X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.unit.xml;h=d38a00136651b552ba94b4c513e643a5654f3a2f;hb=4f755fc6ab8b75f89ed84c93cd5c3fac2a448b16;hp=c3c9561f2fb1412a43a11dd6454969f9696ce36d;hpb=b9aea9547a5398685c28288b7dabfede55e0a39b;p=elogind.git
diff --git a/man/systemd.unit.xml b/man/systemd.unit.xml
index c3c9561f2..d38a00136 100644
--- a/man/systemd.unit.xml
+++ b/man/systemd.unit.xml
@@ -139,7 +139,10 @@
with the enable command of the
systemctl1
tool which reads information from the [Install]
- section of unit files. (See below.)
+ section of unit files. (See below.) A similar
+ functionality exists for Requires=
+ type dependencies as well, the directory suffix is
+ .requires/ in this case.
Note that while systemd offers a flexible
dependency system between units it is recommended to
@@ -182,13 +185,33 @@
%i specifier in many of the
configuration options. Other specifiers that may be
used are %n, %N,
- %p, %P and
- %I, for the full unit name, the
- unescaped unit name, the prefix name, the unescaped
- prefix name and the unescaped instance name,
- respectively. The prefix name here refers to the
- string before the @, i.e. "getty" in the example
- above, where "tty3" is the instance name.
+ %p, %P,
+ %I, %f,
+ %c, %r,
+ %R and %t for
+ the full unit name, the unescaped unit name, the
+ prefix name, the unescaped prefix name, the unescaped
+ instance name, the unescaped filename, the control
+ group path of the unit, the root control group path of
+ systemd, and the parent directory of the root control
+ cgroup path of systemd and the runtime socket dir,
+ respectively. The unescaped filename is either the
+ unescaped instance name (if set) with / prepended (if
+ necessary), or the prefix name similarly prepended
+ with /. The prefix name here refers to the string
+ before the @, i.e. "getty" in the example above, where
+ "tty3" is the instance name. The runtime socket
+ directory is either /run (for the
+ system manager) or $XDG_RUNTIME_DIR
+ (for user managers).
+
+ If a unit file is empty (i.e. has the file size
+ 0) or is symlinked to /dev/null
+ its configuration will not be loaded and it appears
+ with a load state of masked, and
+ cannot be activated. Use this as an effective way to
+ fully disable a unit, making it impossible to start it
+ even manually.The unit file format is covered by the
-
- Names=
-
- Additional names for
- this unit. The names listed here must
- have the same suffix (i.e. type) as
- the unit file name. This option may be
- specified more than once, in which
- case all listed names are used. Note
- that this option is different from the
- Alias= option from
- the [Install] section mentioned
- below. See below for details.
-
- Description=
@@ -269,7 +277,6 @@
services.
-
RequiresOverridable=
@@ -328,6 +335,23 @@
details see above.
+
+ BindTo=
+
+ Configures requirement
+ dependencies, very similar in style to
+ Requires=, however
+ in addition to this behaviour it also
+ declares that this unit is stopped
+ when any of the units listed suddenly
+ disappears. Units can suddenly,
+ unexpectedly disappear if a service
+ terminates on its own choice, a device
+ is unplugged or a mount point
+ unmounted without involvement of
+ systemd.
+
+
Conflicts=
@@ -429,25 +453,43 @@
- RecursiveStop=
+ OnFailureIsolate=
+
+ Takes a boolean
+ argument. If the
+ unit listed in
+ OnFailure= will be
+ enqueued in isolation mode, i.e. all
+ units that are not its dependency will
+ be stopped. If this is set only a
+ single unit may be listed in
+ OnFailure=. Defaults
+ to
+ .
+
+
+
+ IgnoreOnIsolate=Takes a boolean
- argument. If and
- the unit stops without being requested
- by the user, all units
- depending on it will be stopped as
- well. (e.g. if a service exits or
- crashes on its own behalf, units using
- it will be stopped) Note that normally
- if a unit stops without a user request,
- units depending on it will not be
- terminated. Only if the user requested
- shutdown of a unit, all units depending
- on that unit will be shut down as well
- and at the same time. Defaults to
+ argument. If
+ this unit will not be stopped when
+ isolating another unit. Defaults to
.
+
+ IgnoreOnSnapshot=
+
+ Takes a boolean
+ argument. If
+ this unit will not be included in
+ snapshots. Defaults to
+ for device and
+ snapshot units,
+ for the others.
+
+
StopWhenUnneeded=
@@ -535,20 +577,6 @@
ones.
-
- IgnoreDependencyFailure=
-
- Takes a boolean
- argument. If and
- a requirement dependency of this unit
- fails to start up this unit will be
- started nonetheless, ignoring that
- failure. If
- (the default) and a dependency unit
- fails the unit will immediately fail
- too and the job is removed.
-
-
JobTimeoutSec=
@@ -577,6 +605,149 @@
change.
+
+ ConditionPathExists=
+ ConditionPathExistsGlob=
+ ConditionPathIsDirectory=
+ ConditionDirectoryNotEmpty=
+ ConditionFileIsExecutable=
+ ConditionKernelCommandLine=
+ ConditionVirtualization=
+ ConditionSecurity=
+ ConditionNull=
+
+ Before starting a unit
+ verify that the specified condition is
+ true. With
+ ConditionPathExists=
+ a file existence condition can be
+ checked before a unit is started. If
+ the specified absolute path name does
+ not exist startup of a unit will not
+ actually happen, however the unit is
+ still useful for ordering purposes in
+ this case. The condition is checked at
+ the time the queued start job is to be
+ executed. If the absolute path name
+ passed to
+ ConditionPathExists=
+ is prefixed with an exclamation mark
+ (!), the test is negated, and the unit
+ only started if the path does not
+ exist. ConditionPathExistsGlob=
+ work in a similar way, but checks for
+ the existance of at least one file or
+ directory matching the specified
+ globbing
+ pattern. ConditionPathIsDirectory=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a
+ directory. ConditionFileIsExecutable=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists, is a regular file and marked
+ executable.
+ ConditionDirectoryNotEmpty=
+ is similar to
+ ConditionPathExists=
+ but verifies whether a certain path
+ exists and is a non-empty
+ directory. Similarly
+ ConditionKernelCommandLine=
+ may be used to check whether a
+ specific kernel command line option is
+ set (or if prefixed with the
+ exclamation mark unset). The argument
+ must either be a single word, or an
+ assignment (i.e. two words, separated
+ by the equality sign). In the former
+ case the kernel command line is
+ searched for the word appearing as is,
+ or as left hand side of an
+ assignment. In the latter case the
+ exact assignment is looked for with
+ right and left hand side
+ matching. ConditionVirtualization=
+ may be used to check whether the
+ system is executed in a virtualized
+ environment and optionally test
+ whether it is a specific
+ implementation. Takes either boolean
+ value to check if being executed in
+ any virtual environment or one of the
+ qemu,
+ kvm,
+ vmware,
+ microsoft,
+ oracle,
+ xen,
+ pidns,
+ openvz to test
+ against a specific implementation. The
+ test may be negated by prepending an
+ exclamation mark.
+ ConditionSecurity=
+ may be used to check whether the given
+ security module is enabled on the
+ system. Currently the only recognized
+ value is selinux.
+ The test may be negated by prepending
+ an exclamation mark. Finally,
+ ConditionNull= may
+ be used to add a constant condition
+ check value to the unit. It takes a
+ boolean argument. If set to
+ false the condition
+ will always fail, otherwise
+ succeed. If multiple conditions are
+ specified the unit will be executed if
+ all of them apply (i.e. a logical AND
+ is applied). Condition checks can be
+ prefixed with a pipe symbol (|) in
+ which case a condition becomes a
+ triggering condition. If at least one
+ triggering condition is defined for a
+ unit then the unit will be executed if
+ at least one of the triggering
+ conditions apply and all of the
+ non-triggering conditions. If you
+ prefix an argument with the pipe
+ symbol and an exclamation mark the
+ pipe symbol must be passed first, the
+ exclamation second.
+
+
+
+ Names=
+
+ Additional names for
+ this unit. The names listed here must
+ have the same suffix (i.e. type) as
+ the unit file name. This option may be
+ specified more than once, in which
+ case all listed names are used. Note
+ that this option is different from the
+ Alias= option from
+ the [Install] section mentioned
+ below. See below for details. Note
+ that in almost all cases this option
+ is not what you want. A symlink alias
+ in the file system is generally
+ preferable since it can be used as
+ lookup key. If a unit with a symlinked
+ alias name is not loaded and needs to
+ be it is easily found via the
+ symlink. However, if a unit with an
+ alias name configured with this
+ setting is not loaded it will not be
+ discovered. This settings' only use is
+ in conjunction with service
+ instances.
+
+ Unit file may include a [Install] section, which