X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=sewing-table.scad.m4;h=cf85e359aeed4abefafb083420ed6e67df62beb3;hb=f2fb790ad5c32a61ac03d612dd1813d135fd3105;hp=76fda5d8ba6a00ca3ebe1c7b9a661e925ff6c091;hpb=64329221666a405143dd4899da9c843ef3d43d2b;p=reprap-play.git diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4 index 76fda5d..cf85e35 100644 --- a/sewing-table.scad.m4 +++ b/sewing-table.scad.m4 @@ -205,6 +205,19 @@ module TileBase(botleft, topright){ } } +m4_dnl R_EDGE(c,ix) +m4_dnl c is from Rectangle_corners and +m4_dnl ix is a corner number +m4_dnl expands to two comma-separated corners: +m4_dnl that denoted by ix, and the next one anticlockwise +m4_define(`R_EDGE',`$1[$2], $1[(($2)+1)%4]') + +m4_dnl R_CNR(c,ix) +m4_dnl c is from Rectangle_corners and +m4_dnl ix is a corner number +m4_dnl expands to an array of corners as for RoundCorner +m4_define(`R_CNR',`[ $1[$2], $1[(($2)+1)%4], $1[(($2)+3)%4] ]') + m4_dnl INREFFRAME(left_cnr, right_cnr, morevars) { body; } m4_define(`INREFFRAME',` length_vec = ($2) - ($1); @@ -254,12 +267,6 @@ m4_define(`ROUNDCORNER_VARS',` module RoundCorner_selector(ci, adj) { ROUNDCORNER_VARS; - echo("RCS",l_uvec,ctr); - %union(){ - INREFFRAME(this_cnr, right_cnr) { - cube(bigr*2 + adj, center=true); - } - } intersection(){ union(){ INREFFRAME(ctr3,concat(lp1,[4])){ @@ -393,7 +400,7 @@ module TestPiece1(){ ////toplevel [ 0, 0] ]; corners = TestPiece_holes2corners(holes); - rcs = [corners[0], corners[1]]; + rcs = R_CNR(corners,0); difference(){ union(){ TileBase(corners[0], corners[2]); @@ -482,6 +489,21 @@ module Machine_NewRearProfile(){ } } +module Machine_NewFrontProfile(){ + // figures copied out of xfig edit boxes + // best not to edit the posbox size if poss - just move it + posbox = 10 * ([11.8022,8.0600] - [4.2044,19.1867]); // box, Green + refline = 10 * ([7.6778,16.7222] - [27.8689,17.6578]); // line, Blue + refline_mm = (11-1)*10; + sh = -[abs(posbox[0]), abs(posbox[1])]; + rot = atan2(-refline[0], refline[1]); + sc = refline_mm / vectorlen2d(refline); + //echo("SH",sh,rot,sc); + mirror([1,0]) scale(sc) rotate(rot+90) translate(sh){ + import("sewing-table-front-profile.dxf", convexity=10); // spline, Pink3 + } +} + module Machine_NewRearCurve(){ slant = atan2(4,210-10); //echo("SL",slant); @@ -547,18 +569,15 @@ module Machine_Curves(){ ////toplevel translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len, cutout_tile11_y, frontcurve_z_slop ]){ - translate([ 0, -first_front[0] , 0 ]) + translate([0, -machine_rear_to_front, 0]) multmatrix([[1, -frontcurve_side_skew, 0, 0], [0, 1, 0, 0], [0, 0, 1, 0], [0, 0, 0, 1]]) - translate([ 0, first_front[0] , 0 ]) - mirror([1,0,0]){ - rotate([0,-90,0])rotate([0,0,-90]){ - linear_extrude(height= 200) - Machine_FrontProfile(); - } - } + mirror([1,0,0]) rotate([0,-90,0])rotate([0,0,-90]) + linear_extrude(height= 200) + Machine_NewFrontProfile(); + translate([ rearcurve_strt_len, 0, rearcurve_z_slop ]){ @@ -603,48 +622,12 @@ module Rectangle_TileBase(c) { TileBase(c[0], c[2]); } function Posts_interpolate_one(c0,c1) = [c0, (c0+c1)/2, c1]; -m4_dnl R_EDGE(c,ix) -m4_dnl c is from Rectangle_corners and -m4_dnl ix is a corner number -m4_dnl expands to two comma-separated corners: -m4_dnl that denoted by ix, and the next one anticlockwise -m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]') - -module FitTest_general(c0,sz, dobrace=false){ - c = Rectangle_corners(c0, sz); - brace = [7,7,9]; - difference(){ - union(){ - Rectangle_TileBase(c); - if (dobrace) { - translate(concat(c0, [-brace[2] + 0.1])){ - difference(){ - cube(concat(sz,[brace[2]]) - [5,0,0]); - translate(brace + [0,0, -25]) - cube(concat(sz, [50]) - brace*2 + [10,0,0]); - } - } - } - RoundEdge(R_EDGE(c,1)); - } - Machine(); - } -} - -module FitTest_Entire(){ ////toplevel - FitTest_general([-40,-80], [275,180], dobrace=true); -} - -module FitTest_RearCurve(){ ////toplevel - FitTest_general([110,0], [170,100]); -} - module Tile02(){ ////toplevel sz = [100,170]; c0 = tile02_tr + -sz; c = Rectangle_corners(c0, sz); posts = Rectangle_corners2posts(c); - rcs = [R_EDGE(c,0)]; + rcs = R_CNR(c,0); difference(){ union(){ Rectangle_TileBase(c); @@ -664,7 +647,7 @@ module Tile12(){ ////toplevel c0 = tile02_tr + [-sz[0], 0]; c = Rectangle_corners(c0, sz); posts = Rectangle_corners2posts(c); - rcs = [R_EDGE(c,3)]; + rcs = R_CNR(c,3); difference(){ union(){ Rectangle_TileBase(c); @@ -744,7 +727,7 @@ module Tile10(){ ////toplevel cnr_posts[1] + [ 0, rcy ], cnr_posts[2], cnr_posts[3] ]; - rcs = [R_EDGE(c,2)]; + rcs = R_CNR(c,2); difference(){ union(){ Rectangle_TileBase(c); @@ -779,7 +762,8 @@ module Tile00(){ ////toplevel cnr_posts[2] + [ -sz[0] + rearedge_len - cutout_l_end_x, -cty ], cnr_posts[3] + [ 0, -cty ] ]; - rcs = [R_EDGE(c,1)]; + rcs = R_CNR(c,1); + rc2 = [c1bis,c2bis,c[1]]; difference(){ union(){ difference(){ @@ -798,9 +782,39 @@ module Tile00(){ ////toplevel RoundEdge(c1bis, c2bis); } Machine(); + RoundCornerCut(rc2); } RoundCornerAdd(rcs); - RoundCornerAdd([c1bis,c2bis,c[1]]); + RoundCornerAdd(rc2); +} + +module FitTest_general(c0,sz, dobrace=false){ + c = Rectangle_corners(c0, sz); + brace = [7,7,9]; + difference(){ + union(){ + Rectangle_TileBase(c); + if (dobrace) { + translate(concat(c0, [-brace[2] + 0.1])){ + difference(){ + cube(concat(sz,[brace[2]]) - [5,0,0]); + translate(brace + [0,0, -25]) + cube(concat(sz, [50]) - brace*2 + [10,0,0]); + } + } + } + RoundEdge(R_EDGE(c,1)); + } + Machine(); + } +} + +module FitTest_Entire(){ ////toplevel + FitTest_general([-40,-80], [275,180], dobrace=true); +} + +module FitTest_RearCurve(){ ////toplevel + FitTest_general([110,0], [170,100]); } module FitTest_FrontCurve(){ ////toplevel @@ -814,12 +828,43 @@ module FitTest_FrontCurve(){ ////toplevel } } +module FitTest_PairLink(adjust=0){ ////toplevel + cy0=-55; cy1=85; cx=130; + bar = [10,10]; + legrad = 15; + footrad_min = 4; footrad_max = 6; footrad_depth = 3; + + translate([cx - bar[0]/2, cy0, 0]) + cube([bar[0], cy1-cy0, bar[1]]); + for (endy=[cy0,cy1]) { + translate([cx,endy,0]){ + for (rot=[0:90:270]) { + rotate(rot){ + translate([legrad,0,0]){ + hull(){ + cylinder(r= footrad_max, height=1); + translate([0,0,-footrad_depth]) + cylinder(r= footrad_min, height=1); + } + } + } + } + } + } +} + +module FitTest_PairDemo(){ ////toplevel + %FitTest_FrontCurve(); + %FitTest_RearCurve(); + FitTest_PairLink(); +} + module RoundCornerDemo_plat(cnr){ mirror([0,0,1]) linear_extrude(height=1) polygon(cnr); } module RoundCornerDemo(){ ////toplevel - cnr = [ [0,0], [15,0], [-10,12] ]; + cnr = [ [-2,-3], [13,-3], [-12,9] ]; translate([0,25,0]) RoundCornerDemo_plat(cnr); translate([25,0,0]) RoundCornerAdd(cnr); translate([-25,0,0]) RoundCornerCut(cnr); @@ -848,6 +893,7 @@ module Demo(){ ////toplevel //Machine_Profile(); //Machine_NewRearProfile(); //Machine_NewRearCurve(); +//Machine_NewFrontProfile(); //Machine_Curves(); //Machine(); //FitTest();