X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=slic3r-config.ini;h=2c38ddda2a34870a83de2fd830f1f2d42bc1af69;hb=8622f62da0556fe4042b37ec9d9f94f28a03053c;hp=b98386cd2645a6d07f72f46c69f912113baf282f;hpb=62e3379f634f89115fa150d365b9c7aa0f258004;p=reprap-play.git

diff --git a/slic3r-config.ini b/slic3r-config.ini
index b98386c..2c38ddd 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,8 +1,8 @@
-# generated by Slic3r 0.9.7 on Mon Mar 10 17:22:59 2014
+# generated by Slic3r 0.9.7 on Sun May  4 00:21:18 2014
 acceleration = 0
 bed_size = 140,140
 bed_temperature = 100
-bottom_solid_layers = 3
+bottom_solid_layers = 2
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
@@ -25,7 +25,7 @@ extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.77
-fill_angle = 45
+fill_angle = 0
 fill_density = 0.2
 fill_pattern = rectilinear
 first_layer_bed_temperature = 100
@@ -51,7 +51,7 @@ min_print_speed = 10
 min_skirt_length = 0
 notes = 
 nozzle_diameter = 0.50
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
@@ -91,7 +91,7 @@ support_material_threshold = 45
 temperature = 205
 threads = 8
 top_solid_infill_speed = 50
-top_solid_layers = 3
+top_solid_layers = 2
 travel_speed = 130
 use_relative_e_distances = 0
 vibration_limit = 0