X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=slic3r-config.ini;h=723db42252299f02fbc1d964218f2ded625be362;hb=d129de758df29b6c209bdfb33d61f62a0499c620;hp=e486180d126901237e099703fb889e058564086c;hpb=71fd4eae4e6fde9c188dcda481e2d146d645e455;p=reprap-play.git

diff --git a/slic3r-config.ini b/slic3r-config.ini
index e486180..723db42 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,7 +1,7 @@
-# generated by Slic3r 0.9.1 on Sun Oct 14 22:11:17 2012
+# generated by Slic3r 0.9.1 on Thu Nov 29 00:42:51 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 80
+bed_temperature = 110
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 0.9
+extrusion_multiplier = 1.0
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 70
+first_layer_bed_temperature = 100
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 210
+temperature = 215
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130