X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.socket.xml;h=852010bfaaec23ec52619688d4bf7f263bae0e69;hb=f7f74d8ec46532f13a1dc418d550eaf76b339fa3;hp=e25b5a00fda1096d3081cc86daf74fb8f6428876;hpb=b439c6ee04967fa988d232e0765f972cb27b1877;p=elogind.git
diff --git a/man/systemd.socket.xml b/man/systemd.socket.xml
index e25b5a00f..852010bfa 100644
--- a/man/systemd.socket.xml
+++ b/man/systemd.socket.xml
@@ -9,16 +9,16 @@
Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see .
-->
@@ -44,18 +44,18 @@
systemd.socket
- systemd socket configuration files
+ Socket unit configuration
- systemd.socket
+ socket.socketDescriptionA unit configuration file whose name ends in
- .socket encodes information about
+ .socket encodes information about
an IPC or network socket or a file system FIFO
controlled and supervised by systemd, for socket-based
activation.
@@ -70,7 +70,19 @@
in the [Socket] section.
Additional options are listed in
- systemd.exec5.
+ systemd.exec5,
+ which define the execution environment the
+ ,
+ ,
+ and
+ commands are executed
+ in, and in
+ systemd.kill5,
+ which define the way the processes are
+ terminated, and in
+ systemd.cgroup5,
+ which configure control group settings for the
+ processes of the service.
For each socket file a matching service file
(see
@@ -89,9 +101,35 @@
which services are instantiated for each incoming
connection.
+ Unless DefaultDependencies=
+ is set to , socket units will
+ implicitly have dependencies of type
+ Requires= and
+ After= on
+ sysinit.target as well as
+ dependencies of type Conflicts= and
+ Before= on
+ shutdown.target. These ensure
+ that socket units pull in basic system
+ initialization, and are terminated cleanly prior to
+ system shutdown. Only sockets involved with early
+ boot or late system shutdown should disable this
+ option.
+
Socket units may be used to implement on-demand
starting of services, as well as parallelized starting
of services.
+
+ Note that the daemon software configured for
+ socket activation with socket units needs to be able
+ to accept sockets from systemd, either via systemd's
+ native socket passing interface (see
+ sd_listen_fds3
+ for details) or via the traditional
+ inetd8-style
+ socket passing (i.e. sockets passed in via STDIN and
+ STDOUT, using StandardInput=socket
+ in the service file).
@@ -102,39 +140,48 @@
supervises. A number of options that may be used in
this section are shared with other unit types. These
options are documented in
- systemd.exec5. The
+ systemd.exec5
+ and
+ systemd.kill5. The
options specific to the [Socket] section of socket
units are the following:
-
+ ListenStream=ListenDatagram=ListenSequentialPacket=Specifies an address
to listen on for a stream
- (SOCK_STREAM), datagram (SOCK_DGRAM)
- resp. sequential packet
- (SOCK_SEQPACKET) socket. The address
+ (SOCK_STREAM), datagram (SOCK_DGRAM),
+ or sequential packet
+ (SOCK_SEQPACKET) socket, respectively. The address
can be written in various formats:If the address starts with a
- slash (/), it is read as file system
- socket in the AF_UNIX socket
+ slash (/), it is read as file system
+ socket in the AF_UNIX socket
family.
- If the address starts with an
- ampersand (@) it is read as abstract
- namespace socket in the AF_UNIX
- family. The @ is replaced with a NUL
- character before binding. For details
- see
+ If the address starts with an at
+ symbol (@) it is read as abstract
+ namespace socket in the
+ AF_UNIX
+ family. The @ is
+ replaced with a
+ NUL character
+ before binding. For details see
unix7.If the address string is a
single number it is read as port
- number to listen on for both IPv4 and
- IPv6.
+ number to listen on via
+ IPv6. Depending on the value of
+ BindIPv6Only= (see below) this
+ might result in the service being
+ available via both IPv6 and IPv4 (default) or
+ just via IPv6.
+ If the address string is a
string in the format v.w.x.y:z it is
@@ -144,33 +191,43 @@
If the address string is a
string in the format [x]:y it is read
- as IPv6 address x on a port y.
-
- Note that SOCK_SEQPACKET
+ as IPv6 address x on a port y. Note
+ that this might make the service
+ available via IPv4, too, depending on
+ the BindIPv6Only=
+ setting (see below).
+
+
+ Note that SOCK_SEQPACKET
(i.e. ListenSequentialPacket=)
- is only available for AF_UNIX
- sockets. SOCK_STREAM
+ is only available for AF_UNIX
+ sockets. SOCK_STREAM
(i.e. ListenStream=)
when used for IP sockets refers to TCP
- sockets, SOCK_DGRAM
+ sockets, SOCK_DGRAM
(i.e. ListenDatagram=)
to UDP.These options may be specified
more than once in which case incoming
- traffic on any of the sockets will trigger
- service activation, and all listed
- sockets will be passed to the service,
- regardless whether there is incoming
- traffic on them or not.
-
- If an IP address is used here, it
- is often desirable to listen on it
+ traffic on any of the sockets will
+ trigger service activation, and all
+ listed sockets will be passed to the
+ service, regardless whether there is
+ incoming traffic on them or not. If
+ the empty string is assigned to any of
+ these options, the list of addresses
+ to listen on is reset, all prior uses
+ of any of these options will have no
+ effect.
+
+ If an IP address is used here,
+ it is often desirable to listen on it
before the interface it is configured
on is up and running, and even
regardless whether it will be up and
- running ever at all. To deal with this it is
- recommended to set the
+ running ever at all. To deal with this
+ it is recommended to set the
FreeBind= option
described below.
@@ -180,12 +237,57 @@
Specifies a file
system FIFO to listen on. This expects
an absolute file system path as
- argument. Behaviour otherwise is very
+ argument. Behavior otherwise is very
similar to the
ListenDatagram=
directive above.
+
+ ListenSpecial=
+ Specifies a special
+ file in the file system to listen
+ on. This expects an absolute file
+ system path as argument. Behavior
+ otherwise is very similar to the
+ ListenFIFO=
+ directive above. Use this to open
+ character device nodes as well as
+ special files in
+ /proc and
+ /sys.
+
+
+
+ ListenNetlink=
+ Specifies a Netlink
+ family to create a socket for to
+ listen on. This expects a short string
+ referring to the AF_NETLINK family
+ name (such as audit
+ or kobject-uevent)
+ as argument, optionally suffixed by a
+ whitespace followed by a multicast
+ group integer. Behavior otherwise is
+ very similar to the
+ ListenDatagram=
+ directive above.
+
+
+
+ ListenMessageQueue=
+ Specifies a POSIX
+ message queue name to listen on. This
+ expects a valid message queue name
+ (i.e. beginning with /). Behavior
+ otherwise is very similar to the
+ ListenFIFO=
+ directive above. On Linux message
+ queue descriptors are actually file
+ descriptors and can be inherited
+ between processes.
+
+
BindIPv6Only=Takes a one of
@@ -204,7 +306,10 @@
default, surprise!) the system wide
default setting is used, as controlled
by
- /proc/sys/net/ipv6/bindv6only.
+ /proc/sys/net/ipv6/bindv6only,
+ which in turn defaults to the
+ equivalent of
+ .
@@ -241,21 +346,24 @@
DirectoryMode=If listening on a file
- system socket of FIFO, the parent
+ system socket or FIFO, the parent
directories are automatically created
if needed. This option specifies the
file system access mode used when
- creating these directories. Defaults
- to 0755.
+ creating these directories. Takes an
+ access mode in octal
+ notation. Defaults to
+ 0755.
SocketMode=If listening on a file
- system socket of FIFO, this option
+ system socket or FIFO, this option
specifies the file system access mode
used when creating the file
- node. Defaults to
+ node. Takes an access mode in octal
+ notation. Defaults to
0666.
@@ -271,17 +379,30 @@
and only one service unit is spawned
for all connections (also see
above). This value is ignored for
- datagram sockets and FIFOs where
- a single service unit unconditionally
+ datagram sockets and FIFOs where a
+ single service unit unconditionally
handles all incoming traffic. Defaults
to . For
performance reasons, it is recommended
to write new daemons only in a way
that is suitable for
- . This
- option is mostly useful to allow
- daemons designed for usage with
- inetd8,
+ . A
+ daemon listening on an AF_UNIX socket
+ may, but does not need to, call
+ close2
+ on the received socket before
+ exiting. However, it must not unlink
+ the socket from a file system. It
+ should not invoke
+ shutdown2
+ on sockets it got with
+ Accept=false, but
+ it may do so for sockets it got with
+ Accept=true set.
+ Setting Accept=true
+ is mostly useful to allow daemons
+ designed for usage with
+ inetd8
to work unmodified with systemd socket
activation.
@@ -296,8 +417,8 @@
are coming in, they will be refused
until at least one existing connection
is terminated. This setting has no
- effect for sockets configured with
- or datagram
+ effect on sockets configured with
+ or datagram
sockets. Defaults to
64.
@@ -336,9 +457,9 @@
SendBuffer=Takes an integer
argument controlling the receive
- resp. send buffer sizes of this
- socket. This controls the SO_RCVBUF
- resp. SO_SNDBUF socket options (see
+ or send buffer sizes of this
+ socket, respectively. This controls the SO_RCVBUF
+ and SO_SNDBUF socket options (see
socket7
for details.).
@@ -386,16 +507,60 @@
for details.
+
+ ReusePort=
+ Takes a boolean
+ value. If true, allows multiple bind()s
+ to this TCP or UDP port. This
+ controls the SO_REUSEPORT socket
+ option. See
+ socket7
+ for details.
+
+
+
+ SmackLabel=
+ SmackLabelIPIn=
+ SmackLabelIPOut=
+ Takes a string
+ value. Controls the extended
+ attributes
+ security.SMACK64,
+ security.SMACK64IPIN
+ and
+ security.SMACK64IPOUT,
+ respectively, i.e. the security label
+ of the FIFO, or the security label for
+ the incoming or outgoing connections
+ of the socket, respectively. See
+ Smack.txt
+ for details.
+
+
PipeSize=Takes an integer
value. Controls the pipe buffer size
of FIFOs configured in this socket
- unit. See
+ unit. See
fcntl2
for details.
+
+ MessageQueueMaxMessages=,
+ MessageQueueMessageSize=
+ These two settings
+ take integer values and control the
+ mq_maxmsg field or the mq_msgsize field, respectively, when
+ creating the message queue. Note that
+ either none or both of these variables
+ need to be set. See
+ mq_setattr3
+ for details.
+
+
FreeBind=Takes a boolean
@@ -413,31 +578,86 @@
address. Defaults to .
+
+ Transparent=
+ Takes a boolean
+ value. Controls the IP_TRANSPARENT
+ socket option. Defaults to
+ .
+
+
+
+ Broadcast=
+ Takes a boolean
+ value. This controls the SO_BROADCAST
+ socket option, which allows broadcast
+ datagrams to be sent from this
+ socket. Defaults to
+ .
+
+
+
+ PassCredentials=
+ Takes a boolean
+ value. This controls the SO_PASSCRED
+ socket option, which allows AF_UNIX sockets to
+ receive the credentials of the sending
+ process in an ancillary message.
+ Defaults to
+ .
+
+
+
+ PassSecurity=
+ Takes a boolean
+ value. This controls the SO_PASSSEC
+ socket option, which allows AF_UNIX
+ sockets to receive the security
+ context of the sending process in an
+ ancillary message. Defaults to
+ .
+
+
+
+ TCPCongestion=
+ Takes a string
+ value. Controls the TCP congestion
+ algorithm used by this socket. Should
+ be one of "westwood", "veno", "cubic",
+ "lp" or any other available algorithm
+ supported by the IP stack. This
+ setting applies only to stream
+ sockets.
+
+
ExecStartPre=ExecStartPost=
- Takes a command line,
- which is executed before (resp. after)
- the listening sockets/FIFOs are created and
- bound. The first token of the command
- line must be an absolute file name,
+ Takes one or more
+ command lines, which are executed
+ before or after the listening
+ sockets/FIFOs are created and
+ bound, respectively. The first token of the command
+ line must be an absolute filename,
then followed by arguments for the
- process. If specified more than once,
- all commands are executed one after
- the other, fully serialized. The use of
- these settings is optional.
+ process. Multiple command lines may be
+ specified following the same scheme as
+ used for
+ ExecStartPre= of
+ service unit files.ExecStopPre=ExecStopPost=Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the listening sockets/FIFOs are closed
- and removed. If specified more than
- once, all commands are executed one
- after the other, fully serialized. The use of
- these settings is optional.
+ and removed, respectively. Multiple command lines
+ may be specified following the same
+ scheme as used for
+ ExecStartPre= of
+ service unit files.
@@ -453,43 +673,56 @@
will be considered failed and be shut
down again. All commands still running,
will be terminated forcibly via
- SIGTERM, and after another delay of
- this time with SIGKILL. (See
- below.)
+ SIGTERM, and after another delay of
+ this time with SIGKILL. (See
+ in systemd.kill5.)
Takes a unit-less value in seconds, or
a time span value such as "5min
20s". Pass 0 to disable the timeout
logic. Defaults to
- 60s.
+ 90s.
- KillMode=
- Specifies how
- processes of this socket unit shall be
- killed. One of
- ,
- ,
- ,
- .
-
- This option is mostly equivalent
- to the
- option of service files. See
- systemd.service5
- for details.
+ Service=
+ Specifies the service
+ unit name to activate on incoming
+ traffic. This defaults to the service
+ that bears the same name as the socket
+ (ignoring the different suffixes). In
+ most cases it should not be necessary
+ to use this option.
+
+
+ Check
+ systemd.exec5
+ and
+ systemd.kill5
+ for more settings.
+
See Also
- systemd8,
+ systemd1,
systemctl8,
systemd.unit5,
systemd.exec5,
- systemd.service5
+ systemd.kill5,
+ systemd.cgroup5,
+ systemd.service5,
+ systemd.directives7
+
+
+
+ For more extensive descriptions see the "systemd for Developers" series:
+ Socket Activation,
+ Socket Activation, part II,
+ Converting inetd Services,
+ Socket Activated Internet Services and OS Containers.