X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=poster-tube-lid.scad;h=d0986c97801ba32b58a3ea815b10a3f45fc097cb;hb=8ceea8f9acc75b2de6a7fe879f5b3701cb5ecf2b;hp=69df5a0d19ff0b06a1abd4a7ef4436505adc60ed;hpb=ca83052082cc825f6bd4f12e42de9ebd18a9f597;p=reprap-play.git

diff --git a/poster-tube-lid.scad b/poster-tube-lid.scad
index 69df5a0..d0986c9 100644
--- a/poster-tube-lid.scad
+++ b/poster-tube-lid.scad
@@ -9,6 +9,8 @@ top_middle_dr = 11;
 
 main_cnr = 6.0;
 
+min_wall = 4;
+
 rivet_posn = 6.0;
 rivet_thick = 1.67;
 rivet_width = 4.15 + 1.0;
@@ -28,7 +30,7 @@ oring_bore = 62.0;
 oring_upper_embed_angle = 80;
 oring_compress = 0.05; // proportion
 
-oring_rm_beside = 5;
+oring_rm_beside = 8;
 oring_rm_scale = 2.0;
 oring_rm_angle = 20;
 
@@ -81,6 +83,8 @@ rivet_entry_width = rivet_width + side_rivet_gap;
 
 jig_mark_rad = jig_mark + main_dia/2 + jig_thick;
 
+handling_dia = oring_bore + oring_thick*2 + min_wall*2;
+
 $fs= coarse ? 2.5 : 0.5;
 $fa= coarse ? 5 : 1;
 
@@ -159,6 +163,10 @@ module MainProfile(){
   }
 }
 
+module HandlingProfile(){
+//  translate([
+}
+
 module RotateProjectSlice(offset, slice_size, nom_rad, real_rad){
   // nom_rad > real_rad
   rotate([0,0, atan2(offset, nom_rad) ]){
@@ -192,6 +200,7 @@ module BayonetCutout(){
   RotateProject(bayo_c[0], bayo_i[0], bayo_slice_size,
 		main_dia/2 + side_thick, 
 		main_dia/2 + rivet_tall)
+    translate([-0.5 * (bayo_a[0] + bayo_d[0]), 0])
     polygon(bayo_polygon, convexity=10);
 }
 
@@ -200,20 +209,37 @@ module ProfilesDemo(){ ////toplevel
   translate([+10,0]) polygon(bayo_polygon, convexity=10);
 }
 
+module LimitForHandling(){ ////toplevel
+  for (r=[0,180])
+    rotate([0,0,r]) {
+      
+    }
+  hull() rotate_extrude(){
+    translate([ handling_dia/2 - main_cnr, top_z - main_cnr ]) {
+      circle(r = main_cnr);
+      mirror([0,1]) square([ main_cnr, 50 ]);
+    }
+  }
+  //cylinder(r= handling_dia/2, h=20);
+}
+
 module Cover(){ ////toplevel
   render() difference(){
-    union(){
-      rotate_extrude(convexity=10)
-	translate([main_dia/2, 0])
-	MainProfile();
-      translate([0,0, middle_bot_z])
-	cylinder(h= top_thick_middle, r = main_dia/2 - top_middle_dr + 1);
+    intersection(){
+      union(){
+	rotate_extrude(convexity=10)
+	  translate([main_dia/2, 0])
+	  MainProfile();
+	translate([0,0, middle_bot_z])
+	  cylinder(h= top_thick_middle, r = main_dia/2 - top_middle_dr + 1);
+      }
+      %LimitForHandling();
     }
     for (r=[0,180]){
       rotate([0,0, r])
 	translate([0,0, -side_height])
 	BayonetCutout();
-      rotate([0,0, r + asin((bayo_d[0] - oring_rm_beside) / (main_dia/2))])
+      rotate([0,0, r + asin((-oring_rm_beside) / (main_dia/2))])
 	translate([0,
 		   oring_mid_dia/2 + oring_thick/4 * oring_rm_scale,
 		   oring_y_rad * 1.5])