X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=resources%2Flocale%2Fen%2FLC_MESSAGES%2FCura.po;fp=resources%2Flocale%2Fen%2FLC_MESSAGES%2FCura.po;h=c755e22de31f6f51e6ad84fbc147bc2e822e26b1;hb=5e1923e42ca86698b7641eca31ea1693f52e0d8b;hp=3584f32468cb0d3ec0384e00727cce4cad086db8;hpb=0c38bf582064bc5ca6d7ab08f35520ac886cc66c;p=cura.git

diff --git a/resources/locale/en/LC_MESSAGES/Cura.po b/resources/locale/en/LC_MESSAGES/Cura.po
index 3584f324..c755e22d 100644
--- a/resources/locale/en/LC_MESSAGES/Cura.po
+++ b/resources/locale/en/LC_MESSAGES/Cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Cura\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2014-10-22 10:17+0200\n"
+"POT-Creation-Date: 2014-12-08 10:01+0100\n"
 "PO-Revision-Date: 2013-09-27 09:41+0100\n"
 "Last-Translator: \n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -16,11 +16,11 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: Poedit 1.5.7\n"
 
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
 msgid "A new version of Cura is available, would you like to download?"
 msgstr ""
 
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610
+#: Cura/gui/app.py:141 Cura/gui/mainWindow.py:613
 msgid "New version available"
 msgstr ""
 
@@ -44,23 +44,27 @@ msgstr ""
 msgid "Select your language:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:279
+#: Cura/gui/configWizard.py:266
+msgid "Older models"
+msgstr ""
+
+#: Cura/gui/configWizard.py:283
 msgid "Printrbot Selection"
 msgstr ""
 
-#: Cura/gui/configWizard.py:280
+#: Cura/gui/configWizard.py:285
 msgid "Select which Printrbot machine you have:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:316
+#: Cura/gui/configWizard.py:323
 msgid "Other machine information"
 msgstr ""
 
-#: Cura/gui/configWizard.py:317
+#: Cura/gui/configWizard.py:324
 msgid "The following pre-defined machine profiles are available"
 msgstr ""
 
-#: Cura/gui/configWizard.py:318
+#: Cura/gui/configWizard.py:325
 msgid ""
 "Note that these profiles are not guaranteed to give good results,\n"
 "or work at all. Extra tweaks might be required.\n"
@@ -69,850 +73,850 @@ msgid ""
 "Please report it at the github issue tracker."
 msgstr ""
 
-#: Cura/gui/configWizard.py:329
+#: Cura/gui/configWizard.py:336
 msgid "Custom..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:347
+#: Cura/gui/configWizard.py:354
 msgid "Cura Ready!"
 msgstr ""
 
-#: Cura/gui/configWizard.py:348
+#: Cura/gui/configWizard.py:355
 msgid "Cura is now ready to be used!"
 msgstr ""
 
-#: Cura/gui/configWizard.py:352
+#: Cura/gui/configWizard.py:359
 msgid "Custom RepRap information"
 msgstr ""
 
-#: Cura/gui/configWizard.py:353
+#: Cura/gui/configWizard.py:360
 msgid ""
 "RepRap machines can be vastly different, so here you can set your own "
 "settings."
 msgstr ""
 
-#: Cura/gui/configWizard.py:354
+#: Cura/gui/configWizard.py:361
 msgid ""
 "Be sure to review the default profile before running it on your machine."
 msgstr ""
 
-#: Cura/gui/configWizard.py:355
+#: Cura/gui/configWizard.py:362
 msgid ""
 "If you like a default profile for your machine added,\n"
 "then make an issue on github."
 msgstr ""
 
-#: Cura/gui/configWizard.py:357
+#: Cura/gui/configWizard.py:364
 msgid "You will have to manually install Marlin or Sprinter firmware."
 msgstr ""
 
-#: Cura/gui/configWizard.py:359
+#: Cura/gui/configWizard.py:366
 msgid "Machine name"
 msgstr ""
 
-#: Cura/gui/configWizard.py:360
+#: Cura/gui/configWizard.py:367
 msgid "Machine width (mm)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:361
+#: Cura/gui/configWizard.py:368
 msgid "Machine depth (mm)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:362
+#: Cura/gui/configWizard.py:369
 msgid "Machine height (mm)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175
+#: Cura/gui/configWizard.py:370 Cura/util/profile.py:183
 msgid "Nozzle size (mm)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503
+#: Cura/gui/configWizard.py:371 Cura/util/profile.py:514
 msgid "Heated bed"
 msgstr ""
 
-#: Cura/gui/configWizard.py:365
+#: Cura/gui/configWizard.py:372
 msgid "Bed center is 0,0,0 (RoStock)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:385
+#: Cura/gui/configWizard.py:392
 msgid "Select your machine"
 msgstr ""
 
-#: Cura/gui/configWizard.py:386
+#: Cura/gui/configWizard.py:393
 msgid "What kind of machine do you have:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:401
+#: Cura/gui/configWizard.py:408
 msgid "Other (Ex: RepRap, MakerBot, Witbox)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:404
+#: Cura/gui/configWizard.py:411
 msgid ""
 "The collection of anonymous usage information helps with the continued "
 "improvement of Cura."
 msgstr ""
 
-#: Cura/gui/configWizard.py:405
+#: Cura/gui/configWizard.py:412
 msgid ""
 "This does NOT submit your models online nor gathers any privacy related "
 "information."
 msgstr ""
 
-#: Cura/gui/configWizard.py:406
+#: Cura/gui/configWizard.py:413
 msgid "Submit anonymous usage information:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:407
+#: Cura/gui/configWizard.py:414
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"
 msgstr ""
 
-#: Cura/gui/configWizard.py:524
+#: Cura/gui/configWizard.py:531
 msgid "Select upgraded parts you have"
 msgstr ""
 
-#: Cura/gui/configWizard.py:525
+#: Cura/gui/configWizard.py:532
 msgid ""
 "To assist you in having better default settings for your Ultimaker\n"
 "Cura would like to know which upgrades you have in your machine."
 msgstr ""
 
-#: Cura/gui/configWizard.py:527
+#: Cura/gui/configWizard.py:534
 msgid "Extruder drive upgrade"
 msgstr ""
 
-#: Cura/gui/configWizard.py:528
+#: Cura/gui/configWizard.py:535
 msgid "Heated printer bed (kit)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:529
+#: Cura/gui/configWizard.py:536
 msgid "Heated printer bed (self built)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:530
+#: Cura/gui/configWizard.py:537
 msgid "Dual extrusion (experimental)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:532
+#: Cura/gui/configWizard.py:539
 msgid ""
 "If you have an Ultimaker bought after october 2012 you will have the\n"
 "Extruder drive upgrade. If you do not have this upgrade,\n"
 "it is highly recommended to improve reliability."
 msgstr ""
 
-#: Cura/gui/configWizard.py:533
+#: Cura/gui/configWizard.py:540
 msgid ""
 "This upgrade can be bought from the Ultimaker webshop\n"
 "or found on thingiverse as thing:26094"
 msgstr ""
 
-#: Cura/gui/configWizard.py:555
+#: Cura/gui/configWizard.py:562
 msgid "Upgrade Ultimaker Firmware"
 msgstr ""
 
-#: Cura/gui/configWizard.py:556
+#: Cura/gui/configWizard.py:563
 msgid ""
 "Firmware is the piece of software running directly on your 3D printer.\n"
 "This firmware controls the step motors, regulates the temperature\n"
 "and ultimately makes your printer work."
 msgstr ""
 
-#: Cura/gui/configWizard.py:558
+#: Cura/gui/configWizard.py:565
 msgid ""
 "The firmware shipping with new Ultimakers works, but upgrades\n"
 "have been made to make better prints, and make calibration easier."
 msgstr ""
 
-#: Cura/gui/configWizard.py:560
+#: Cura/gui/configWizard.py:567
 msgid ""
 "Cura requires these new features and thus\n"
 "your firmware will most likely need to be upgraded.\n"
 "You will get the chance to do so now."
 msgstr ""
 
-#: Cura/gui/configWizard.py:566
+#: Cura/gui/configWizard.py:573
 msgid "Do not upgrade to this firmware if:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:567
+#: Cura/gui/configWizard.py:574
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:568
+#: Cura/gui/configWizard.py:575
 msgid "* Build your own heated bed"
 msgstr ""
 
-#: Cura/gui/configWizard.py:569
+#: Cura/gui/configWizard.py:576
 msgid "* Have other changes in the firmware"
 msgstr ""
 
-#: Cura/gui/configWizard.py:589
+#: Cura/gui/configWizard.py:596
 msgid "Ultimaker Checkup"
 msgstr ""
 
-#: Cura/gui/configWizard.py:603
+#: Cura/gui/configWizard.py:610
 msgid ""
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"
 "You can skip these if you know your machine is functional."
 msgstr ""
 
-#: Cura/gui/configWizard.py:604
+#: Cura/gui/configWizard.py:611
 msgid "Run checks"
 msgstr ""
 
-#: Cura/gui/configWizard.py:604
+#: Cura/gui/configWizard.py:611
 msgid "Skip checks"
 msgstr ""
 
-#: Cura/gui/configWizard.py:608
+#: Cura/gui/configWizard.py:615
 msgid "Communication:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:609
+#: Cura/gui/configWizard.py:616
 msgid "Temperature:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:610
+#: Cura/gui/configWizard.py:617
 msgid "Endstops:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:615
+#: Cura/gui/configWizard.py:622
 msgid "Show error log"
 msgstr ""
 
-#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078
-#: Cura/gui/configWizard.py:1297
+#: Cura/gui/configWizard.py:656 Cura/gui/configWizard.py:1093
+#: Cura/gui/configWizard.py:1312
 msgid "Connecting to machine."
 msgstr ""
 
-#: Cura/gui/configWizard.py:670
+#: Cura/gui/configWizard.py:677
 msgid "Cooldown before temperature check."
 msgstr ""
 
-#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683
+#: Cura/gui/configWizard.py:683 Cura/gui/configWizard.py:690
 msgid "Checking the heater and temperature sensor."
 msgstr ""
 
-#: Cura/gui/configWizard.py:694
+#: Cura/gui/configWizard.py:701
 msgid "Please make sure none of the endstops are pressed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:707
+#: Cura/gui/configWizard.py:714
 msgid "Temperature measurement FAILED!"
 msgstr ""
 
-#: Cura/gui/configWizard.py:712
+#: Cura/gui/configWizard.py:719
 #, python-format
 msgid "Head temperature: %d"
 msgstr ""
 
-#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728
+#: Cura/gui/configWizard.py:726 Cura/gui/configWizard.py:735
 #, python-format
 msgid "Communication State: %s"
 msgstr ""
 
-#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255
-#: Cura/gui/configWizard.py:1473
+#: Cura/gui/configWizard.py:729 Cura/gui/configWizard.py:1270
+#: Cura/gui/configWizard.py:1488
 msgid "Failed to establish connection with the printer."
 msgstr ""
 
-#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777
+#: Cura/gui/configWizard.py:775 Cura/gui/configWizard.py:784
 msgid "Please press the left X endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:772
+#: Cura/gui/configWizard.py:779
 msgid "Please press the right X endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:782
+#: Cura/gui/configWizard.py:789
 msgid "Please press the front Y endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797
+#: Cura/gui/configWizard.py:795 Cura/gui/configWizard.py:804
 msgid "Please press the top Z endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:792
+#: Cura/gui/configWizard.py:799
 msgid "Please press the back Y endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817
+#: Cura/gui/configWizard.py:811 Cura/gui/configWizard.py:824
 msgid "Checkup finished"
 msgstr ""
 
-#: Cura/gui/configWizard.py:811
+#: Cura/gui/configWizard.py:818
 msgid "Please press the bottom Z endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855
+#: Cura/gui/configWizard.py:839 Cura/gui/configWizard.py:862
 msgid "Ultimaker Calibration"
 msgstr ""
 
-#: Cura/gui/configWizard.py:860
+#: Cura/gui/configWizard.py:867
 msgid "Calibrating the Steps Per E requires some manual actions."
 msgstr ""
 
-#: Cura/gui/configWizard.py:861
+#: Cura/gui/configWizard.py:868
 msgid "First remove any filament from your machine."
 msgstr ""
 
-#: Cura/gui/configWizard.py:862
+#: Cura/gui/configWizard.py:869
 msgid ""
 "Next put in your filament so the tip is aligned with the\n"
 "top of the extruder drive."
 msgstr ""
 
-#: Cura/gui/configWizard.py:863
+#: Cura/gui/configWizard.py:870
 msgid "We'll push the filament 100mm"
 msgstr ""
 
-#: Cura/gui/configWizard.py:864
+#: Cura/gui/configWizard.py:871
 msgid "Extrude 100mm filament"
 msgstr ""
 
-#: Cura/gui/configWizard.py:865
+#: Cura/gui/configWizard.py:872
 msgid ""
 "Now measure the amount of extruded filament:\n"
 "(this can be more or less then 100mm)"
 msgstr ""
 
-#: Cura/gui/configWizard.py:866
+#: Cura/gui/configWizard.py:873
 msgid "Save"
 msgstr ""
 
-#: Cura/gui/configWizard.py:867
+#: Cura/gui/configWizard.py:874
 msgid "This results in the following steps per E:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:869
+#: Cura/gui/configWizard.py:876
 msgid "You can repeat these steps to get better calibration."
 msgstr ""
 
-#: Cura/gui/configWizard.py:872
+#: Cura/gui/configWizard.py:879
 msgid ""
 "If you still have filament in your printer which needs\n"
 "heat to remove, press the heat up button below:"
 msgstr ""
 
-#: Cura/gui/configWizard.py:873
+#: Cura/gui/configWizard.py:880
 msgid "Heatup for filament removal"
 msgstr ""
 
-#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932
+#: Cura/gui/configWizard.py:905 Cura/gui/configWizard.py:939
 msgid ""
 "Error: Failed to open serial port to machine\n"
 "If this keeps happening, try disconnecting and reconnecting the USB cable"
 msgstr ""
 
-#: Cura/gui/configWizard.py:972
+#: Cura/gui/configWizard.py:979
 msgid "Ultimaker2"
 msgstr ""
 
-#: Cura/gui/configWizard.py:973
+#: Cura/gui/configWizard.py:980
 msgid "Congratulations on your the purchase of your brand new Ultimaker2."
 msgstr ""
 
-#: Cura/gui/configWizard.py:974
+#: Cura/gui/configWizard.py:981
 msgid "Cura is now ready to be used with your Ultimaker2."
 msgstr ""
 
-#: Cura/gui/configWizard.py:979
+#: Cura/gui/configWizard.py:986
 msgid "Lulzbot TAZ/Mini"
 msgstr ""
 
-#: Cura/gui/configWizard.py:980
+#: Cura/gui/configWizard.py:987
 msgid "Cura is now ready to be used with your Lulzbot."
 msgstr ""
 
-#: Cura/gui/configWizard.py:985
+#: Cura/gui/configWizard.py:992
 msgid "Configuration Wizard"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486
+#: Cura/gui/configWizard.py:1053 Cura/gui/configWizard.py:1501
 msgid "Bed leveling wizard"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1040
+#: Cura/gui/configWizard.py:1055
 msgid "This wizard will help you in leveling your printer bed"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1042
+#: Cura/gui/configWizard.py:1057
 msgid "It will do the following steps"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1043
+#: Cura/gui/configWizard.py:1058
 msgid "* Move the printer head to each corner"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1044
+#: Cura/gui/configWizard.py:1059
 msgid "  and let you adjust the height of the bed to the nozzle"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1045
+#: Cura/gui/configWizard.py:1060
 msgid "* Print a line around the bed to check if it is level"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273
+#: Cura/gui/configWizard.py:1063 Cura/gui/configWizard.py:1288
 msgid "Connect to printer"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279
+#: Cura/gui/configWizard.py:1067 Cura/gui/configWizard.py:1294
 msgid "Resume"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1053
+#: Cura/gui/configWizard.py:1068
 msgid "Up 0.2mm"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1053
+#: Cura/gui/configWizard.py:1068
 msgid "Down 0.2mm"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1054
+#: Cura/gui/configWizard.py:1069
 msgid "Up 10mm"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1054
+#: Cura/gui/configWizard.py:1069
 msgid "Down 10mm"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1114
+#: Cura/gui/configWizard.py:1129
 msgid "Homing printer..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1124
+#: Cura/gui/configWizard.py:1139
 msgid "Moving head to back center..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1131
+#: Cura/gui/configWizard.py:1146
 msgid "Moving head to back left corner..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153
+#: Cura/gui/configWizard.py:1154 Cura/gui/configWizard.py:1168
 msgid "Moving head to front right corner..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1146
+#: Cura/gui/configWizard.py:1161
 msgid "Moving head to back right corner..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1160
+#: Cura/gui/configWizard.py:1175
 msgid "Heating up printer..."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1167
+#: Cura/gui/configWizard.py:1182
 msgid "Printing a square on the printer bed at 0.3mm height."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1207
+#: Cura/gui/configWizard.py:1222
 msgid ""
 "Adjust the front left screw of your printer bed\n"
 "So the nozzle just hits the bed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1212
+#: Cura/gui/configWizard.py:1227
 msgid ""
 "Adjust the back screw of your printer bed\n"
 "So the nozzle just hits the bed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1214
+#: Cura/gui/configWizard.py:1229
 msgid ""
 "Adjust the back left screw of your printer bed\n"
 "So the nozzle just hits the bed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1218
+#: Cura/gui/configWizard.py:1233
 msgid ""
 "Adjust the back right screw of your printer bed\n"
 "So the nozzle just hits the bed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1222
+#: Cura/gui/configWizard.py:1237
 msgid ""
 "Adjust the front right screw of your printer bed\n"
 "So the nozzle just hits the bed."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1226
+#: Cura/gui/configWizard.py:1241
 #, python-format
 msgid "Heating up printer: %d/%d"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1228
+#: Cura/gui/configWizard.py:1243
 msgid ""
 "The printer is hot now. Please insert some PLA filament into the printer."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1237
+#: Cura/gui/configWizard.py:1252
 msgid "Use the up/down buttons to move the bed and adjust your Z endstop."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1249
+#: Cura/gui/configWizard.py:1264
 msgid ""
 "Calibration finished.\n"
 "The squares on the bed should slightly touch each other."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1270
+#: Cura/gui/configWizard.py:1285
 msgid ""
 "This wizard will help you in calibrating the printer head offsets of your "
 "dual extrusion machine"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1303
+#: Cura/gui/configWizard.py:1318
 msgid "Printing initial calibration cross"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1351
+#: Cura/gui/configWizard.py:1366
 msgid ""
 "Please measure the distance between the horizontal lines in millimeters."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1361
+#: Cura/gui/configWizard.py:1376
 msgid "Printing the fine calibration lines."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1416
+#: Cura/gui/configWizard.py:1431
 msgid ""
 "Which horizontal line number lays perfect on top of each other? Front most "
 "line is zero."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1427
+#: Cura/gui/configWizard.py:1442
 #, python-format
 msgid "Calibration finished. Offsets are: %s %s"
 msgstr ""
 
-#: Cura/gui/configWizard.py:1440
+#: Cura/gui/configWizard.py:1455
 msgid "Please load both extruders with PLA."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1449
+#: Cura/gui/configWizard.py:1464
 msgid "Homing printer and heating up both extruders."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1459
+#: Cura/gui/configWizard.py:1474
 msgid "Please measure the distance between the vertical lines in millimeters."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1466
+#: Cura/gui/configWizard.py:1481
 msgid ""
 "Which vertical line number lays perfect on top of each other? Leftmost line "
 "is zero."
 msgstr ""
 
-#: Cura/gui/configWizard.py:1515
+#: Cura/gui/configWizard.py:1530
 msgid "Head offset wizard"
 msgstr ""
 
-#: Cura/gui/expertConfig.py:25
+#: Cura/gui/expertConfig.py:27
 msgid "Expert config"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:59
+#: Cura/gui/firmwareInstall.py:64
 msgid ""
 "I am sorry, but Cura does not ship with a default firmware for your machine "
 "configuration."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64
-#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:541
+#: Cura/gui/firmwareInstall.py:64 Cura/gui/firmwareInstall.py:69
+#: Cura/gui/firmwareInstall.py:124 Cura/gui/mainWindow.py:543
 msgid "Firmware update"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:64
+#: Cura/gui/firmwareInstall.py:69
 msgid ""
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"
 "So updating your RepRap with Cura might or might not work."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175
+#: Cura/gui/firmwareInstall.py:77 Cura/gui/firmwareInstall.py:181
 msgid "OK"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206
+#: Cura/gui/firmwareInstall.py:98 Cura/gui/firmwareInstall.py:265
 msgid "Reading firmware..."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208
+#: Cura/gui/firmwareInstall.py:100 Cura/gui/firmwareInstall.py:267
 msgid "Connecting to machine..."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212
+#: Cura/gui/firmwareInstall.py:104 Cura/gui/firmwareInstall.py:271
 msgid ""
 "Please connect the printer to\n"
 "your computer with the USB cable."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:118
+#: Cura/gui/firmwareInstall.py:123
 msgid ""
 "Failed to find machine for firmware upgrade\n"
 "Is your machine connected to the PC?"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:125
+#: Cura/gui/firmwareInstall.py:130
 msgid ""
 "Failed to install firmware:\n"
 "This firmware is not compatible with this machine.\n"
 "Trying to install UMO firmware on an UM2 or UMO+?"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:131
+#: Cura/gui/firmwareInstall.py:136
 msgid ""
 "Failed to install firmware:\n"
 "This firmware is not compatible with this machine.\n"
 "Trying to install UM2 or UMO+ firmware on an UMO?"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:293
 msgid "Uploading firmware..."
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237
+#: Cura/gui/firmwareInstall.py:144 Cura/gui/firmwareInstall.py:296
 #, python-format
 msgid ""
 "Done!\n"
 "Installed firmware: %s"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239
+#: Cura/gui/firmwareInstall.py:146 Cura/gui/firmwareInstall.py:298
 msgid "Failed to write firmware.\n"
 msgstr ""
 
-#: Cura/gui/firmwareInstall.py:231
+#: Cura/gui/firmwareInstall.py:290
 msgid "Failed to connect to programmer.\n"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:68
+#: Cura/gui/mainWindow.py:72
 msgid "Load model file...\tCTRL+L"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:70
+#: Cura/gui/mainWindow.py:74
 msgid "Save model...\tCTRL+S"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:72
+#: Cura/gui/mainWindow.py:76
 msgid "Reload platform\tF5"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:74
+#: Cura/gui/mainWindow.py:78
 msgid "Clear platform"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:78
+#: Cura/gui/mainWindow.py:82
 msgid "Print...\tCTRL+P"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:80 Cura/gui/sceneView.py:279
+#: Cura/gui/mainWindow.py:84 Cura/gui/sceneView.py:279
 msgid "Save GCode..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:82
+#: Cura/gui/mainWindow.py:86
 msgid "Show slice engine log..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:86
+#: Cura/gui/mainWindow.py:90
 msgid "Open Profile..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:89
+#: Cura/gui/mainWindow.py:93
 msgid "Save Profile..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:92
+#: Cura/gui/mainWindow.py:96
 msgid "Load Profile from GCode..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:96
+#: Cura/gui/mainWindow.py:100
 msgid "Reset Profile to default"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:101
+#: Cura/gui/mainWindow.py:105
 msgid "Preferences...\tCTRL+,"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:103 Cura/gui/mainWindow.py:467
+#: Cura/gui/mainWindow.py:107 Cura/gui/mainWindow.py:469
 msgid "Machine settings..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:109
+#: Cura/gui/mainWindow.py:113
 msgid "Recent Model Files"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:116
+#: Cura/gui/mainWindow.py:120
 msgid "Recent Profile Files"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:122
+#: Cura/gui/mainWindow.py:126
 msgid "Quit"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:124
+#: Cura/gui/mainWindow.py:128
 msgid "File"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:132
+#: Cura/gui/mainWindow.py:136
 msgid "Minecraft map import..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:136
+#: Cura/gui/mainWindow.py:140
 msgid "PID Debugger..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:138
+#: Cura/gui/mainWindow.py:142
 msgid "Auto Firmware Update..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:141
+#: Cura/gui/mainWindow.py:145
 msgid "Copy profile to clipboard"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:145
+#: Cura/gui/mainWindow.py:149
 msgid "Print all at once"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:147
+#: Cura/gui/mainWindow.py:151
 msgid "Print one at a time"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:154
+#: Cura/gui/mainWindow.py:158
 msgid "Tools"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:160 Cura/util/profile.py:175
+#: Cura/gui/mainWindow.py:164 Cura/util/profile.py:183
 msgid "Machine"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:163
+#: Cura/gui/mainWindow.py:167
 msgid "Switch to quickprint..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:167
+#: Cura/gui/mainWindow.py:171
 msgid "Switch to full settings..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:172
-msgid "Open expert settings...\tCTRL+E"
-msgstr ""
-
 #: Cura/gui/mainWindow.py:176
-msgid "Run first run wizard..."
+msgid "Open expert settings...\tCTRL+E"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:178
+#: Cura/gui/mainWindow.py:180
 msgid "Run bed leveling wizard..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:180
+#: Cura/gui/mainWindow.py:182
 msgid "Run head offset wizard..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:183
+#: Cura/gui/mainWindow.py:185
 msgid "Expert"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:186
+#: Cura/gui/mainWindow.py:188
 msgid "Online documentation..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:188
+#: Cura/gui/mainWindow.py:190
 msgid "Report a problem..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:190
+#: Cura/gui/mainWindow.py:192
 msgid "Check for update..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:192
+#: Cura/gui/mainWindow.py:194
 msgid "Open YouMagine website..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:194
+#: Cura/gui/mainWindow.py:196
 msgid "About Cura..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:196
+#: Cura/gui/mainWindow.py:198
 msgid "Help"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:376
+#: Cura/gui/mainWindow.py:379
 msgid ""
 "For \"One at a time\" printing, you need to have entered the correct head "
 "size and gantry height in the machine settings"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:376
+#: Cura/gui/mainWindow.py:379
 msgid "One at a time warning"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:473
+#: Cura/gui/mainWindow.py:467
+msgid "Add new machine..."
+msgstr ""
+
+#: Cura/gui/mainWindow.py:475
 msgid "Install default firmware..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:476
+#: Cura/gui/mainWindow.py:478
 msgid "Install custom firmware..."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:480
+#: Cura/gui/mainWindow.py:482
 msgid "Select profile file to load"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:492
+#: Cura/gui/mainWindow.py:494
 msgid "Select gcode file to load profile from"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:507
+#: Cura/gui/mainWindow.py:509
 msgid ""
 "No profile found in GCode file.\n"
 "This feature only works with GCode files made by Cura 12.07 or newer."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:507
+#: Cura/gui/mainWindow.py:509
 msgid "Profile load error"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:511
+#: Cura/gui/mainWindow.py:513
 msgid "Select profile file to save"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:521
+#: Cura/gui/mainWindow.py:523
 msgid ""
 "This will reset all profile settings to defaults.\n"
 "Unless you have saved your current profile, all settings will be lost!\n"
 "Do you really want to reset?"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:521
+#: Cura/gui/mainWindow.py:523
 msgid "Profile reset"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:541
+#: Cura/gui/mainWindow.py:543
 msgid ""
 "Warning: Installing a custom firmware does not guarantee that you machine "
 "will function correctly, and could damage your machine."
 msgstr ""
 
-#: Cura/gui/mainWindow.py:542 Cura/gui/mainWindow.py:584
+#: Cura/gui/mainWindow.py:544 Cura/gui/mainWindow.py:587
 msgid "Open firmware to upload"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:613
+#: Cura/gui/mainWindow.py:616
 msgid "You are running the latest version of Cura!"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:613
+#: Cura/gui/mainWindow.py:616
 msgid "Awesome!"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:658
+#: Cura/gui/mainWindow.py:661
 msgid "Basic"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:662
+#: Cura/gui/mainWindow.py:665
 msgid "Advanced"
 msgstr ""
 
-#: Cura/gui/mainWindow.py:668
+#: Cura/gui/mainWindow.py:671
 msgid "Plugins"
 msgstr ""
 
@@ -948,7 +952,7 @@ msgstr ""
 msgid "Colours"
 msgstr ""
 
-#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:478
+#: Cura/gui/preferencesDialog.py:37 Cura/util/profile.py:489
 msgid "Language"
 msgstr ""
 
@@ -989,19 +993,19 @@ msgstr ""
 msgid "Remove machine"
 msgstr ""
 
-#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:167
 msgid "Change machine name"
 msgstr ""
 
-#: Cura/gui/preferencesDialog.py:154
+#: Cura/gui/preferencesDialog.py:153
 msgid "Cannot remove the last machine configuration in Cura"
 msgstr ""
 
-#: Cura/gui/preferencesDialog.py:154
+#: Cura/gui/preferencesDialog.py:153
 msgid "Machine remove error"
 msgstr ""
 
-#: Cura/gui/preferencesDialog.py:168
+#: Cura/gui/preferencesDialog.py:167
 msgid "Enter the new name:"
 msgstr ""
 
@@ -1462,17 +1466,17 @@ msgstr ""
 msgid "3D window error"
 msgstr ""
 
-#: Cura/util/profile.py:170 Cura/util/profile.py:171 Cura/util/profile.py:172
-#: Cura/util/profile.py:200 Cura/util/profile.py:201 Cura/util/profile.py:202
-#: Cura/util/profile.py:204
+#: Cura/util/profile.py:178 Cura/util/profile.py:179 Cura/util/profile.py:180
+#: Cura/util/profile.py:208 Cura/util/profile.py:209 Cura/util/profile.py:210
+#: Cura/util/profile.py:212
 msgid "Quality"
 msgstr ""
 
-#: Cura/util/profile.py:170
+#: Cura/util/profile.py:178
 msgid "Layer height (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:170
+#: Cura/util/profile.py:178
 msgid ""
 "Layer height in millimeters.\n"
 "This is the most important setting to determine the quality of your print. "
@@ -1480,36 +1484,36 @@ msgid ""
 "0.25mm with an Ultimaker for very fast prints at low quality."
 msgstr ""
 
-#: Cura/util/profile.py:171
+#: Cura/util/profile.py:179
 msgid "Shell thickness (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:171
+#: Cura/util/profile.py:179
 msgid ""
 "Thickness of the outside shell in the horizontal direction.\n"
 "This is used in combination with the nozzle size to define the number\n"
 "of perimeter lines and the thickness of those perimeter lines."
 msgstr ""
 
-#: Cura/util/profile.py:172
+#: Cura/util/profile.py:180
 msgid "Enable retraction"
 msgstr ""
 
-#: Cura/util/profile.py:172
+#: Cura/util/profile.py:180
 msgid ""
 "Retract the filament when the nozzle is moving over a none-printed area. "
 "Details about the retraction can be configured in the advanced tab."
 msgstr ""
 
-#: Cura/util/profile.py:173 Cura/util/profile.py:174
+#: Cura/util/profile.py:181 Cura/util/profile.py:182
 msgid "Fill"
 msgstr ""
 
-#: Cura/util/profile.py:173
+#: Cura/util/profile.py:181
 msgid "Bottom/Top thickness (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:173
+#: Cura/util/profile.py:181
 msgid ""
 "This controls the thickness of the bottom and top layers, the amount of "
 "solid layers put down is calculated by the layer thickness and this value.\n"
@@ -1517,11 +1521,11 @@ msgid ""
 "near your wall thickness to make an evenly strong part."
 msgstr ""
 
-#: Cura/util/profile.py:174
+#: Cura/util/profile.py:182
 msgid "Fill Density (%)"
 msgstr ""
 
-#: Cura/util/profile.py:174
+#: Cura/util/profile.py:182
 msgid ""
 "This controls how densely filled the insides of your print will be. For a "
 "solid part use 100%, for an empty part use 0%. A value around 20% is usually "
@@ -1530,23 +1534,23 @@ msgid ""
 "part becomes."
 msgstr ""
 
-#: Cura/util/profile.py:175
+#: Cura/util/profile.py:183
 msgid ""
 "The nozzle size is very important, this is used to calculate the line width "
 "of the infill, and used to calculate the amount of outside wall lines and "
 "thickness for the wall thickness you entered in the print settings."
 msgstr ""
 
-#: Cura/util/profile.py:176 Cura/util/profile.py:177 Cura/util/profile.py:178
-#: Cura/util/profile.py:179 Cura/util/profile.py:180 Cura/util/profile.py:181
+#: Cura/util/profile.py:184 Cura/util/profile.py:185 Cura/util/profile.py:186
+#: Cura/util/profile.py:187 Cura/util/profile.py:188 Cura/util/profile.py:189
 msgid "Speed and Temperature"
 msgstr ""
 
-#: Cura/util/profile.py:176
+#: Cura/util/profile.py:184
 msgid "Print speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:176
+#: Cura/util/profile.py:184
 msgid ""
 "Speed at which printing happens. A well adjusted Ultimaker can reach 150mm/"
 "s, but for good quality prints you want to print slower. Printing speed "
@@ -1554,62 +1558,62 @@ msgid ""
 "settings for this."
 msgstr ""
 
-#: Cura/util/profile.py:177
+#: Cura/util/profile.py:185
 msgid "Printing temperature (C)"
 msgstr ""
 
-#: Cura/util/profile.py:177 Cura/util/profile.py:178 Cura/util/profile.py:179
-#: Cura/util/profile.py:180
+#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
+#: Cura/util/profile.py:188
 msgid ""
 "Temperature used for printing. Set at 0 to pre-heat yourself.\n"
 "For PLA a value of 210C is usually used.\n"
 "For ABS a value of 230C or higher is required."
 msgstr ""
 
-#: Cura/util/profile.py:178
+#: Cura/util/profile.py:186
 msgid "2nd nozzle temperature (C)"
 msgstr ""
 
-#: Cura/util/profile.py:179
+#: Cura/util/profile.py:187
 msgid "3th nozzle temperature (C)"
 msgstr ""
 
-#: Cura/util/profile.py:180
+#: Cura/util/profile.py:188
 msgid "4th nozzle temperature (C)"
 msgstr ""
 
-#: Cura/util/profile.py:181
+#: Cura/util/profile.py:189
 msgid "Bed temperature (C)"
 msgstr ""
 
-#: Cura/util/profile.py:181
+#: Cura/util/profile.py:189
 msgid ""
 "Temperature used for the heated printer bed. Set at 0 to pre-heat yourself."
 msgstr ""
 
-#: Cura/util/profile.py:182 Cura/util/profile.py:183
+#: Cura/util/profile.py:190 Cura/util/profile.py:191
 msgid "None"
 msgstr ""
 
-#: Cura/util/profile.py:182
+#: Cura/util/profile.py:190
 msgid "Touching buildplate"
 msgstr ""
 
-#: Cura/util/profile.py:182
+#: Cura/util/profile.py:190
 msgid "Everywhere"
 msgstr ""
 
-#: Cura/util/profile.py:182 Cura/util/profile.py:183 Cura/util/profile.py:184
-#: Cura/util/profile.py:224 Cura/util/profile.py:225 Cura/util/profile.py:226
-#: Cura/util/profile.py:227 Cura/util/profile.py:228
+#: Cura/util/profile.py:190 Cura/util/profile.py:191 Cura/util/profile.py:192
+#: Cura/util/profile.py:232 Cura/util/profile.py:233 Cura/util/profile.py:234
+#: Cura/util/profile.py:235 Cura/util/profile.py:236
 msgid "Support"
 msgstr ""
 
-#: Cura/util/profile.py:182
+#: Cura/util/profile.py:190
 msgid "Support type"
 msgstr ""
 
-#: Cura/util/profile.py:182
+#: Cura/util/profile.py:190
 msgid ""
 "Type of support structure build.\n"
 "\"Touching buildplate\" is the most commonly used support setting.\n"
@@ -1620,21 +1624,22 @@ msgid ""
 "Everywhere creates support even on top of parts of the model."
 msgstr ""
 
-#: Cura/util/profile.py:183 Cura/util/profile.py:232
+#: Cura/util/profile.py:191 Cura/util/profile.py:240
 msgid "Brim"
 msgstr ""
 
-#: Cura/util/profile.py:183 Cura/util/profile.py:233 Cura/util/profile.py:234
-#: Cura/util/profile.py:235 Cura/util/profile.py:236 Cura/util/profile.py:237
-#: Cura/util/profile.py:238 Cura/util/profile.py:239 Cura/util/profile.py:240
+#: Cura/util/profile.py:191 Cura/util/profile.py:241 Cura/util/profile.py:242
+#: Cura/util/profile.py:243 Cura/util/profile.py:244 Cura/util/profile.py:245
+#: Cura/util/profile.py:246 Cura/util/profile.py:247 Cura/util/profile.py:248
+#: Cura/util/profile.py:249 Cura/util/profile.py:250 Cura/util/profile.py:251
 msgid "Raft"
 msgstr ""
 
-#: Cura/util/profile.py:183
+#: Cura/util/profile.py:191
 msgid "Platform adhesion type"
 msgstr ""
 
-#: Cura/util/profile.py:183
+#: Cura/util/profile.py:191
 msgid ""
 "Different options that help in preventing corners from lifting due to "
 "warping.\n"
@@ -1645,23 +1650,23 @@ msgid ""
 "(Note that enabling the brim or raft disables the skirt)"
 msgstr ""
 
-#: Cura/util/profile.py:184
+#: Cura/util/profile.py:192
 msgid "Both"
 msgstr ""
 
-#: Cura/util/profile.py:184
+#: Cura/util/profile.py:192
 msgid "First extruder"
 msgstr ""
 
-#: Cura/util/profile.py:184
+#: Cura/util/profile.py:192
 msgid "Second extruder"
 msgstr ""
 
-#: Cura/util/profile.py:184
+#: Cura/util/profile.py:192
 msgid "Support dual extrusion"
 msgstr ""
 
-#: Cura/util/profile.py:184
+#: Cura/util/profile.py:192
 msgid ""
 "Which extruder to use for support material, for break-away support you can "
 "use both extruders.\n"
@@ -1671,15 +1676,15 @@ msgid ""
 "You can also use the 2nd extruder for soluble support materials."
 msgstr ""
 
-#: Cura/util/profile.py:185 Cura/util/profile.py:186 Cura/util/profile.py:187
+#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
 msgid "Dual extrusion"
 msgstr ""
 
-#: Cura/util/profile.py:185
+#: Cura/util/profile.py:193
 msgid "Wipe&prime tower"
 msgstr ""
 
-#: Cura/util/profile.py:185
+#: Cura/util/profile.py:193
 msgid ""
 "The wipe-tower is a tower printed on every layer when switching between "
 "nozzles.\n"
@@ -1687,11 +1692,11 @@ msgid ""
 "print the 2nd color."
 msgstr ""
 
-#: Cura/util/profile.py:186
+#: Cura/util/profile.py:194
 msgid "Wipe&prime tower volume per layer (mm3)"
 msgstr ""
 
-#: Cura/util/profile.py:186
+#: Cura/util/profile.py:194
 msgid ""
 "The amount of material put in the wipe/prime tower.\n"
 "This is done in volume because in general you want to extrude a\n"
@@ -1700,135 +1705,135 @@ msgid ""
 "This means that with thinner layers, your tower gets bigger."
 msgstr ""
 
-#: Cura/util/profile.py:187
+#: Cura/util/profile.py:195
 msgid "Ooze shield"
 msgstr ""
 
-#: Cura/util/profile.py:187
+#: Cura/util/profile.py:195
 msgid ""
 "The ooze shield is a 1 line thick shell around the object which stands a few "
 "mm from the object.\n"
 "This shield catches any oozing from the unused nozzle in dual-extrusion."
 msgstr ""
 
-#: Cura/util/profile.py:188 Cura/util/profile.py:189 Cura/util/profile.py:190
-#: Cura/util/profile.py:191 Cura/util/profile.py:192
+#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
+#: Cura/util/profile.py:199 Cura/util/profile.py:200
 msgid "Filament"
 msgstr ""
 
-#: Cura/util/profile.py:188
+#: Cura/util/profile.py:196
 msgid "Diameter (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:188
+#: Cura/util/profile.py:196
 msgid ""
 "Diameter of your filament, as accurately as possible.\n"
 "If you cannot measure this value you will have to calibrate it, a higher "
 "number means less extrusion, a smaller number generates more extrusion."
 msgstr ""
 
-#: Cura/util/profile.py:189
+#: Cura/util/profile.py:197
 msgid "Diameter2 (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:189
+#: Cura/util/profile.py:197
 msgid ""
 "Diameter of your filament for the 2nd nozzle. Use 0 to use the same diameter "
 "as for nozzle 1."
 msgstr ""
 
-#: Cura/util/profile.py:190
+#: Cura/util/profile.py:198
 msgid "Diameter3 (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:190
+#: Cura/util/profile.py:198
 msgid ""
 "Diameter of your filament for the 3th nozzle. Use 0 to use the same diameter "
 "as for nozzle 1."
 msgstr ""
 
-#: Cura/util/profile.py:191
+#: Cura/util/profile.py:199
 msgid "Diameter4 (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:191
+#: Cura/util/profile.py:199
 msgid ""
 "Diameter of your filament for the 4th nozzle. Use 0 to use the same diameter "
 "as for nozzle 1."
 msgstr ""
 
-#: Cura/util/profile.py:192
+#: Cura/util/profile.py:200
 msgid "Flow (%)"
 msgstr ""
 
-#: Cura/util/profile.py:192
+#: Cura/util/profile.py:200
 msgid ""
 "Flow compensation, the amount of material extruded is multiplied by this "
 "value"
 msgstr ""
 
-#: Cura/util/profile.py:193 Cura/util/profile.py:194 Cura/util/profile.py:195
-#: Cura/util/profile.py:196 Cura/util/profile.py:197 Cura/util/profile.py:198
-#: Cura/util/profile.py:199
+#: Cura/util/profile.py:201 Cura/util/profile.py:202 Cura/util/profile.py:203
+#: Cura/util/profile.py:204 Cura/util/profile.py:205 Cura/util/profile.py:206
+#: Cura/util/profile.py:207
 msgid "Retraction"
 msgstr ""
 
-#: Cura/util/profile.py:193
+#: Cura/util/profile.py:201
 msgid "Speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:193
+#: Cura/util/profile.py:201
 msgid ""
 "Speed at which the filament is retracted, a higher retraction speed works "
 "better. But a very high retraction speed can lead to filament grinding."
 msgstr ""
 
-#: Cura/util/profile.py:194
+#: Cura/util/profile.py:202
 msgid "Distance (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:194
+#: Cura/util/profile.py:202
 msgid ""
 "Amount of retraction, set at 0 for no retraction at all. A value of 4.5mm "
 "seems to generate good results."
 msgstr ""
 
-#: Cura/util/profile.py:195
+#: Cura/util/profile.py:203
 msgid "Dual extrusion switch amount (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:195
+#: Cura/util/profile.py:203
 msgid ""
 "Amount of retraction when switching nozzle with dual-extrusion, set at 0 for "
 "no retraction at all. A value of 16.0mm seems to generate good results."
 msgstr ""
 
-#: Cura/util/profile.py:196
+#: Cura/util/profile.py:204
 msgid "Minimum travel (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:196
+#: Cura/util/profile.py:204
 msgid ""
 "Minimum amount of travel needed for a retraction to happen at all. To make "
 "sure you do not get a lot of retractions in a small area."
 msgstr ""
 
-#: Cura/util/profile.py:197
+#: Cura/util/profile.py:205
 msgid "Enable combing"
 msgstr ""
 
-#: Cura/util/profile.py:197
+#: Cura/util/profile.py:205
 msgid ""
 "Combing is the act of avoiding holes in the print for the head to travel "
 "over. If combing is disabled the printer head moves straight from the start "
 "point to the end point and it will always retract."
 msgstr ""
 
-#: Cura/util/profile.py:198
+#: Cura/util/profile.py:206
 msgid "Minimal extrusion before retracting (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:198
+#: Cura/util/profile.py:206
 msgid ""
 "The minimal amount of extrusion that needs to be done before retracting "
 "again if a retraction needs to happen before this minimal is reached the "
@@ -1837,100 +1842,100 @@ msgid ""
 "the filament and causes grinding issues."
 msgstr ""
 
-#: Cura/util/profile.py:199
+#: Cura/util/profile.py:207
 msgid "Z hop when retracting (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:199
+#: Cura/util/profile.py:207
 msgid ""
 "When a retraction is done, the head is lifted by this amount to travel over "
 "the print. A value of 0.075 works well. This feature has a lot of positive "
 "effect on delta towers."
 msgstr ""
 
-#: Cura/util/profile.py:200
+#: Cura/util/profile.py:208
 msgid "Initial layer thickness (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:200
+#: Cura/util/profile.py:208
 msgid ""
 "Layer thickness of the bottom layer. A thicker bottom layer makes sticking "
 "to the bed easier. Set to 0.0 to have the bottom layer thickness the same as "
 "the other layers."
 msgstr ""
 
-#: Cura/util/profile.py:201
+#: Cura/util/profile.py:209
 msgid "Initial layer line width (%)"
 msgstr ""
 
-#: Cura/util/profile.py:201
+#: Cura/util/profile.py:209
 msgid ""
 "Extra width factor for the extrusion on the first layer, on some printers "
 "it's good to have wider extrusion on the first layer to get better bed "
 "adhesion."
 msgstr ""
 
-#: Cura/util/profile.py:202
+#: Cura/util/profile.py:210
 msgid "Cut off object bottom (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:202
+#: Cura/util/profile.py:210
 msgid ""
 "Sinks the object into the platform, this can be used for objects that do not "
 "have a flat bottom and thus create a too small first layer."
 msgstr ""
 
-#: Cura/util/profile.py:204
+#: Cura/util/profile.py:212
 msgid "Dual extrusion overlap (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:204
+#: Cura/util/profile.py:212
 msgid ""
 "Add a certain amount of overlapping extrusion on dual-extrusion prints. This "
 "bonds the different colors together."
 msgstr ""
 
-#: Cura/util/profile.py:205 Cura/util/profile.py:206 Cura/util/profile.py:207
-#: Cura/util/profile.py:208 Cura/util/profile.py:209
+#: Cura/util/profile.py:213 Cura/util/profile.py:214 Cura/util/profile.py:215
+#: Cura/util/profile.py:216 Cura/util/profile.py:217
 msgid "Speed"
 msgstr ""
 
-#: Cura/util/profile.py:205
+#: Cura/util/profile.py:213
 msgid "Travel speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:205
+#: Cura/util/profile.py:213
 msgid ""
 "Speed at which travel moves are done, a well built Ultimaker can reach "
 "speeds of 250mm/s. But some machines might miss steps then."
 msgstr ""
 
-#: Cura/util/profile.py:206
+#: Cura/util/profile.py:214
 msgid "Bottom layer speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:206
+#: Cura/util/profile.py:214
 msgid ""
 "Print speed for the bottom layer, you want to print the first layer slower "
 "so it sticks better to the printer bed."
 msgstr ""
 
-#: Cura/util/profile.py:207
+#: Cura/util/profile.py:215
 msgid "Infill speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:207
+#: Cura/util/profile.py:215
 msgid ""
 "Speed at which infill parts are printed. If set to 0 then the print speed is "
 "used for the infill. Printing the infill faster can greatly reduce printing "
 "time, but this can negatively affect print quality."
 msgstr ""
 
-#: Cura/util/profile.py:208
+#: Cura/util/profile.py:216
 msgid "Outer shell speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:208
+#: Cura/util/profile.py:216
 msgid ""
 "Speed at which outer shell is printed. If set to 0 then the print speed is "
 "used. Printing the outer shell at a lower speed improves the final skin "
@@ -1938,11 +1943,11 @@ msgid ""
 "and the outer shell speed will effect quality in a negative way."
 msgstr ""
 
-#: Cura/util/profile.py:209
+#: Cura/util/profile.py:217
 msgid "Inner shell speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:209
+#: Cura/util/profile.py:217
 msgid ""
 "Speed at which inner shells are printed. If set to 0 then the print speed is "
 "used. Printing the inner shell faster then the outer shell will reduce "
@@ -1950,17 +1955,17 @@ msgid ""
 "speed and the infill/printing speed."
 msgstr ""
 
-#: Cura/util/profile.py:210 Cura/util/profile.py:211 Cura/util/profile.py:216
-#: Cura/util/profile.py:217 Cura/util/profile.py:218 Cura/util/profile.py:219
-#: Cura/util/profile.py:220
+#: Cura/util/profile.py:218 Cura/util/profile.py:219 Cura/util/profile.py:224
+#: Cura/util/profile.py:225 Cura/util/profile.py:226 Cura/util/profile.py:227
+#: Cura/util/profile.py:228
 msgid "Cool"
 msgstr ""
 
-#: Cura/util/profile.py:210
+#: Cura/util/profile.py:218
 msgid "Minimal layer time (sec)"
 msgstr ""
 
-#: Cura/util/profile.py:210
+#: Cura/util/profile.py:218
 msgid ""
 "Minimum time spent in a layer, gives the layer time to cool down before the "
 "next layer is put on top. If the layer will be placed down too fast the "
@@ -1968,21 +1973,25 @@ msgid ""
 "seconds printing this layer."
 msgstr ""
 
-#: Cura/util/profile.py:211
+#: Cura/util/profile.py:219
 msgid "Enable cooling fan"
 msgstr ""
 
-#: Cura/util/profile.py:211
+#: Cura/util/profile.py:219
 msgid ""
 "Enable the cooling fan during the print. The extra cooling from the cooling "
 "fan is essential during faster prints."
 msgstr ""
 
-#: Cura/util/profile.py:213
+#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
+msgid "Skirt"
+msgstr ""
+
+#: Cura/util/profile.py:221
 msgid "Line count"
 msgstr ""
 
-#: Cura/util/profile.py:213
+#: Cura/util/profile.py:221
 msgid ""
 "The skirt is a line drawn around the object at the first layer. This helps "
 "to prime your extruder, and to see if the object fits on your platform.\n"
@@ -1990,54 +1999,54 @@ msgid ""
 "priming your extruder better for small objects."
 msgstr ""
 
-#: Cura/util/profile.py:214
+#: Cura/util/profile.py:222
 msgid "Start distance (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:214
+#: Cura/util/profile.py:222
 msgid ""
 "The distance between the skirt and the first layer.\n"
 "This is the minimal distance, multiple skirt lines will be put outwards from "
 "this distance."
 msgstr ""
 
-#: Cura/util/profile.py:215
+#: Cura/util/profile.py:223
 msgid "Minimal length (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:215
+#: Cura/util/profile.py:223
 msgid ""
 "The minimal length of the skirt, if this minimal length is not reached it "
 "will add more skirt lines to reach this minimal lenght.\n"
 "Note: If the line count is set to 0 this is ignored."
 msgstr ""
 
-#: Cura/util/profile.py:216
+#: Cura/util/profile.py:224
 msgid "Fan full on at height (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:216
+#: Cura/util/profile.py:224
 msgid ""
 "The height at which the fan is turned on completely. For the layers below "
 "this the fan speed is scaled linearly with the fan off at layer 0."
 msgstr ""
 
-#: Cura/util/profile.py:217
+#: Cura/util/profile.py:225
 msgid "Fan speed min (%)"
 msgstr ""
 
-#: Cura/util/profile.py:217
+#: Cura/util/profile.py:225
 msgid ""
 "When the fan is turned on, it is enabled at this speed setting. If cool "
 "slows down the layer, the fan is adjusted between the min and max speed. "
 "Minimal fan speed is used if the layer is not slowed down due to cooling."
 msgstr ""
 
-#: Cura/util/profile.py:218
+#: Cura/util/profile.py:226
 msgid "Fan speed max (%)"
 msgstr ""
 
-#: Cura/util/profile.py:218
+#: Cura/util/profile.py:226
 msgid ""
 "When the fan is turned on, it is enabled at this speed setting. If cool "
 "slows down the layer, the fan is adjusted between the min and max speed. "
@@ -2045,67 +2054,67 @@ msgid ""
 "than 200%."
 msgstr ""
 
-#: Cura/util/profile.py:219
+#: Cura/util/profile.py:227
 msgid "Minimum speed (mm/s)"
 msgstr ""
 
-#: Cura/util/profile.py:219
+#: Cura/util/profile.py:227
 msgid ""
 "The minimal layer time can cause the print to slow down so much it starts to "
 "ooze. The minimal feedrate protects against this. Even if a print gets "
 "slowed down it will never be slower than this minimal speed."
 msgstr ""
 
-#: Cura/util/profile.py:220
+#: Cura/util/profile.py:228
 msgid "Cool head lift"
 msgstr ""
 
-#: Cura/util/profile.py:220
+#: Cura/util/profile.py:228
 msgid ""
 "Lift the head if the minimal speed is hit because of cool slowdown, and wait "
 "the extra time so the minimal layer time is always hit."
 msgstr ""
 
-#: Cura/util/profile.py:221 Cura/util/profile.py:222 Cura/util/profile.py:223
+#: Cura/util/profile.py:229 Cura/util/profile.py:230 Cura/util/profile.py:231
 msgid "Infill"
 msgstr ""
 
-#: Cura/util/profile.py:221
+#: Cura/util/profile.py:229
 msgid "Solid infill top"
 msgstr ""
 
-#: Cura/util/profile.py:221
+#: Cura/util/profile.py:229
 msgid ""
 "Create a solid top surface, if set to false the top is filled with the fill "
 "percentage. Useful for cups/vases."
 msgstr ""
 
-#: Cura/util/profile.py:222
+#: Cura/util/profile.py:230
 msgid "Solid infill bottom"
 msgstr ""
 
-#: Cura/util/profile.py:222
+#: Cura/util/profile.py:230
 msgid ""
 "Create a solid bottom surface, if set to false the bottom is filled with the "
 "fill percentage. Useful for buildings."
 msgstr ""
 
-#: Cura/util/profile.py:223
+#: Cura/util/profile.py:231
 msgid "Infill overlap (%)"
 msgstr ""
 
-#: Cura/util/profile.py:223
+#: Cura/util/profile.py:231
 msgid ""
 "Amount of overlap between the infill and the walls. There is a slight "
 "overlap with the walls and the infill so the walls connect firmly to the "
 "infill."
 msgstr ""
 
-#: Cura/util/profile.py:224
+#: Cura/util/profile.py:232
 msgid "Structure type"
 msgstr ""
 
-#: Cura/util/profile.py:224
+#: Cura/util/profile.py:232
 msgid ""
 "The type of support structure.\n"
 "Grid is very strong and can come off in 1 piece, however, sometimes it is "
@@ -2115,54 +2124,58 @@ msgid ""
 "prints."
 msgstr ""
 
-#: Cura/util/profile.py:225
+#: Cura/util/profile.py:233
 msgid "Overhang angle for support (deg)"
 msgstr ""
 
-#: Cura/util/profile.py:225
+#: Cura/util/profile.py:233
 msgid ""
-"The minimal angle that overhangs need to have to get support. With 0 degree "
-"being horizontal and 90 degree being vertical."
+"The minimal angle that overhangs need to have to get support. With 90 degree "
+"being horizontal and 0 degree being vertical."
 msgstr ""
 
-#: Cura/util/profile.py:226
+#: Cura/util/profile.py:234
 msgid "Fill amount (%)"
 msgstr ""
 
-#: Cura/util/profile.py:226
+#: Cura/util/profile.py:234
 #, python-format
 msgid ""
 "Amount of infill structure in the support material, less material gives "
 "weaker support which is easier to remove. 15% seems to be a good average."
 msgstr ""
 
-#: Cura/util/profile.py:227
+#: Cura/util/profile.py:235
 msgid "Distance X/Y (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:227
+#: Cura/util/profile.py:235
 msgid ""
 "Distance of the support material from the print, in the X/Y directions.\n"
 "0.7mm gives a nice distance from the print so the support does not stick to "
 "the print."
 msgstr ""
 
-#: Cura/util/profile.py:228
+#: Cura/util/profile.py:236
 msgid "Distance Z (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:228
+#: Cura/util/profile.py:236
 msgid ""
 "Distance from the top/bottom of the support to the print. A small gap here "
 "makes it easier to remove the support but makes the print a bit uglier.\n"
 "0.15mm gives a good seperation of the support material."
 msgstr ""
 
-#: Cura/util/profile.py:229
+#: Cura/util/profile.py:237 Cura/util/profile.py:238
+msgid "Black Magic"
+msgstr ""
+
+#: Cura/util/profile.py:237
 msgid "Spiralize the outer contour"
 msgstr ""
 
-#: Cura/util/profile.py:229
+#: Cura/util/profile.py:237
 msgid ""
 "Spiralize is smoothing out the Z move of the outer edge. This will create a "
 "steady Z increase over the whole print. This feature turns a solid object "
@@ -2170,117 +2183,142 @@ msgid ""
 "This feature used to be called Joris in older versions."
 msgstr ""
 
-#: Cura/util/profile.py:230
+#: Cura/util/profile.py:238
 msgid "Only follow mesh surface"
 msgstr ""
 
-#: Cura/util/profile.py:230
+#: Cura/util/profile.py:238
 msgid ""
 "Only follow the mesh surfaces of the 3D model, do not do anything else. No "
 "infill, no top/bottom, nothing."
 msgstr ""
 
-#: Cura/util/profile.py:232
+#: Cura/util/profile.py:240
 msgid "Brim line amount"
 msgstr ""
 
-#: Cura/util/profile.py:232
+#: Cura/util/profile.py:240
 msgid ""
 "The amount of lines used for a brim, more lines means a larger brim which "
 "sticks better, but this also makes your effective print area smaller."
 msgstr ""
 
-#: Cura/util/profile.py:233
+#: Cura/util/profile.py:241
 msgid "Extra margin (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:233
+#: Cura/util/profile.py:241
 msgid ""
 "If the raft is enabled, this is the extra raft area around the object which "
 "is also rafted. Increasing this margin will create a stronger raft while "
 "using more material and leaving less area for your print."
 msgstr ""
 
-#: Cura/util/profile.py:234
+#: Cura/util/profile.py:242
 msgid "Line spacing (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:234
+#: Cura/util/profile.py:242
 msgid ""
 "When you are using the raft this is the distance between the centerlines of "
 "the raft line."
 msgstr ""
 
-#: Cura/util/profile.py:235
+#: Cura/util/profile.py:243
 msgid "Base thickness (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:235
+#: Cura/util/profile.py:243
 msgid ""
 "When you are using the raft this is the thickness of the base layer which is "
 "put down."
 msgstr ""
 
-#: Cura/util/profile.py:236
+#: Cura/util/profile.py:244
 msgid "Base line width (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:236
+#: Cura/util/profile.py:244
 msgid ""
 "When you are using the raft this is the width of the base layer lines which "
 "are put down."
 msgstr ""
 
-#: Cura/util/profile.py:237
+#: Cura/util/profile.py:245
 msgid "Interface thickness (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:237
+#: Cura/util/profile.py:245
 msgid ""
 "When you are using the raft this is the thickness of the interface layer "
 "which is put down."
 msgstr ""
 
-#: Cura/util/profile.py:238
+#: Cura/util/profile.py:246
 msgid "Interface line width (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:238
+#: Cura/util/profile.py:246
 msgid ""
 "When you are using the raft this is the width of the interface layer lines "
 "which are put down."
 msgstr ""
 
-#: Cura/util/profile.py:239
+#: Cura/util/profile.py:247
 msgid "Airgap"
 msgstr ""
 
-#: Cura/util/profile.py:239
+#: Cura/util/profile.py:247
+msgid "Gap between the last layer of the raft the whole print."
+msgstr ""
+
+#: Cura/util/profile.py:248
+msgid "First Layer Airgap"
+msgstr ""
+
+#: Cura/util/profile.py:248
 msgid ""
 "Gap between the last layer of the raft and the first printing layer. A small "
-"gap of 0.2mm works wonders on PLA and makes the raft easy to remove."
+"gap of 0.2mm works wonders on PLA and makes the raft easy to remove. This "
+"value is added on top of the 'Airgap' setting."
 msgstr ""
 
-#: Cura/util/profile.py:240
+#: Cura/util/profile.py:249
 msgid "Surface layers"
 msgstr ""
 
-#: Cura/util/profile.py:240
+#: Cura/util/profile.py:249
 msgid ""
 "Amount of surface layers put on top of the raft, these are fully filled "
 "layers on which the model is printed."
 msgstr ""
 
-#: Cura/util/profile.py:241 Cura/util/profile.py:242 Cura/util/profile.py:243
-#: Cura/util/profile.py:244
+#: Cura/util/profile.py:250
+msgid "Surface layer thickness (mm)"
+msgstr ""
+
+#: Cura/util/profile.py:250
+msgid "Thickness of each surface layer."
+msgstr ""
+
+#: Cura/util/profile.py:251
+msgid "Surface layer line width (mm)"
+msgstr ""
+
+#: Cura/util/profile.py:251
+msgid "Width of the lines for each surface layer."
+msgstr ""
+
+#: Cura/util/profile.py:252 Cura/util/profile.py:253 Cura/util/profile.py:254
+#: Cura/util/profile.py:255
 msgid "Fix horrible"
 msgstr ""
 
-#: Cura/util/profile.py:241
+#: Cura/util/profile.py:252
 msgid "Combine everything (Type-A)"
 msgstr ""
 
-#: Cura/util/profile.py:241 Cura/util/profile.py:242
+#: Cura/util/profile.py:252 Cura/util/profile.py:253
 msgid ""
 "This expert option adds all parts of the model together. The result is "
 "usually that internal cavities disappear. Depending on the model this can be "
@@ -2289,15 +2327,15 @@ msgid ""
 "Type-B ignores all internal holes and only keeps the outside shape per layer."
 msgstr ""
 
-#: Cura/util/profile.py:242
+#: Cura/util/profile.py:253
 msgid "Combine everything (Type-B)"
 msgstr ""
 
-#: Cura/util/profile.py:243
+#: Cura/util/profile.py:254
 msgid "Keep open faces"
 msgstr ""
 
-#: Cura/util/profile.py:243
+#: Cura/util/profile.py:254
 msgid ""
 "This expert option keeps all the open bits of the model intact. Normally "
 "Cura tries to stitch up small holes and remove everything with big holes, "
@@ -2308,11 +2346,11 @@ msgid ""
 "risk."
 msgstr ""
 
-#: Cura/util/profile.py:244
+#: Cura/util/profile.py:255
 msgid "Extensive stitching"
 msgstr ""
 
-#: Cura/util/profile.py:244
+#: Cura/util/profile.py:255
 msgid ""
 "Extensive stitching tries to fix up open holes in the model by closing the "
 "hole with touching polygons. This algorthm is quite expensive and could "
@@ -2321,159 +2359,159 @@ msgid ""
 "risk."
 msgstr ""
 
-#: Cura/util/profile.py:470
+#: Cura/util/profile.py:481
 msgid "Save profile on slice"
 msgstr ""
 
-#: Cura/util/profile.py:470
+#: Cura/util/profile.py:481
 msgid ""
 "When slicing save the profile as [stl_file]_profile.ini next to the model."
 msgstr ""
 
-#: Cura/util/profile.py:471
+#: Cura/util/profile.py:482
 msgid "Cost (price/kg)"
 msgstr ""
 
-#: Cura/util/profile.py:471
+#: Cura/util/profile.py:482
 msgid "Cost of your filament per kg, to estimate the cost of the final print."
 msgstr ""
 
-#: Cura/util/profile.py:472
+#: Cura/util/profile.py:483
 msgid "Cost (price/m)"
 msgstr ""
 
-#: Cura/util/profile.py:472
+#: Cura/util/profile.py:483
 msgid ""
 "Cost of your filament per meter, to estimate the cost of the final print."
 msgstr ""
 
-#: Cura/util/profile.py:473
+#: Cura/util/profile.py:484
 msgid "Auto detect SD card drive"
 msgstr ""
 
-#: Cura/util/profile.py:473
+#: Cura/util/profile.py:484
 msgid ""
 "Auto detect the SD card. You can disable this because on some systems "
 "external hard-drives or USB sticks are detected as SD card."
 msgstr ""
 
-#: Cura/util/profile.py:474
+#: Cura/util/profile.py:485
 msgid "Check for updates"
 msgstr ""
 
-#: Cura/util/profile.py:474
+#: Cura/util/profile.py:485
 msgid "Check for newer versions of Cura on startup"
 msgstr ""
 
-#: Cura/util/profile.py:475
+#: Cura/util/profile.py:486
 msgid "Send usage statistics"
 msgstr ""
 
-#: Cura/util/profile.py:475
+#: Cura/util/profile.py:486
 msgid "Submit anonymous usage information to improve future versions of Cura"
 msgstr ""
 
-#: Cura/util/profile.py:477
+#: Cura/util/profile.py:488
 msgid "Density (kg/m3)"
 msgstr ""
 
-#: Cura/util/profile.py:477
+#: Cura/util/profile.py:488
 msgid ""
 "Weight of the filament per m3. Around 1240 for PLA. And around 1040 for ABS. "
 "This value is used to estimate the weight if the filament used for the print."
 msgstr ""
 
-#: Cura/util/profile.py:478
+#: Cura/util/profile.py:489
 msgid ""
 "Change the language in which Cura runs. Switching language requires a "
 "restart of Cura"
 msgstr ""
 
-#: Cura/util/profile.py:481
+#: Cura/util/profile.py:492
 msgid "Model colour"
 msgstr ""
 
-#: Cura/util/profile.py:481
+#: Cura/util/profile.py:492
 msgid "Display color for first extruder"
 msgstr ""
 
-#: Cura/util/profile.py:482
+#: Cura/util/profile.py:493
 msgid "Model colour (2)"
 msgstr ""
 
-#: Cura/util/profile.py:482
+#: Cura/util/profile.py:493
 msgid "Display color for second extruder"
 msgstr ""
 
-#: Cura/util/profile.py:483
+#: Cura/util/profile.py:494
 msgid "Model colour (3)"
 msgstr ""
 
-#: Cura/util/profile.py:483
+#: Cura/util/profile.py:494
 msgid "Display color for third extruder"
 msgstr ""
 
-#: Cura/util/profile.py:484
+#: Cura/util/profile.py:495
 msgid "Model colour (4)"
 msgstr ""
 
-#: Cura/util/profile.py:484
+#: Cura/util/profile.py:495
 msgid "Display color for forth extruder"
 msgstr ""
 
-#: Cura/util/profile.py:485
+#: Cura/util/profile.py:496
 msgid "Printing window type"
 msgstr ""
 
-#: Cura/util/profile.py:485
+#: Cura/util/profile.py:496
 msgid "Select the interface used for USB printing."
 msgstr ""
 
-#: Cura/util/profile.py:497
+#: Cura/util/profile.py:508
 msgid "Maximum width (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:497 Cura/util/profile.py:498 Cura/util/profile.py:499
+#: Cura/util/profile.py:508 Cura/util/profile.py:509 Cura/util/profile.py:510
 msgid "Size of the machine in mm"
 msgstr ""
 
-#: Cura/util/profile.py:498
+#: Cura/util/profile.py:509
 msgid "Maximum depth (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:499
+#: Cura/util/profile.py:510
 msgid "Maximum height (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:500
+#: Cura/util/profile.py:511
 msgid "Machine center 0,0"
 msgstr ""
 
-#: Cura/util/profile.py:500
+#: Cura/util/profile.py:511
 msgid ""
 "Machines firmware defines the center of the bed as 0,0 instead of the front "
 "left corner."
 msgstr ""
 
-#: Cura/util/profile.py:501
+#: Cura/util/profile.py:512
 msgid "Build area shape"
 msgstr ""
 
-#: Cura/util/profile.py:501
+#: Cura/util/profile.py:512
 msgid "The shape of machine build area."
 msgstr ""
 
-#: Cura/util/profile.py:503
+#: Cura/util/profile.py:514
 msgid ""
 "If you have an heated bed, this enabled heated bed settings (requires "
 "restart)"
 msgstr ""
 
-#: Cura/util/profile.py:504
+#: Cura/util/profile.py:515
 msgid "GCode Flavor"
 msgstr ""
 
-#: Cura/util/profile.py:504
+#: Cura/util/profile.py:515
 msgid ""
 "Flavor of generated GCode.\n"
 "RepRap is normal 5D GCode which works on Marlin/Sprinter based firmwares.\n"
@@ -2485,175 +2523,175 @@ msgid ""
 "Mach3 uses A,B,C instead of E for extruders."
 msgstr ""
 
-#: Cura/util/profile.py:505
+#: Cura/util/profile.py:516
 msgid "Extruder count"
 msgstr ""
 
-#: Cura/util/profile.py:505
+#: Cura/util/profile.py:516
 msgid "Amount of extruders in your machine."
 msgstr ""
 
-#: Cura/util/profile.py:506 Cura/util/profile.py:508 Cura/util/profile.py:510
+#: Cura/util/profile.py:517 Cura/util/profile.py:519 Cura/util/profile.py:521
 msgid "Offset X"
 msgstr ""
 
-#: Cura/util/profile.py:506 Cura/util/profile.py:507
+#: Cura/util/profile.py:517 Cura/util/profile.py:518
 msgid "The offset of your secondary extruder compared to the primary."
 msgstr ""
 
-#: Cura/util/profile.py:507 Cura/util/profile.py:509 Cura/util/profile.py:511
+#: Cura/util/profile.py:518 Cura/util/profile.py:520 Cura/util/profile.py:522
 msgid "Offset Y"
 msgstr ""
 
-#: Cura/util/profile.py:508 Cura/util/profile.py:509
+#: Cura/util/profile.py:519 Cura/util/profile.py:520
 msgid "The offset of your tertiary extruder compared to the primary."
 msgstr ""
 
-#: Cura/util/profile.py:510 Cura/util/profile.py:511
+#: Cura/util/profile.py:521 Cura/util/profile.py:522
 msgid "The offset of your forth extruder compared to the primary."
 msgstr ""
 
-#: Cura/util/profile.py:512
+#: Cura/util/profile.py:523
 msgid "E-Steps per 1mm filament"
 msgstr ""
 
-#: Cura/util/profile.py:512
+#: Cura/util/profile.py:523
 msgid ""
 "Amount of steps per mm filament extrusion. If set to 0 then this value is "
 "ignored and the value in your firmware is used."
 msgstr ""
 
-#: Cura/util/profile.py:513
+#: Cura/util/profile.py:524
 msgid "Serial port"
 msgstr ""
 
-#: Cura/util/profile.py:513
+#: Cura/util/profile.py:524
 msgid "Serial port to use for communication with the printer"
 msgstr ""
 
-#: Cura/util/profile.py:515
+#: Cura/util/profile.py:526
 msgid "Baudrate"
 msgstr ""
 
-#: Cura/util/profile.py:515
+#: Cura/util/profile.py:526
 msgid ""
 "Speed of the serial port communication\n"
 "Needs to match your firmware settings\n"
 "Common values are 250000, 115200, 57600"
 msgstr ""
 
-#: Cura/util/profile.py:518
+#: Cura/util/profile.py:529
 msgid "Head size towards X min (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:518
+#: Cura/util/profile.py:529
 msgid ""
 "The head size when printing multiple objects, measured from the tip of the "
 "nozzle towards the outer part of the head. 75mm for an Ultimaker if the fan "
 "is on the left side."
 msgstr ""
 
-#: Cura/util/profile.py:519
+#: Cura/util/profile.py:530
 msgid "Head size towards Y min (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:519 Cura/util/profile.py:520
+#: Cura/util/profile.py:530 Cura/util/profile.py:531
 msgid ""
 "The head size when printing multiple objects, measured from the tip of the "
 "nozzle towards the outer part of the head. 18mm for an Ultimaker if the fan "
 "is on the left side."
 msgstr ""
 
-#: Cura/util/profile.py:520
+#: Cura/util/profile.py:531
 msgid "Head size towards X max (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:521
+#: Cura/util/profile.py:532
 msgid "Head size towards Y max (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:521
+#: Cura/util/profile.py:532
 msgid ""
 "The head size when printing multiple objects, measured from the tip of the "
 "nozzle towards the outer part of the head. 35mm for an Ultimaker if the fan "
 "is on the left side."
 msgstr ""
 
-#: Cura/util/profile.py:522
+#: Cura/util/profile.py:533
 msgid "Printer gantry height (mm)"
 msgstr ""
 
-#: Cura/util/profile.py:522
+#: Cura/util/profile.py:533
 msgid ""
 "The height of the gantry holding up the printer head. If an object is higher "
 "then this then you cannot print multiple objects one for one. 60mm for an "
 "Ultimaker."
 msgstr ""
 
-#: Cura/util/profile.py:524
+#: Cura/util/profile.py:535
 #, python-format
 msgid "More flow than 150% is rare and usually not recommended."
 msgstr ""
 
-#: Cura/util/profile.py:525
+#: Cura/util/profile.py:536
 #, python-format
 msgid "Less flow than 50% is rare and usually not recommended."
 msgstr ""
 
-#: Cura/util/profile.py:526
+#: Cura/util/profile.py:537
 #, python-format
 msgid ""
 "Thicker layers then %.2fmm (80%% nozzle size) usually give bad results and "
 "are not recommended."
 msgstr ""
 
-#: Cura/util/profile.py:528
+#: Cura/util/profile.py:539
 msgid ""
 "It is highly unlikely that your machine can achieve a printing speed above "
 "150mm/s"
 msgstr ""
 
-#: Cura/util/profile.py:530 Cura/util/profile.py:531 Cura/util/profile.py:532
-#: Cura/util/profile.py:533
+#: Cura/util/profile.py:541 Cura/util/profile.py:542 Cura/util/profile.py:543
+#: Cura/util/profile.py:544
 msgid "Temperatures above 260C could damage your machine, be careful!"
 msgstr ""
 
-#: Cura/util/profile.py:534 Cura/util/profile.py:535 Cura/util/profile.py:536
-#: Cura/util/profile.py:537
+#: Cura/util/profile.py:545 Cura/util/profile.py:546 Cura/util/profile.py:547
+#: Cura/util/profile.py:548
 msgid ""
 "Are you sure your filament is that thick? Normal filament is around 3mm or "
 "1.75mm."
 msgstr ""
 
-#: Cura/util/profile.py:538
+#: Cura/util/profile.py:549
 msgid ""
 "It is highly unlikely that your machine can achieve a travel speed above "
 "300mm/s"
 msgstr ""
 
-#: Cura/util/profile.py:539
+#: Cura/util/profile.py:550
 #, python-format
 msgid ""
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "
 "results and is not recommended."
 msgstr ""
 
-#: Cura/util/sliceEngine.py:92
+#: Cura/util/sliceEngine.py:93
 #, python-format
 msgid "%d minutes"
 msgstr ""
 
-#: Cura/util/sliceEngine.py:94
+#: Cura/util/sliceEngine.py:95
 #, python-format
 msgid "%d hour %d minutes"
 msgstr ""
 
-#: Cura/util/sliceEngine.py:95
+#: Cura/util/sliceEngine.py:96
 #, python-format
 msgid "%d hours %d minutes"
 msgstr ""
 
-#: Cura/util/sliceEngine.py:100
+#: Cura/util/sliceEngine.py:101
 #, python-format
 msgid "%0.2f meter %0.0f gram"
 msgstr ""