#USE_KLIBC = true
# If you are running a cross compiler, you may want to set this
-# to something more interesting, like "arm-linux-". I you want
+# to something more interesting, like "arm-linux-". If you want
# to compile vs uClibc, that can be done here as well.
CROSS = #/usr/i386-linux-uclibc/usr/bin/i386-uclibc-
CC = $(CROSS)gcc
-C $$target $@ ; \
done ; \
-DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v CVS | grep -v "\.tar\.gz" | grep -v "\/\." | grep -v releases | grep -v BitKeeper | grep -v SCCS | grep -v "\.tdb" | grep -v "test\/sys" | sort )
+DISTFILES = $(shell find . \( -not -name '.' \) -print | grep -v -e CVS -e "\.tar\.gz$" -e "\/\." -e releases -e BitKeeper -e SCCS -e "\.tdb$" -e test/sys | sort )
DISTDIR := $(RELEASE_NAME)
srcdir = .
release: clean
$(INSTALL_DATA) $(LOCAL_CFG_DIR)/udev.permissions $(DESTDIR)$(configdir); \
fi
-
-
install: install-config install-dbus-policy all
$(INSTALL) -d $(DESTDIR)$(udevdir)
$(INSTALL) -d $(DESTDIR)$(hotplugdir)
$(INSTALL_PROGRAM) -D $(ROOT) $(DESTDIR)$(sbindir)/$(ROOT)
- $(INSTALL_PROGRAM) -D etc/init.d/udev $(DESTDIR)$(initdir)/udev
+ @if [ "x$(USE_LSB)" = "xtrue" ]; then \
+ $(INSTALL_PROGRAM) -D etc/init.d/udev.init.LSB $(DESTDIR)$(initdir)/udev
+ ln -s $(DESTDIR)$(initdir)/udev $(sbin_dir)/rcudev
+ else
+ $(INSTALL_PROGRAM) -D etc/init.d/udev $(DESTDIR)$(initdir)/udev
+ fi
$(INSTALL_DATA) -D udev.8 $(DESTDIR)$(mandir)/man8/udev.8
- rm -f $(DESTDIR)$(hotplugdir)/udev.hotplug
- ln -f -s $(sbindir)/$(ROOT) $(DESTDIR)$(hotplugdir)/udev.hotplug
$(MAKE) prefix=$(prefix) LD="$(LD)" SYSFS="$(SYSFS)" \
-C $$target $@ ; \
done ; \
-
-
. /etc/rc.d/init.d/functions
-udev_dir=/udev
+. /etc/udev/udev.conf
+
sysfs_dir=/sys
bin=/sbin/udev
case "$1" in
start)
- if [ ! -d $udev_dir ]; then
- mkdir $udev_dir
- fi
if [ ! -d $sysfs_dir ]; then
exit 1
fi
+ if [ ! -d $udev_root ]; then
+ mkdir $udev_root
+ fi
# propogate /udev from /sys - we only need this while we do not
# have initramfs and an early user-space with which to do early
# device bring up
run_udev
;;
status)
- if [ -d $udev_dir ]; then
+ if [ -d $udev_root ]; then
echo "the udev device node directory exists"
else
echo "the udev device node directory does not exist"
--- /dev/null
+#! /bin/sh
+#
+# Author: Rolf Eike Beer <eike-hotplug@sf-tec.de>
+# derived from original RedHat udev init script
+# based on the SuSE 9.0 template (c) 1995-2002 SuSE Linux AG
+#
+# /etc/init.d/udev
+# and its symbolic link
+# /(usr/)sbin/rcudev
+#
+# System startup script for udev
+#
+# LSB compatible service control script; see http://www.linuxbase.org/spec/
+#
+### BEGIN INIT INFO
+# Provides: udev
+# Required-Start:
+# Required-Stop:
+# Default-Start: 1 2 3 5
+# Default-Stop: 0 6
+# Short-Description: manage user-space device nodes in /udev
+# Description: Start udev to create the device files for all
+# devices already present in system when script is
+# called. All other devices files will be automatically
+# created when udev is called via /sbin/hotplug.
+# Requires at least a kernel 2.6 to work properly.
+### END INIT INFO
+#
+# Note on script names:
+# http://www.linuxbase.org/spec/refspecs/LSB_1.2.0/gLSB/scrptnames.html
+# A registry has been set up to manage the init script namespace.
+# http://www.lanana.org/
+# Please use the names already registered or register one or use a
+# vendor prefix.
+
+
+# Check for missing binaries (stale symlinks should not happen)
+UDEV_BIN=/sbin/udev
+test -x $UDEV_BIN || exit 5
+
+# Check for existence of needed config file and read it
+UDEV_CONFIG=/etc/udev/udev.conf
+test -r $UDEV_CONFIG || exit 6
+. $UDEV_CONFIG
+
+# Directory where sysfs is mounted
+SYSFS_DIR=/sys
+
+# Source LSB init functions
+. /lib/lsb/init-functions
+
+run_udev () {
+ # handle block devices and their partitions
+ for i in ${SYSFS_DIR}/block/*; do
+ # add each drive
+ export DEVPATH=${i#${SYSFS_DIR}}
+ $UDEV_BIN block &
+
+ # add each partition, on each device
+ for j in $i/*; do
+ if [ -f $j/dev ]; then
+ export DEVPATH=${j#${SYSFS_DIR}}
+ $UDEV_BIN block &
+ fi
+ done
+ done
+ # all other device classes
+ for i in ${SYSFS_DIR}/class/*; do
+ for j in $i/*; do
+ if [ -f $j/dev ]; then
+ export DEVPATH=${j#${SYSFS_DIR}}
+ CLASS=`echo ${i#${SYSFS_DIR}} | \
+ cut --delimiter='/' --fields=3-`
+ $UDEV_BIN $CLASS &
+ fi
+ done
+ done
+}
+
+case "$1" in
+ start)
+ if [ ! -d $SYSFS_DIR ]; then
+ log_failure_msg "${0}: SYSFS_DIR \"$SYSFS_DIR\" not found"
+ exit 1
+ fi
+ if [ ! -d $udev_root ]; then
+ mkdir $udev_root || exit 4
+ fi
+ # propogate /udev from /sys - we only need this while we do not
+ # have initramfs and an early user-space with which to do early
+ # device bring up
+ echo -n "Creating initial udev device nodes: "
+ export ACTION=add
+ run_udev
+ log_success_msg
+ ;;
+ stop)
+ # be careful
+ echo -n "Removing udev device nodes: "
+ export ACTION=remove
+ run_udev
+ rm -f $udev_db || exit 1
+ rmdir $udev_root || exit 1
+ log_success_msg
+ ;;
+ restart)
+ $0 stop
+ $0 start
+
+ exit $?
+ ;;
+ force-reload)
+ echo -n "Reload udev "
+ $0 stop && $0 start
+ exit $?
+ ;;
+ reload)
+ exit 3
+ ;;
+ status)
+ echo -n "Checking for udev root directory: "
+ if [ -d $udev_root ]; then
+ log_success_msg found
+ else
+ log_warning_msg "not found"
+ exit 3
+ fi
+ ;;
+ *)
+ echo "Usage: $0 {start|stop|status|restart|force-reload|reload}"
+ exit 1
+ ;;
+esac
if [ -z "$3" ]; then
MEDIA=`cat /proc/ide/${1}/media`
if [ "${MEDIA}" = "cdrom" ]; then
- echo ${1} ide/host${HOST}/bus${BUS}/target${TARGET}/lun0/cd cdroms/cdrom`get_dev_number $1 cdrom`
+ echo $1 ide/host${HOST}/bus${BUS}/target${TARGET}/lun0/cd cdroms/cdrom`get_dev_number $1 cdrom`
elif [ "${MEDIA}" = "disk" ]; then
echo $1 ide/host${HOST}/bus${BUS}/target${TARGET}/lun0/disc discs/disc`get_dev_number $1 disk`/disc
fi
# 1 - debugging enabled
%define debug 0
+# if we want to use the LSB version of the init script or the Redhat one
+# 0 - use Redhat version: etc/init.d/udev
+# 1 - use LSB version: etc/init.d/udev.init.LSB
+%define lsb 0
+
Summary: A userspace implementation of devfs
Name: udev
Version: 012_bk
%if %{dbus}
USE_DBUS=true
%endif
+%if %{lsb}
+ USE_LSB=true
+%endif
%post
/sbin/chkconfig --add udev
%attr(0644,root,root) %{_mandir}/man8/udev.8*
%changelog
+* Mon Jan 05 2004 Rolf Eike Beer <eike-hotplug@sf-tec.de>
+- add defines to choose the init script (Redhat or LSB)
+
* Tue Dec 16 2003 Robert Love <rml@ximian.com>
- install the initscript and run chkconfig on it
* Mon Jul 28 2003 Paul Mundt <lethal@linux-sh.org>
- Initial spec file for udev-0.2.
-