X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=sewing-table.scad.m4;h=9c75224459c5399d26c5cee8538c0bb189245737;hb=1c85c80f3976cd74fa32545076a7a380f64d024a;hp=e4ead979bb95194198eacc7947d3b642f7aa5d00;hpb=e109b07a4141973b8174b897f27957afa0cb9a1f;p=reprap-play.git diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4 index e4ead97..9c75224 100644 --- a/sewing-table.scad.m4 +++ b/sewing-table.scad.m4 @@ -94,10 +94,11 @@ rearcurve_double_inrad = 26.10 + 8.04; reartablet_z = 2.54; reartablet_x = 5 + 1; -reartablet_y = 5; +reartablet_y = 8; frontcurve_side_skew = 3.5 / 72; frontcurve_avoid_y = 70; +frontcurve_z_slop = 0.75; // calculated @@ -122,6 +123,8 @@ thehd_tl = [ -thehd_tr[0], thehd_tr[1] ]; thehd_bl = -thehd_tr; thehd_br = -thehd_tl; +tablet_z_slop = rearcurve_z_slop; + interlock_rad = interlock_dia/2; interlock_negative_rad = interlock_rad + 0.125; @@ -129,6 +132,9 @@ interlock_sq_adj = 0.2; // arbitrary first_front = machine_front_profile[len(machine_front_profile)-1]; +m4_define(`POST_TCROSSSZ', + `2*( tile_hard_edge_hole_dist - test_edge + 1 )') + module Post(){ mirror([0,0,1]) { difference(){ @@ -139,10 +145,9 @@ module Post(){ } } if (TEST) { - tsz = tile_hard_edge_hole_dist - test_edge + 1; translate([0,0, tile_th/2]) { - cube([post_dia, tsz*2, tile_th], center=true); - cube([tsz*2, post_dia, tile_th], center=true); + cube([post_dia, POST_TCROSSSZ, tile_th], center=true); + cube([POST_TCROSSSZ, post_dia, tile_th], center=true); } } } @@ -164,15 +169,22 @@ module TileBase(botleft, topright){ translate(concat(botleft, [0])) cube(concat(size, [tile_th])); if (!TEST) { + cidsz = topright_post-botleft_post + + [-post_dia,-post_dia] + + [0, thehd[1]]; + cidszr = [ min(cidsz[0],50), min(cidsz[1],50) ]; + echo("CID",cidsz,cidszr); translate( concat(botleft_post, [ -tile_th ]) - + 0.5 * [ post_dia, post_dia, 0 ] ) - Commitid_BestCount_M( topright_post-botleft_post - + [-post_dia,-post_dia] - + [0, thehd[1]]); + + 0.5 * [ post_dia, post_dia, 0 ] + + 0.5 * concat( cidsz - cidszr, [ 0 ]) ) + Commitid_BestCount_M(cidszr); } if (TEST) { - translate( concat(botleft + [thehd[0], 0], [0]) ) - Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]); + crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2; + cidsz = [ thehd[0], size[1] - 2*crossoff ]; + cidszr = [ cidsz[0], min(cidsz[1], 50) ]; + translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) ) + Commitid_BestCount(cidszr); difference(){ mirror([0,0,1]) { translate(concat(botleft + [test_edge,test_edge], [test_tile_th])) @@ -381,7 +393,7 @@ module Machine_Arm(){ translate([0,0,-30]) linear_extrude(height=60) { translate(tile01_tr + [0, (-cutout_tile01_y + cutout_tile11_y)/2]) { intersection(){ - translate([-100, -ysz/2]) + translate([-50, -ysz/2]) square([400, ysz]); translate([ endrad - cutout_tile11_x - cutout_l_end_x_slop, 0 ]) circle(r=endrad, $fa=0.01,$fd=5); @@ -412,7 +424,54 @@ module Machine_Profile(){ } } -module Machine_RearProfile(){ +module Machine_NewRearProfile(){ + // figures copied out of xfig edit boxes + // best not to edit the posbox size if poss - just move it + posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green + sideline = -10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue + scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2 + scaleline_mm = 12+5+10+5+3; + sh = -[abs(posbox[0]), abs(posbox[1])]; + rot = atan2(-sideline[0], sideline[1]); + sc = scaleline_mm / scaleline; + echo("SH",sh,rot,sc); + scale(sc) rotate(rot) translate(sh){ + import("sewing-table-rear-profile.dxf", convexity=10); // spline, Pink3 + } +} + +module Machine_NewRearCurve(){ + slant = atan2(4,210-10); + echo("SL",slant); + translate([0,0, rearcurve_double_inrad]) rotate([slant,0,0]){ + translate([ rearcurve_double_inrad, + 0, + -rearcurve_double_inrad + 10 ]){ + rotate([180,0,0]) rotate([0,0,90]) linear_extrude(height=30){ + hull(){ + Machine_NewRearProfile(); + translate([0,-100]) Machine_NewRearProfile(); + } + } + } + rotate([0,90,0]) rotate([90,0,0]) { + intersection(){ + rotate_extrude(convexity=10, $fn=64) + rotate(90) + translate([ 0, -rearcurve_double_inrad ]) + Machine_NewRearProfile(); + translate([0,0,-500]) + cube([500,500,1000]); + } + } + translate([1,0,-rearcurve_double_inrad]) + rotate([0,-90,0]) rotate([0,0,-90]) + linear_extrude(height= rearcurve_strt_len + 1) + Machine_NewRearProfile(); + } +} + +module Machine_RearProfile(){ ////toplevel intersection(){ Machine_Profile(); translate([ -200 + machine_rear_to_front/2, -100 ]) { @@ -437,7 +496,7 @@ module Machine_Curves(){ ////toplevel //%cube([20,20,20]); translate([ -reartablet_x, -1, - -reartablet_z]) + -reartablet_z + tablet_z_slop]) mirror([0,0,1]) cube([ reartablet_x+1, reartablet_y+1, @@ -445,7 +504,7 @@ module Machine_Curves(){ ////toplevel } translate([ tile01_tr[0] - cutout_l_end_x + rearedge_len, cutout_tile11_y, - 0 ]){ + frontcurve_z_slop ]){ translate([ 0, -first_front[0] , 0 ]) multmatrix([[1, -frontcurve_side_skew, 0, 0], [0, 1, 0, 0], @@ -461,31 +520,7 @@ module Machine_Curves(){ ////toplevel translate([ rearcurve_strt_len, 0, rearcurve_z_slop ]){ - translate([ 1, - 0, - 0 - ]){ - rotate([0,-90,0])rotate([0,0,-90]){ - linear_extrude(height= rearcurve_strt_len + 1) - Machine_RearProfile(); - } - } - translate([ 0, - 0, - rearcurve_double_inrad ]) { - intersection(){ - rotate([90,0,0]){ - rotate_extrude(convexity=10, $fn=32) { - rotate([0,0,90]) translate([ 0, - -rearcurve_double_inrad ]) { - Machine_RearProfile(); - } - } - } - mirror([0,0,1]) - translate([0,-75,0]) cube([150,150,150]); - } - } + Machine_NewRearCurve(); } } } @@ -494,7 +529,7 @@ module Machine(){ ////toplevel Machine_Arm(); Machine_Curves(); } - + function Rectangle_corners(c0, sz) = // returns the corners of a rectangle from c0 to c0+sz // if sz is positive, the corners are anticlockwise starting with c0 @@ -520,6 +555,39 @@ m4_dnl expands to two comma-separated corners: m4_dnl that denoted by ix, and the next one anticlockwise m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]') +module FitTest_general(c0,sz, dobrace=false){ + c = Rectangle_corners(c0, sz); + brace = [7,7,9]; + difference(){ + union(){ + Rectangle_TileBase(c); + if (dobrace) { + translate(concat(c0, [-brace[2] + 0.1])){ + difference(){ + cube(concat(sz,[brace[2]]) - [5,0,0]); + translate(brace + [0,0, -25]) + cube(concat(sz, [50]) - brace*2 + [10,0,0]); + } + } + } + RoundEdge(R_EDGE(c,1)); + } + Machine(); + } +} + +module FitTest_Entire(){ ////toplevel + FitTest_general([-40,-80], [275,180], dobrace=true); +} + +module FitTest_RearCurve(){ ////toplevel + FitTest_general([110,0], [170,100]); +} + +module FitTest_FrontCurve(){ ////toplevel + FitTest_general([110,-80], [170,80]); +} + module Tile02(){ ////toplevel sz = [100,170]; c0 = tile02_tr + -sz; @@ -683,4 +751,8 @@ module Demo(){ ////toplevel //Demo(); //Machine_Profile(); -//Machine_RearProfile(); +//Machine_NewRearProfile(); +//Machine_NewRearCurve(); +//Machine_Curves(); +//Machine(); +//FitTest();