X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=sleepphone-cable-box.scad;h=5ddbaa987409c6cda480dce59c1f4074db3c75cd;hb=a53501de1b8f2d120532d2c749405980d0604c10;hp=54645e037e2f66011b7ba5330f0fd756be42a930;hpb=ee7f1f75a1216e904d0216e4372a04d78bd4c732;p=reprap-play.git

diff --git a/sleepphone-cable-box.scad b/sleepphone-cable-box.scad
index 54645e0..5ddbaa9 100644
--- a/sleepphone-cable-box.scad
+++ b/sleepphone-cable-box.scad
@@ -28,16 +28,16 @@ led_dia = 4.4;
 plug_maxw = 10.95 + 0.35;
 plug_minw=   6.53 + 0.35;
 plug_sllen=  6.50;
-plug_totlen = 84.90 - 1.5; // to maxw, including phone
+plug_totlen = 84.90 + 1.5; // to maxw, including phone
 
 plug_h = 6.5;
 plug_tooth_h = 0.5;
 plug_tooth_dy = 0.5;
 
 keeper_prong = 2;
-keeper_stalk_basewidth = 4;
+keeper_stalk_basewidth = 6;
 keeper_stalk_len = 70;
-keeper_stalk_gap = 2;
+keeper_stalk_gap = 1;
 keeper_stalk_thick = wall_bot;
 
 // calculated
@@ -132,20 +132,13 @@ module PlugKeeper(){
     }
 }
 
-module KeeperProjection(){
-  projection()
-    rotate([0,90,0])
-    linear_extrude(height= 20)
-    projection()
-    PlugKeeper();
-}
-
 module Box(){
   difference(){
     BoxMain();
 
     translate([ led[0], phone[1]/2 - led[1], 1 ])
-      cylinder(r = led_dia/2, h= phone[2]*2, $fn=20);
+      rotate([0,0, 360/8/2])
+      cylinder(r = led_dia/2 / cos(360/8/2), h= phone[2]*2, $fn=8);
 
     for (ys=[-1,+1]) {
       translate([ -0.1, ys * keeper_stalk_gap, -wall[2]*2])
@@ -166,8 +159,14 @@ module Box(){
     PlugKeeperStalkProfile();
 }
 
+module BoxPrint(){
+  // This makes' Cura's support more optimal: specifically,
+  // it then doesn't seem to touch the back (bottom) wall
+  rotate([0,90,0])
+    Box();
+}
+
 //MainProfileInnerHalf();
 //MainProfile();
-//KeeperProjection();
-Box();
-
+//Box();
+BoxPrint();