X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=trackpump-mutlihead-clip.scad;h=cebf159963563f79bfd2efc122655f3c22691b6d;hb=e35b790aebe2260ac2319ba5b747797ae7115305;hp=0b8bd01ef36d49e26a66baeade05f19ef01b89d7;hpb=c1ecd098588c9bdd2b8e3f200c8cb0b41b16bc54;p=reprap-play.git

diff --git a/trackpump-mutlihead-clip.scad b/trackpump-mutlihead-clip.scad
index 0b8bd01..cebf159 100644
--- a/trackpump-mutlihead-clip.scad
+++ b/trackpump-mutlihead-clip.scad
@@ -1,5 +1,7 @@
 // -*- C -*-
 
+include <commitid.scad>
+
 pump_main_dia = 38;
 pump_side_width = 5;
 pump_side_thick = 4;
@@ -31,18 +33,19 @@ baseplate_width_rad =
 
 xm = baseplate + pump_main_dia/2;
 
+pump_side_total_height =
+  pump_side_thick + pump_side_height + pump_protr_slheight + pump_protr_flat;
+
 $fa=5;
 
 module PumpSidePlan() {
   or = pump_side_outer_rad;
-  br = baseplate_width_rad;
   difference(){
     union(){
       intersection(){
 	translate([-xm, 0]) circle(r=or);
-	translate([-(xm+or), -or]) square([xm+or, or*2]);
+//	translate([-(xm+or), -or]) square([xm+or, or*2]);
       }
-      translate([-xm, -br]) square([xm, br*2]);
     }
     translate([-xm-or, 0])
       square(center=true, [pump_side_width*4, pump_shaft_dia]);
@@ -55,6 +58,7 @@ module PumpSideElevation(){
   x1 = x2 - pump_main_dia;
   x0 = x1 - pump_side_width;
   x2a = x2 - pump_protr_protr;
+  x4 = x2 + pump_side_width;
 
   z0 = 0;
   z1 = z0 - pump_side_thick;
@@ -72,28 +76,53 @@ module PumpSideElevation(){
     translate([x1,z2]) scale([1,arcy/arcx]) circle(r=arcx);
   }
 
-  translate([x2,z2a]) square([x3-x2, z0-z2a]);
+  translate([x2,z2a]) square([x4-x2, z0-z2a]);
 
   hull(){
-    translate([x2,z2a]) square([x3-x2, z2-z2a]);
+    translate([x2,z2a]) square([x4-x2, z2-z2a]);
     translate([x2a,z2b]) square([x3-x2a, z2a-z2b]);
   }
 }
 
 module PumpSide(){
+  br = baseplate_width_rad;
+  brs = hose_side_stalk_width/2;
+  echo(brs);
+
   difference(){
     intersection(){
       translate([0,100,0])
 	rotate([90,0,0])
 	linear_extrude(height=200)
-      PumpSideElevation();
-      translate([0,0,-100])
-	linear_extrude(height=200)
-	PumpSidePlan();
+	PumpSideElevation();
+      union(){
+	translate([0,0,-100])
+	  linear_extrude(height=200)
+	  PumpSidePlan();
+	// baseplate
+	hull(){
+	  mirror([0,0,1])
+	    translate([-xm, -brs, 0])
+	    cube([pump_main_dia/2 + pump_side_width,
+		  brs*2,
+		  1]);
+	  translate([-xm, -br, -pump_side_total_height])
+	    cube([xm,
+		  br*2,
+		  pump_protr_flat]);
+	}
+      }
     }
     translate([-(baseplate + pump_main_dia/2), 0,
 		-(pump_side_thick + pump_side_height)])
       cylinder(r=pump_main_dia/2, h=200);
+    rotate([0,0,180])
+      mirror([0,0,1])
+      translate([-0,
+		 -br,
+		 pump_side_total_height])
+      Commitid_BestCount_M([baseplate + pump_protr_protr,
+			    br*2]);
   }
 }
 
@@ -138,6 +167,7 @@ module ClipPrint(){
 }
 
 //PumpSidePlan();
+//PumpSideElevation();
 //PumpSide();
 //HoseSide();
 //Clip();