ <ConfigurationType>Application</ConfigurationType>
+ <UseDebugLibraries>false</UseDebugLibraries>
+ <WholeProgramOptimization>true</WholeProgramOptimization>
+ <CharacterSet>MultiByte</CharacterSet>
+ </PropertyGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+ <ImportGroup Label="ExtensionSettings">
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+ </ImportGroup>
+ <PropertyGroup Label="UserMacros" />
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <IncludePath>C:\arduino-0023\hardware\arduino\cores\arduino;c:\arduino-0023\hardware\tools\avr\avr\include\;c:\arduino-0023\hardware\tools\avr\avr\include\avr\;c:\arduino-0023\hardware\tools\avr\avr\;c:\arduino-0023\hardware\tools\avr\lib\gcc\avr\4.3.2\include\;C:\arduino-0023\libraries\LiquidCrystal;C:\arduino-0023\libraries\LiquidCrystal\utility;</IncludePath>
+ </PropertyGroup>
+ <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <IncludePath>C:\arduino-0023\hardware\arduino\cores\arduino;c:\arduino-0023\hardware\tools\avr\avr\include\;c:\arduino-0023\hardware\tools\avr\avr\include\avr\;c:\arduino-0023\hardware\tools\avr\avr\;c:\arduino-0023\hardware\tools\avr\lib\gcc\avr\4.3.2\include\;C:\arduino-0023\libraries\LiquidCrystal;C:\arduino-0023\libraries\LiquidCrystal\utility;</IncludePath>
+ </PropertyGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>Disabled</Optimization>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+ <ClCompile>
+ <WarningLevel>Level3</WarningLevel>
+ <Optimization>MaxSpeed</Optimization>
+ <FunctionLevelLinking>true</FunctionLevelLinking>
+ <IntrinsicFunctions>true</IntrinsicFunctions>
+ </ClCompile>
+ <Link>
+ <GenerateDebugInformation>true</GenerateDebugInformation>
+ <EnableCOMDATFolding>true</EnableCOMDATFolding>
+ <OptimizeReferences>true</OptimizeReferences>
+ </Link>
+ </ItemDefinitionGroup>
+ <ItemGroup>
+ <None Include="Marlin.pde" />
+ <None Include="ultralcd.pde" />
+ <None Include="watchdog.pde" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="cardreader.cpp" />
+ <ClCompile Include="MarlinSerial.cpp" />
+ <ClCompile Include="motion_control.cpp" />
+ <ClCompile Include="planner.cpp" />
+ <ClCompile Include="Sd2Card.cpp" />
+ <ClCompile Include="SdBaseFile.cpp" />
+ <ClCompile Include="SdFatUtil.cpp" />
+ <ClCompile Include="SdFile.cpp" />
+ <ClCompile Include="SdVolume.cpp" />
+ <ClCompile Include="stepper.cpp" />
+ <ClCompile Include="temperature.cpp" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="cardreader.h" />
+ <ClInclude Include="Configuration.h" />
+ <ClInclude Include="Configuration_adv.h" />
+ <ClInclude Include="EEPROMwrite.h" />
+ <ClInclude Include="fastio.h" />
+ <ClInclude Include="language.h" />
+ <ClInclude Include="Marlin.h" />
+ <ClInclude Include="MarlinSerial.h" />
+ <ClInclude Include="motion_control.h" />
+ <ClInclude Include="pins.h" />
+ <ClInclude Include="planner.h" />
+ <ClInclude Include="Sd2Card.h" />
+ <ClInclude Include="Sd2PinMap.h" />
+ <ClInclude Include="SdBaseFile.h" />
+ <ClInclude Include="SdFatConfig.h" />
+ <ClInclude Include="SdFatStructs.h" />
+ <ClInclude Include="SdFatUtil.h" />
+ <ClInclude Include="SdFile.h" />
+ <ClInclude Include="SdInfo.h" />
+ <ClInclude Include="SdVolume.h" />
+ <ClInclude Include="speed_lookuptable.h" />
+ <ClInclude Include="stepper.h" />
+ <ClInclude Include="temperature.h" />
+ <ClInclude Include="thermistortables.h" />
+ <ClInclude Include="ultralcd.h" />
+ <ClInclude Include="watchdog.h" />
+ <ClInclude Include="wiring.h" />
+ </ItemGroup>
+ <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+ <ImportGroup Label="ExtensionTargets">
+ </ImportGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+ <ItemGroup>
+ <Filter Include="Source Files">
+ <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+ <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+ </Filter>
+ <Filter Include="Header Files">
+ <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+ <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+ </Filter>
+ <Filter Include="Resource Files">
+ <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+ <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+ </Filter>
+ </ItemGroup>
+ <ItemGroup>
+ <None Include="Marlin.pde" />
+ <None Include="ultralcd.pde" />
+ <None Include="watchdog.pde" />
+ </ItemGroup>
+ <ItemGroup>
+ <ClCompile Include="cardreader.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="MarlinSerial.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="motion_control.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="planner.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="Sd2Card.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="SdBaseFile.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="SdFatUtil.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="SdFile.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="SdVolume.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="stepper.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ <ClCompile Include="temperature.cpp">
+ <Filter>Source Files</Filter>
+ </ClCompile>
+ </ItemGroup>
+ <ItemGroup>
+ <ClInclude Include="cardreader.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="Configuration.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="Configuration_adv.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="EEPROMwrite.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="fastio.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="language.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="Marlin.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="MarlinSerial.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="motion_control.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="pins.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="planner.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="Sd2Card.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="Sd2PinMap.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdBaseFile.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdFatConfig.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdFatStructs.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdFatUtil.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdFile.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdInfo.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="SdVolume.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="speed_lookuptable.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="stepper.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="temperature.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="thermistortables.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="ultralcd.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="watchdog.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ <ClInclude Include="wiring.h">
+ <Filter>Header Files</Filter>
+ </ClInclude>
+ </ItemGroup>
+</Project>
\ No newline at end of file
--- /dev/null
+<?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+</Project>
\ No newline at end of file
#include "ultralcd.h"
#include "stepper.h"
#include "temperature.h"
+#include "language.h"
+
#ifdef SDSUPPORT
if(lsAction==LS_SerialPrint)
{
SERIAL_ECHO_START;
- SERIAL_ECHOLN("Cannot open subdir");
+ SERIAL_ECHOLN(MSG_SD_CANT_OPEN_SUBDIR);
SERIAL_ECHOLN(lfilename);
}
}
{
//if (!card.init(SPI_HALF_SPEED,SDSS))
SERIAL_ECHO_START;
- SERIAL_ECHOLNPGM("SD init fail");
+ SERIAL_ECHOLNPGM(MSG_SD_INIT_FAIL);
}
else if (!volume.init(&card))
{
SERIAL_ERROR_START;
- SERIAL_ERRORLNPGM("volume.init failed");
+ SERIAL_ERRORLNPGM(MSG_SD_VOL_INIT_FAIL);
}
else if (!root.openRoot(&volume))
{
SERIAL_ERROR_START;
- SERIAL_ERRORLNPGM("openRoot failed");
+ SERIAL_ERRORLNPGM(MSG_SD_OPENROOT_FAIL);
}
else
{
cardOK = true;
SERIAL_ECHO_START;
- SERIAL_ECHOLNPGM("SD card ok");
+ SERIAL_ECHOLNPGM(MSG_SD_CARD_OK);
}
curDir=&root;
if(!workDir.openRoot(&volume))
{
- SERIAL_ECHOLNPGM("workDir open failed");
+ SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
}
}
curDir=&root;
if(!workDir.openRoot(&volume))
{
- SERIAL_ECHOLNPGM("workDir open failed");
+ SERIAL_ECHOLNPGM(MSG_SD_WORKDIR_FAIL);
}
}
void CardReader::release()
SERIAL_ECHOLN(subdirname);
if(!myDir.open(curDir,subdirname,O_READ))
{
- SERIAL_PROTOCOLPGM("open failed, File: ");
+ SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(subdirname);
SERIAL_PROTOCOLLNPGM(".");
return;
if (file.open(curDir, fname, O_READ))
{
filesize = file.fileSize();
- SERIAL_PROTOCOLPGM("File opened:");
+ SERIAL_PROTOCOLPGM(MSG_SD_FILE_OPENED);
SERIAL_PROTOCOL(fname);
- SERIAL_PROTOCOLPGM(" Size:");
+ SERIAL_PROTOCOLPGM(MSG_SD_SIZE);
SERIAL_PROTOCOLLN(filesize);
sdpos = 0;
- SERIAL_PROTOCOLLNPGM("File selected");
+ SERIAL_PROTOCOLLNPGM(MSG_SD_FILE_SELECTED);
LCD_MESSAGE(fname);
}
else
{
- SERIAL_PROTOCOLPGM("open failed, File: ");
+ SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
{ //write
if (!file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC))
{
- SERIAL_PROTOCOLPGM("open failed, File: ");
+ SERIAL_PROTOCOLPGM(MSG_SD_OPEN_FILE_FAIL);
SERIAL_PROTOCOL(fname);
SERIAL_PROTOCOLLNPGM(".");
}
else
{
saving = true;
- SERIAL_PROTOCOLPGM("Writing to file: ");
+ SERIAL_PROTOCOLPGM(MSG_SD_WRITE_TO_FILE);
SERIAL_PROTOCOLLN(name);
LCD_MESSAGE(fname);
}
void CardReader::getStatus()
{
if(cardOK){
- SERIAL_PROTOCOLPGM("SD printing byte ");
+ SERIAL_PROTOCOLPGM(MSG_SD_PRINTING_BYTE);
SERIAL_PROTOCOL(sdpos);
SERIAL_PROTOCOLPGM("/");
SERIAL_PROTOCOLLN(filesize);
}
else{
- SERIAL_PROTOCOLLNPGM("Not SD printing");
+ SERIAL_PROTOCOLLNPGM(MSG_SD_NOT_PRINTING);
}
}
void CardReader::write_command(char *buf)
if (file.writeError)
{
SERIAL_ERROR_START;
- SERIAL_ERRORLNPGM("error writing to file");
+ SERIAL_ERRORLNPGM(MSG_SD_ERR_WRITE_TO_FILE);
}
}
if(!newfile.open(*parent,relpath, O_READ))
{
SERIAL_ECHO_START;
- SERIAL_ECHOPGM("Cannot enter subdir:");
+ SERIAL_ECHOPGM(MSG_SD_CANT_ENTER_SUBDIR);
SERIAL_ECHOLN(relpath);
}
else
// LCD Menu Messages
+// #define WELCOME_MSG "UltiMARLIN Ready."
#define WELCOME_MSG "RepRap Ready."
- #define MSG_SD_INSERTED "Card Ready"
- #define MSG_SD_REMOVED "Card Initiate"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT_PLA " Preheat PLA"
- #define MSG_PREHEAT_ABS " Preheat ABS"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
-
-#endif
-
-#if LANGUAGE_CHOICE == 2
-
-// LCD Menu Messages
-
- #define WELCOME_MSG "UltiMARLIN Ready."
#define MSG_SD_INSERTED "Card inserted"
#define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
+ #define MSG_MOVE_AXIS " Move Axis \x7E"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
+ #define MSG_PREPARE_ALT " Prepare \003"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_DWELL "DWELL..."
+ #define MSG_NO_MOVE "No move."
+ #define MSG_PART_RELEASE "Partial Release"
+ #define MSG_KILLED "KILLED. "
+ #define MSG_PREHEAT_PLA " Preheat PLA"
+ #define MSG_PREHEAT_ABS " Preheat ABS"
+ #define MSG_STEPPER_RELEASED "Released."
-#endif
-#if LANGUAGE_CHOICE == 3
+// Serial Console Messages
-// LCD Menu Messages
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " External Reset"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin: "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Last Updated: "
+ #define MSG_FREE_MEMORY " Free Memory: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Done saving file."
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+ #define MSG_FILE_PRINTED "Done printing file"
+ #define MSG_BEGIN_FILE_LIST "Begin file list"
+ #define MSG_END_FILE_LIST "End file list"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+ #define MSG_HEATING "Heating..."
+ #define MSG_HEATING_COMPLETE "Heating done."
+ #define MSG_BED_HEATING "Bed Heating."
+ #define MSG_BED_DONE "Bed done."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+ #define MSG_COUNT_X " Count X:"
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"
+ #define MSG_RESEND "Resend:"
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"
+ #define MSG_X_MIN "x_min:"
+ #define MSG_X_MAX "x_max:"
+ #define MSG_Y_MIN "y_min:"
+ #define MSG_Y_MAX "y_max:"
+ #define MSG_Z_MIN "z_min:"
+ #define MSG_Z_MAX "z_max:"
- #define WELCOME_MSG "RepRap Ready."
- #define MSG_SD_INSERTED "Card Ready"
- #define MSG_SD_REMOVED "Card Initiate"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+ #define MSG_SD_INIT_FAIL "SD init fail"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+ #define MSG_SD_FILE_OPENED "File opened:"
+ #define MSG_SD_SIZE " Size:"
+ #define MSG_SD_FILE_SELECTED "File selected"
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Not SD printing"
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
-#endif
+ #define MSG_STEPPER_TO_HIGH "Steprate to high : "
+ #define MSG_ENDSTOPS_HIT "endstops hit: "
+ #define MSG_ERR_COLD_EXTRUDE_STOP " cold extrusion prevented"
+ #define MSG_ERR_LONG_EXTRUDE_STOP " too long extrusion prevented"
-#if LANGUAGE_CHOICE == 4
+#endif
+#if LANGUAGE_CHOICE == 2
// LCD Menu Messages
- #define WELCOME_MSG "RepRap Ready."
- #define MSG_SD_INSERTED "Card Ready"
- #define MSG_SD_REMOVED "Card Initiate"
+ #define WELCOME_MSG "UltiMARLIN Ready."
+
+ #define MSG_SD_INSERTED "Card inserted"
+ #define MSG_SD_REMOVED "Card removed"
#define MSG_MAIN " Main \003"
#define MSG_AUTOSTART " Autostart"
#define MSG_DISABLE_STEPPERS " Disable Steppers"
#define MSG_PREHEAT " Preheat"
#define MSG_COOLDOWN " Cooldown"
#define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
+ #define MSG_MOVE_AXIS " Move Axis \x7E"
#define MSG_SPEED " Speed:"
#define MSG_NOZZLE " \002Nozzle:"
#define MSG_BED " \002Bed:"
#define MSG_REFRESH "\004Refresh"
#define MSG_WATCH " Watch \003"
#define MSG_PREPARE " Prepare \x7E"
+ #define MSG_PREPARE_ALT " Prepare \003"
#define MSG_CONTROL_ARROW " Control \x7E"
#define MSG_TUNE " Tune \x7E"
#define MSG_STOP_PRINT " Stop Print \x7E"
#define MSG_CARD_MENU " Card Menu \x7E"
#define MSG_NO_CARD " No Card"
#define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_DWELL "DWELL..."
+ #define MSG_NO_MOVE "No move."
+ #define MSG_PART_RELEASE "Partial Release"
+ #define MSG_KILLED "KILLED. "
+ #define MSG_PREHEAT_PLA " Preheat PLA"
+ #define MSG_PREHEAT_ABS " Preheat ABS"
-#endif
-#if LANGUAGE_CHOICE == 5
-// LCD Menu Messages
+// Serial Console Messages
- #define WELCOME_MSG "RepRap Ready."
- #define MSG_SD_INSERTED "Card Ready"
- #define MSG_SD_REMOVED "Card Initiate"
- #define MSG_MAIN " Main \003"
- #define MSG_AUTOSTART " Autostart"
- #define MSG_DISABLE_STEPPERS " Disable Steppers"
- #define MSG_AUTO_HOME " Auto Home"
- #define MSG_SET_ORIGIN " Set Origin"
- #define MSG_PREHEAT " Preheat"
- #define MSG_COOLDOWN " Cooldown"
- #define MSG_EXTRUDE " Extrude"
- #define MSG_MOVE_AXIS " Move Axis \x7E"
- #define MSG_SPEED " Speed:"
- #define MSG_NOZZLE " \002Nozzle:"
- #define MSG_BED " \002Bed:"
- #define MSG_FAN_SPEED " Fan speed:"
- #define MSG_FLOW " Flow:"
- #define MSG_CONTROL " Control \003"
- #define MSG_MIN " \002 Min:"
- #define MSG_MAX " \002 Max:"
- #define MSG_FACTOR " \002 Fact:"
- #define MSG_AUTOTEMP " Autotemp:"
- #define MSG_ON "On "
- #define MSG_OFF "Off"
- #define MSG_PID_P " PID-P: "
- #define MSG_PID_I " PID-I: "
- #define MSG_PID_D " PID-D: "
- #define MSG_PID_C " PID-C: "
- #define MSG_ACC " Acc:"
- #define MSG_VXY_JERK " Vxy-jerk: "
- #define MSG_VMAX " Vmax "
- #define MSG_X "x:"
- #define MSG_Y "y:"
- #define MSG_Z "z:"
- #define MSG_E "e:"
- #define MSG_VMIN " Vmin:"
- #define MSG_VTRAV_MIN " VTrav min:"
- #define MSG_AMAX " Amax "
- #define MSG_A_RETRACT " A-retract:"
- #define MSG_XSTEPS " Xsteps/mm:"
- #define MSG_YSTEPS " Ysteps/mm:"
- #define MSG_ZSTEPS " Zsteps/mm:"
- #define MSG_ESTEPS " Esteps/mm:"
- #define MSG_MAIN_WIDE " Main \003"
- #define MSG_TEMPERATURE_WIDE " Temperature \x7E"
- #define MSG_MOTION_WIDE " Motion \x7E"
- #define MSG_STORE_EPROM " Store EPROM"
- #define MSG_LOAD_EPROM " Load EPROM"
- #define MSG_RESTORE_FAILSAFE " Restore Failsafe"
- #define MSG_REFRESH "\004Refresh"
- #define MSG_WATCH " Watch \003"
- #define MSG_PREPARE " Prepare \x7E"
- #define MSG_CONTROL_ARROW " Control \x7E"
- #define MSG_TUNE " Tune \x7E"
- #define MSG_STOP_PRINT " Stop Print \x7E"
- #define MSG_CARD_MENU " Card Menu \x7E"
- #define MSG_NO_CARD " No Card"
- #define MSG_SERIAL_ERROR_MENU_STRUCTURE "Something is wrong in the MenuStructure."
+ #define MSG_Enqueing "enqueing \""
+ #define MSG_POWERUP "PowerUp"
+ #define MSG_EXTERNAL_RESET " External Reset"
+ #define MSG_BROWNOUT_RESET " Brown out Reset"
+ #define MSG_WATCHDOG_RESET " Watchdog Reset"
+ #define MSG_SOFTWARE_RESET " Software Reset"
+ #define MSG_MARLIN "Marlin: "
+ #define MSG_AUTHOR " | Author: "
+ #define MSG_CONFIGURATION_VER " Last Updated: "
+ #define MSG_FREE_MEMORY " Free Memory: "
+ #define MSG_PLANNER_BUFFER_BYTES " PlannerBufferBytes: "
+ #define MSG_OK "ok"
+ #define MSG_FILE_SAVED "Done saving file."
+ #define MSG_ERR_LINE_NO "Line Number is not Last Line Number+1, Last Line:"
+ #define MSG_ERR_CHECKSUM_MISMATCH "checksum mismatch, Last Line:"
+ #define MSG_ERR_NO_CHECKSUM "No Checksum with line number, Last Line:"
+ #define MSG_ERR_NO_LINENUMBER_WITH_CHECKSUM "No Line Number with checksum, Last Line:"
+ #define MSG_FILE_PRINTED "Done printing file"
+ #define MSG_BEGIN_FILE_LIST "Begin file list"
+ #define MSG_END_FILE_LIST "End file list"
+ #define MSG_M104_INVALID_EXTRUDER "M104 Invalid extruder "
+ #define MSG_M105_INVALID_EXTRUDER "M105 Invalid extruder "
+ #define MSG_ERR_NO_THERMISTORS "No thermistors - no temp"
+ #define MSG_M109_INVALID_EXTRUDER "M109 Invalid extruder "
+ #define MSG_HEATING "Heating..."
+ #define MSG_HEATING_COMPLETE "Heating done."
+ #define MSG_BED_HEATING "Bed Heating."
+ #define MSG_BED_DONE "Bed done."
+ #define MSG_M115_REPORT "FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:Mendel EXTRUDER_COUNT:1\n"
+ #define MSG_COUNT_X " Count X:"
+ #define MSG_ERR_KILLED "Printer halted. kill() called !!"
+ #define MSG_RESEND "Resend:"
+ #define MSG_UNKNOWN_COMMAND "Unknown command:\""
+ #define MSG_ACTIVE_EXTRUDER "Active Extruder: "
+ #define MSG_INVALID_EXTRUDER "Invalid extruder"
+ #define MSG_X_MIN "x_min:"
+ #define MSG_X_MAX "x_max:"
+ #define MSG_Y_MIN "y_min:"
+ #define MSG_Y_MAX "y_max:"
+ #define MSG_Z_MIN "z_min:"
+ #define MSG_Z_MAX "z_max:"
-#endif
+ #define MSG_SD_CANT_OPEN_SUBDIR "Cannot open subdir"
+ #define MSG_SD_INIT_FAIL "SD init fail"
+ #define MSG_SD_VOL_INIT_FAIL "volume.init failed"
+ #define MSG_SD_OPENROOT_FAIL "openRoot failed"
+ #define MSG_SD_CARD_OK "SD card ok"
+ #define MSG_SD_WORKDIR_FAIL "workDir open failed"
+ #define MSG_SD_OPEN_FILE_FAIL "open failed, File: "
+ #define MSG_SD_FILE_OPENED "File opened:"
+ #define MSG_SD_SIZE " Size:"
+ #define MSG_SD_FILE_SELECTED "File selected"
+ #define MSG_SD_WRITE_TO_FILE "Writing to file: "
+ #define MSG_SD_PRINTING_BYTE "SD printing byte "
+ #define MSG_SD_NOT_PRINTING "Not SD printing"
+ #define MSG_SD_ERR_WRITE_TO_FILE "error writing to file"
+ #define MSG_SD_CANT_ENTER_SUBDIR "Cannot enter subdir:"
+#endif
#endif // ifndef LANGUAGE_H
#include "stepper.h"
#include "temperature.h"
#include "ultralcd.h"
+#include "language.h"
//===========================================================================
//=============================public variables ============================
{
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
- SERIAL_ECHOLNPGM(" cold extrusion prevented");
+ SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP);
}
if(labs(target[E_AXIS]-position[E_AXIS])>axis_steps_per_unit[E_AXIS]*EXTRUDE_MAXLENGTH)
{
position[E_AXIS]=target[E_AXIS]; //behave as if the move really took place, but ignore E part
SERIAL_ECHO_START;
- SERIAL_ECHOLNPGM(" too long extrusion prevented");
+ SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP);
}
#endif
#include "planner.h"
#include "temperature.h"
#include "ultralcd.h"
-
+#include "language.h"
#include "speed_lookuptable.h"
{
if( endstop_x_hit || endstop_y_hit || endstop_z_hit) {
SERIAL_ECHO_START;
- SERIAL_ECHOPGM("endstops hit: ");
+ SERIAL_ECHOPGM(MSG_ENDSTOPS_HIT);
if(endstop_x_hit) {
SERIAL_ECHOPAIR(" X:",(float)endstops_trigsteps[X_AXIS]/axis_steps_per_unit[X_AXIS]);
}
timer = (unsigned short)pgm_read_word_near(table_address);
timer -= (((unsigned short)pgm_read_word_near(table_address+2) * (unsigned char)(step_rate & 0x0007))>>3);
}
- if(timer < 100) { timer = 100; MYSERIAL.print("Steprate to high : "); MYSERIAL.println(step_rate); }//(20kHz this should never happen)
+ if(timer < 100) { timer = 100; MYSERIAL.print(MSG_STEPPER_TO_HIGH); MYSERIAL.println(step_rate); }//(20kHz this should never happen)
return timer;
}
void finishAndDisableSteppers()
{
st_synchronize();
- LCD_MESSAGEPGM("Released.");
+ LCD_MESSAGEPGM(MSG_STEPPER_RELEASED);
disable_x();
disable_y();
disable_z();
~ianmdlvl / marlin.git / commitdiff