X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=test%2FTEST-01-BASIC%2Ftest.sh;h=aaf63f4f529e7e8c175014f5a9606e0967987103;hb=ad83b4c47cb5b48cfd0a14537cee0c830eec2b74;hp=eb6a80a07c8e1737548101041894093af4c83e63;hpb=71dc3ed1d95dfe246004018c2ca85156fc73c146;p=elogind.git

diff --git a/test/TEST-01-BASIC/test.sh b/test/TEST-01-BASIC/test.sh
index eb6a80a07..aaf63f4f5 100755
--- a/test/TEST-01-BASIC/test.sh
+++ b/test/TEST-01-BASIC/test.sh
@@ -3,56 +3,35 @@
 # ex: ts=8 sw=4 sts=4 et filetype=sh
 TEST_DESCRIPTION="Basic systemd setup"
 
-KVERSION=${KVERSION-$(uname -r)}
-KERNEL_VER=$(uname -r)
+. $TEST_BASE_DIR/test-functions
 
 # Uncomment this to debug failures
 #DEBUGFAIL="systemd.unit=multi-user.target"
-DEBUGTOOLS="df free ls stty cat ps ln ip route dmesg dhclient mkdir cp ping dhclient strace less grep id tty touch du sort"
-
-run_qemu() {
-    # TODO: qemu wrapper script: http://www.spinics.net/lists/kvm/msg72389.html
-    qemu-kvm \
-        -hda $TESTDIR/rootdisk.img \
-        -m 512M -nographic \
-        -net none -kernel /boot/vmlinuz-$KERNEL_VER \
-        -append "root=/dev/sda1 systemd.log_level=debug raid=noautodetect loglevel=2 init=/usr/lib/systemd/systemd ro console=ttyS0,115200n81 selinux=0 $DEBUGFAIL" || return 1
 
+check_result_qemu() {
     ret=1
     mkdir -p $TESTDIR/root
     mount ${LOOPDEV}p1 $TESTDIR/root
     [[ -e $TESTDIR/root/testok ]] && ret=0
-    cp -a $TESTDIR/root/failed $TESTDIR
-    cp -a $TESTDIR/root/var/log/journal $TESTDIR
+    [[ -f $TESTDIR/root/failed ]] && cp -a $TESTDIR/root/failed $TESTDIR
+    [[ -f $TESTDIR/root/var/log/journal ]] && cp -a $TESTDIR/root/var/log/journal $TESTDIR
     umount $TESTDIR/root
-    cat $TESTDIR/failed
-    ls -l $TESTDIR/journal/*/*.journal
-    test -s $TESTDIR/failed && ret=$(($ret+1))
-    return $ret
-}
-
-
-run_nspawn() {
-    systemd-nspawn -b -D $TESTDIR/nspawn-root --capability=CAP_AUDIT_CONTROL,CAP_AUDIT_WRITE /usr/lib/systemd/systemd
-    ret=1
-    [[ -e $TESTDIR/nspawn-root/testok ]] && ret=0
-    cp -a $TESTDIR/nspawn-root/failed $TESTDIR
-    cp -a $TESTDIR/nspawn-root/var/log/journal $TESTDIR
-    cat $TESTDIR/failed
+    [[ -f $TESTDIR/failed ]] && cat $TESTDIR/failed
     ls -l $TESTDIR/journal/*/*.journal
     test -s $TESTDIR/failed && ret=$(($ret+1))
     return $ret
 }
 
-
 test_run() {
     if check_qemu ; then
-        run_qemu || return 1
+        run_qemu
+        check_result_qemu || return 1
     else
         dwarn "can't run qemu-kvm, skipping"
     fi
     if check_nspawn; then
-        run_nspawn || return 1
+        run_nspawn
+        check_result_nspawn || return 1
     else
         dwarn "can't run systemd-nspawn, skipping"
     fi
@@ -60,78 +39,16 @@ test_run() {
 }
 
 test_setup() {
-    rm -f $TESTDIR/rootdisk.img
-    # Create the blank file to use as a root filesystem
-    dd if=/dev/null of=$TESTDIR/rootdisk.img bs=1M seek=200
-    LOOPDEV=$(losetup --show -P -f $TESTDIR/rootdisk.img)
-    [ -b $LOOPDEV ] || return 1
-    echo "LOOPDEV=$LOOPDEV" >> $STATEFILE
-    sfdisk -C 6400 -H 2 -S 32 -L $LOOPDEV <<EOF
-,3200
-,
-EOF
-
-    mkfs.ext3 -L systemd ${LOOPDEV}p1
-    echo -n test >$TESTDIR/keyfile
+    create_empty_image
     mkdir -p $TESTDIR/root
     mount ${LOOPDEV}p1 $TESTDIR/root
-    mkdir -p $TESTDIR/root/run
 
     # Create what will eventually be our root filesystem onto an overlay
     (
         LOG_LEVEL=5
-        initdir=$TESTDIR/root
-
-        # create the basic filesystem layout
-        setup_basic_dirs
-
-        # install compiled files
-        (cd ../..; make DESTDIR=$initdir install)
-
-        # remove unneeded documentation
-        rm -fr $initdir/usr/share/{man,doc,gtk-doc}
-
-        # install possible missing libraries
-        for i in $initdir/{sbin,bin}/* $initdir/lib/systemd/*; do
-            inst_libs $i
-        done
-
-        # make a journal directory
-        mkdir -p $initdir/var/log/journal
-
-        # install some basic config files
-        inst /etc/sysconfig/init
-        inst /etc/passwd
-        inst /etc/shadow
-        inst /etc/group
-        inst /etc/shells
-        inst /etc/nsswitch.conf
-        inst /etc/pam.conf
-        inst /etc/securetty
-        inst /etc/os-release
-        inst /etc/localtime
-        # we want an empty environment
-        > $initdir/etc/environment
-        > $initdir/etc/machine-id
-
-        # set the hostname
-        echo  systemd-testsuite > $initdir/etc/hostname
-
         eval $(udevadm info --export --query=env --name=${LOOPDEV}p2)
 
-        cat >$initdir/etc/fstab <<EOF
-LABEL=systemd           /       ext3    rw 0 1
-EOF
-
-        # setup the testsuite target
-        cat >$initdir/etc/systemd/system/testsuite.target <<EOF
-[Unit]
-Description=Testsuite target
-Requires=multi-user.target
-After=multi-user.target
-Conflicts=rescue.target
-AllowIsolate=yes
-EOF
+        setup_basic_environment
 
         # setup the testsuite service
         cat >$initdir/etc/systemd/system/testsuite.service <<EOF
@@ -140,103 +57,13 @@ Description=Testsuite service
 After=multi-user.target
 
 [Service]
-ExecStart=/bin/bash -c 'set -x; systemctl --failed --no-legend --no-pager > /failed ; echo OK > /testok; while : ;do echo "testsuite service waiting for journal to move to /var/log/journal" > /dev/console ; for i in /var/log/journal/*;do [ -d "\$i" ] && echo "\$i" && break 2; done; sleep 1; done; sleep 1; exit 0;'
-ExecStopPost=/usr/bin/systemctl poweroff
+ExecStart=/bin/bash -c 'set -x; ( systemctl --failed --no-legend --no-pager; systemctl status --failed ) > /failed ; echo OK > /testok; while : ;do echo "testsuite service waiting for journal to move to /var/log/journal" > /dev/console ; for i in /var/log/journal/*;do [ -d "\$i" ] && echo "\$i" && break 2; done; sleep 1; done; sleep 1; exit 0;'
 Type=oneshot
 EOF
-        mkdir -p $initdir/etc/systemd/system/testsuite.target.wants
-        ln -fs ../testsuite.service $initdir/etc/systemd/system/testsuite.target.wants/testsuite.service
-
-        # make the testsuite the default target
-        ln -fs testsuite.target $initdir/etc/systemd/system/default.target
-        mkdir -p $initdir/etc/rc.d
-        cat >$initdir/etc/rc.d/rc.local <<EOF
-#!/bin/bash
-exit 0
-EOF
-        chmod 0755 $initdir/etc/rc.d/rc.local
-        # install basic tools needed
-        dracut_install sh bash setsid loadkeys setfont \
-            login sushell sulogin gzip sleep echo mount umount cryptsetup
-        dracut_install dmsetup modprobe
-
-        # install libnss_files for login
-        inst_libdir_file "libnss_files*"
-
-        # install dbus and pam
-        find \
-            /etc/dbus-1 \
-            /etc/pam.d \
-            /etc/security \
-            /lib64/security \
-            /lib/security -xtype f \
-            | while read file; do
-            inst $file
-        done
 
-        # install dbus socket and service file
-        inst /usr/lib/systemd/system/dbus.socket
-        inst /usr/lib/systemd/system/dbus.service
-
-        # install basic keyboard maps and fonts
-        for i in \
-            /usr/lib/kbd/consolefonts/latarcyrheb-sun16* \
-            /usr/lib/kbd/keymaps/include/* \
-            /usr/lib/kbd/keymaps/i386/include/* \
-            /usr/lib/kbd/keymaps/i386/qwerty/us.*; do
-                [[ -f $i ]] || continue
-                inst $i
-        done
-
-        # some basic terminfo files
-        for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
-            [ -f ${_terminfodir}/l/linux ] && break
-        done
-        dracut_install -o ${_terminfodir}/l/linux
-
-        # softlink mtab
-        ln -fs /proc/self/mounts $initdir/etc/mtab
-
-        # install any Exec's from the service files
-        egrep -ho '^Exec[^ ]*=[^ ]+' $initdir/lib/systemd/system/*.service \
-            | while read i; do
-            i=${i##Exec*=}; i=${i##-}
-            inst $i
-        done
-
-        # install plymouth, if found... else remove plymouth service files
-        # if [ -x /usr/libexec/plymouth/plymouth-populate-initrd ]; then
-        #     PLYMOUTH_POPULATE_SOURCE_FUNCTIONS="$TEST_BASE_DIR/test-functions" \
-        #         /usr/libexec/plymouth/plymouth-populate-initrd -t $initdir
-        #         dracut_install plymouth plymouthd
-        # else
-        rm -f $initdir/{usr/lib,etc}/systemd/system/plymouth* $initdir/{usr/lib,etc}/systemd/system/*/plymouth*
-        # fi
-
-        # some helper tools for debugging
-        [[ $DEBUGTOOLS ]] && dracut_install $DEBUGTOOLS
-
-        # install ld.so.conf* and run ldconfig
-        cp -a /etc/ld.so.conf* $initdir/etc
-        ldconfig -r "$initdir"
-        ddebug "Strip binaeries"
-        find "$initdir" -perm +111 -type f | xargs strip --strip-unneeded | ddebug
-
-        # copy depmod files
-        inst /lib/modules/$KERNEL_VER/modules.order
-        inst /lib/modules/$KERNEL_VER/modules.builtin
-        # generate module dependencies
-        if [[ -d $initdir/lib/modules/$KERNEL_VER ]] && \
-            ! depmod -a -b "$initdir" $KERNEL_VER; then
-                dfatal "\"depmod -a $KERNEL_VER\" failed."
-                exit 1
-        fi
+        setup_testsuite
     )
-    rm -fr $TESTDIR/nspawn-root
-    ddebug "cp -ar $TESTDIR/root $TESTDIR/nspawn-root"
-    cp -ar $TESTDIR/root $TESTDIR/nspawn-root
-    # we don't mount in the nspawn root
-    rm -fr $TESTDIR/nspawn-root/etc/fstab
+    setup_nspawn_root
 
     ddebug "umount $TESTDIR/root"
     umount $TESTDIR/root
@@ -248,5 +75,4 @@ test_cleanup() {
     return 0
 }
 
-. $TEST_BASE_DIR/test-functions
 do_test "$@"