X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=slic3r-config.ini;h=5f30c0e46083cde5df3031602de18ab677bdb739;hb=6a8e7931724798e9f05528c585e514c844716599;hp=541e48a0644e133e59bb7f503eb56632e9247bc1;hpb=992fecc653fbce678e8d73cd2b2f13fa1d2c9f9d;p=reprap-play.git

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 541e48a..5f30c0e 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 0.9.1 on Sat Aug 11 00:01:02 2012
+# generated by Slic3r 0.9.1 on Sun Aug 12 22:17:48 2012
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 60
@@ -31,7 +31,7 @@ first_layer_bed_temperature = 65
 first_layer_extrusion_width = 150%
 first_layer_height = 0.4
 first_layer_speed = 30%
-first_layer_temperature = 195
+first_layer_temperature = 215
 g0 = 0
 gcode_arcs = 0
 gcode_comments = 0
@@ -53,7 +53,7 @@ perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 100%
 perimeter_speed = 30
-perimeters = 3
+perimeters = 1
 post_process = 
 print_center = 70,70
 randomize_start = 1
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 190
+temperature = 210
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130