X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.service.xml;h=a82dfb2c86496c11eb14f702ec0ece5c7f16b62a;hb=8e3ba3772cadf6a8292b0da533062dd4d377af67;hp=d2feb98247ba53b92d038fb00873c1ab9fcfac6e;hpb=ccc9a4f9ffdab069b0b785627c48962fdadf6d46;p=elogind.git
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index d2feb9824..a82dfb2c8 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -48,7 +48,7 @@
- systemd.service
+ service.service
@@ -73,9 +73,12 @@
systemd.exec5,
which define the execution environment the commands
are executed in, and in
- systemd.kill5
+ systemd.kill5,
which define the way the processes of the service are
- terminated.
+ terminated, and in
+ systemd.resource-control5,
+ which configure resource control settings for the
+ processes of the service.
Unless DefaultDependencies=
is set to , service units will
@@ -100,7 +103,7 @@
script. This is useful for compatibility with
SysV. Note that this compatibility is quite
comprehensive but not 100%. For details about the
- incompatibilities see the Incompatibilities
with SysV document.
@@ -136,14 +139,17 @@
If set to
(the default
- value if BusName=
- is not specified) it is expected that
- the process configured with
+ if neither
+ Type= nor
+ BusName=, but
+ ExecStart= are
+ specified), it is expected that the
+ process configured with
ExecStart= is the
main process of the service. In this
mode, if the process offers
functionality to other processes on
- the system its communication channels
+ the system, its communication channels
should be installed before the daemon
is started up (e.g. sockets set up by
systemd, via socket activation), as
@@ -151,14 +157,14 @@
starting follow-up units.If set to
- it is
+ , it is
expected that the process configured
with ExecStart=
will call fork()
as part of its start-up. The parent process is
expected to exit when start-up is
complete and all communication
- channels set up. The child continues
+ channels are set up. The child continues
to run as the main daemon
process. This is the behavior of
traditional UNIX daemons. If this
@@ -167,28 +173,32 @@
PIDFile= option, so
that systemd can identify the main
process of the daemon. systemd will
- proceed starting follow-up units as
- soon as the parent process
+ proceed with starting follow-up units
+ as soon as the parent process
exits.Behavior of
- is similar
- to , however
- it is expected that the process has to
+ is similar to
+ ; however, it
+ is expected that the process has to
exit before systemd starts follow-up
units. RemainAfterExit=
is particularly useful for this type
- of service.
+ of service. This is the implied
+ default if neither
+ Type= or
+ ExecStart= are
+ specified.
Behavior of
is similar to
- , however it is
+ ; however, it is
expected that the daemon acquires a
name on the D-Bus bus, as configured
by
BusName=. systemd
- will proceed starting follow-up units
- after the D-Bus bus name has been
+ will proceed with starting follow-up
+ units after the D-Bus bus name has been
acquired. Service units with this
option configured implicitly gain
dependencies on the
@@ -199,26 +209,30 @@
Behavior of
is similar to
- , however it is
+ ; however, it is
expected that the daemon sends a
notification message via
sd_notify3
- or an equivalent call when it finished
- starting up. systemd will proceed
+ or an equivalent call when it has finished
+ starting up. systemd will proceed with
starting follow-up units after this
notification message has been sent. If
- this option is used
+ this option is used,
NotifyAccess= (see
below) should be set to open access to
the notification socket provided by
systemd. If
NotifyAccess= is
not set, it will be implicitly set to
- .
+ . Note that
+ currently
+ Type=
+ will not work if used in combination with
+ PrivateNetwork=.Behavior of
is very similar
- to , however
+ to ; however,
actual execution of the service
binary is delayed until all jobs are
dispatched. This may be used to avoid
@@ -251,11 +265,11 @@
is set and
is unset because for the other types
or with an explicitly configured PID
- file the main PID is always known. The
+ file, the main PID is always known. The
guessing algorithm might come to
incorrect conclusions if a daemon
consists of more than one process. If
- the main PID cannot be determined
+ the main PID cannot be determined,
failure detection and automatic
restarting of a service will not work
reliably. Defaults to
@@ -283,14 +297,53 @@
BusName=Takes a D-Bus bus
- name, that this service is reachable
+ name that this service is reachable
as. This option is mandatory for
services where
Type= is set to
, but its use
- is otherwise recommended as well if
- the process takes a name on the D-Bus
- bus.
+ is otherwise recommended if the process
+ takes a name on the D-Bus bus.
+
+
+
+
+ BusPolicy=
+
+ If specfied, a custom kdbus
+ endpoint will be created and installed as the
+ default bus node for the service. Such a custom
+ endpoint can hold an own set of policy rules
+ that are enforced on top of the bus-wide ones.
+ The custom endpoint is named after the service
+ it was created for, and its node will be
+ bind-mounted over the default bus node
+ location, so the service can only access the
+ bus through its own endpoint. Note that custom
+ bus endpoints default to a 'deny all' policy.
+ Hence, if at least one
+ BusPolicy= directive is
+ given, you have to make sure to add explicit
+ rules for everything the service should be able
+ to do.
+ The value of this directive is comprised
+ of two parts; the bus name, and a verb to
+ specify to granted access, which is one of
+ ,
+ or
+ .
+ implies
+ , and
+ implies both and
+ .
+ If multiple access levels are specified for the
+ same bus name, the most powerful one takes
+ effect.
+
+ Examples:
+ BusPolicy=org.freedesktop.systemd1 talk
+ BusPolicy=org.foo.bar see
+ This option is only available on kdbus enabled systems.
@@ -298,35 +351,72 @@
ExecStart=Commands with their
arguments that are executed when this
- service is started.
-
-
- When
+ service is started. For each of the
+ specified commands, the first argument
+ must be an absolute and literal path
+ to an executable.
+
+ When Type is
+ not , only one
+ command may and must be given. When
Type=oneshot is
- used, more than one command may be
- specified. Multiple command lines may
- be concatenated in a single directive,
- by separating them with semicolons
- (these semicolons must be passed as
- separate words). Alternatively, this
- directive may be specified more than
- once with the same effect. However,
- the latter syntax is not recommended
- for compatibility with parsers
- suitable for XDG
- .desktop files.
- The commands are invoked one by one
- sequentially in the order they appear
- in the unit file. When
- Type is not
- , only one
- command may be given. Lone semicolons
- may be escaped as
- '\;'. If the empty
- string is assigned to this option the
+ used, none or more than one command
+ may be specified. Multiple command
+ lines may be concatenated in a single
+ directive by separating them with
+ semicolons (these semicolons must be
+ passed as separate
+ words). Alternatively, this directive
+ may be specified more than once with
+ the same effect. Lone semicolons may
+ be escaped as
+ \;. If the empty
+ string is assigned to this option, the
list of commands to start is reset,
prior assignments of this option will
- have no effect.
+ have no effect. If no
+ ExecStart= is
+ specified, then the service must have
+ RemainAfterExit=yes
+ set.
+
+ Each command line is split on
+ whitespace, with the first item being
+ the command to execute, and the
+ subsequent items being the arguments.
+ Double quotes ("...") and single
+ quotes ('...') may be used, in which
+ case everything until the next
+ matching quote becomes part of the
+ same argument. Quotes themselves are
+ removed after parsing. In addition, a
+ trailing backslash
+ (\) may be used to
+ merge lines. This syntax is intended
+ to be very similar to shell syntax,
+ but only the meta-characters and
+ expansions described in the following
+ paragraphs are understood.
+ Specifically, redirection using
+ <,
+ <<,
+ >, and
+ >>, pipes
+ using |, and
+ running programs in the background
+ using &
+ and other elements of shell
+ syntax are not supported.
+
+
+ If more than one command is
+ specified, the commands are invoked
+ sequentially in the order they appear
+ in the unit file. If one of the
+ commands fails (and is not prefixed
+ with -), other lines
+ are not executed, and the unit is
+ considered failed.Unless
Type=forking is
@@ -335,66 +425,106 @@
main process of the daemon.The command line accepts
- '%' specifiers as
+ % specifiers as
described in
- systemd.unit5. Note
- that the first argument of the command
- line (i.e. the program to execute) may
- not include specifiers.
-
- On top of that basic environment
- variable substitution is
- supported. Use
+ systemd.unit5.
+ Note that the first argument of the
+ command line (i.e. the program to
+ execute) may not include
+ specifiers.
+
+ Basic environment variable
+ substitution is supported. Use
${FOO} as part of a
- word, or as a word of its own on the
+ word, or as a word of its own, on the
command line, in which case it will be
replaced by the value of the
environment variable including all
whitespace it contains, resulting in a
- single argument. Use
+ single argument. Use
$FOO as a separate
word on the command line, in which
case it will be replaced by the value
- of the environment variable split up
- at whitespace, resulting in no or more
- arguments. Note that the first
- argument (i.e. the program to execute)
- may not be a variable, and must be a
- literal and absolute path
- name.
+ of the environment variable split at
+ whitespace, resulting in zero or more
+ arguments. To pass a literal dollar
+ sign, use $$.
+ Variables whose value is not known at
+ expansion time are treated as empty
+ strings. Note that the first argument
+ (i.e. the program to execute) may not
+ be a variable.
+
+ Variables to be used in this
+ fashion may be defined through
+ Environment= and
+ EnvironmentFile=.
+ In addition, variables listed in the
+ section "Environment variables in
+ spawned processes" in
+ systemd.exec5,
+ which are considered "static
+ configuration", may be used (this includes
+ e.g. $USER, but not
+ $TERM).Optionally, if the absolute file
name is prefixed with
- '@', the second token
+ @, the second token
will be passed as
argv[0] to the
executed process, followed by the
further arguments specified. If the
- absolute file name is prefixed with
- '-' an exit code of
+ absolute filename is prefixed with
+ -, an exit code of
the command normally considered a
failure (i.e. non-zero exit status or
abnormal exit due to signal) is ignored
and considered success. If both
- '-' and
- '@' are used they
+ - and
+ @ are used, they
can appear in either order.Note that this setting does not
directly support shell command
lines. If shell command lines are to
- be used they need to be passed
+ be used, they need to be passed
explicitly to a shell implementation
- of some kind. Example:
- ExecStart=/bin/sh -c 'dmesg | tac'
-
- For services run by a user
- instance of systemd the special
- environment variable
- MANAGERPID is set
- to the PID of the systemd
- instance.
-
+ of some kind. Example:
+ ExecStart=/bin/sh -c 'dmesg | tac'
+ Example:
+ ExecStart=/bin/echo one ; /bin/echo "two two"
+ This will execute
+ /bin/echo two
+ times, each time with one argument:
+ one and
+ two two,
+ respectively. Because two commands are
+ specified,
+ Type=oneshot must
+ be used.
+
+ Example:
+ ExecStart=/bin/echo / >/dev/null & \; \
+/bin/ls
+ This will execute
+ /bin/echo with five
+ arguments: /,
+ >/dev/null,
+ &,
+ ;, and
+ /bin/ls.
+
+ Example:
+ Environment="ONE=one" 'TWO=two two'
+ExecStart=/bin/echo $ONE $TWO ${TWO}
+ This will execute
+ /bin/echo with four
+ arguments: one,
+ two,
+ two, and
+ two two.
+
@@ -409,6 +539,11 @@
that multiple command lines are allowed
and the commands are executed one
after the other, serially.
+
+ If any of those commands (not
+ prefixed with -)
+ fail, the rest are not executed and
+ the unit is considered failed.
@@ -424,14 +559,31 @@
optional. Specifier and environment
variable substitution is supported
here following the same scheme as for
- ExecStart=. One
- additional special environment
- variables is set: if known
- $MAINPID is set to
+ ExecStart=.
+
+ One additional, special
+ environment variable is set: if known,
+ $MAINPID is set to
the main process of the daemon, and
may be used for command lines like the
- following: /bin/kill -HUP
- $MAINPID.
+ following:
+
+ /bin/kill -HUP $MAINPID
+
+ Note however that reloading a
+ daemon by sending a signal (as with
+ the example line above) is usually not
+ a good choice, because this is an
+ asynchronous operation and hence not
+ suitable to order reloads of multiple
+ services against each other. It is
+ strongly recommended to set
+ ExecReload= to a
+ command that not only triggers a
+ configuration reload of the daemon,
+ but also synchronously waits for it to
+ complete.
+
@@ -443,19 +595,19 @@
following the same scheme as described
for ExecStart=
above. Use of this setting is
- optional. All processes remaining for
- a service after the commands
- configured in this option are run are
+ optional. After the commands configured
+ in this option are run, all processes
+ remaining for a service are
terminated according to the
KillMode= setting
(see
systemd.kill5). If
- this option is not specified the
- process is terminated right-away when
+ this option is not specified, the
+ process is terminated immediately when
service stop is requested. Specifier
and environment variable substitution
is supported (including
- $MAINPID, see
+ $MAINPID, see
above).
@@ -463,9 +615,12 @@
ExecStopPost=Additional commands
that are executed after the service
- was stopped using the commands
- configured in
- ExecStop=. This
+ was stopped. This includes cases where
+ the commands configured in
+ ExecStop= were used,
+ where the service does not have any
+ ExecStop= defined, or
+ where the service exited unexpectedly. This
argument takes multiple command lines,
following the same scheme as described
for ExecStart. Use
@@ -494,15 +649,18 @@
daemon service does not signal
start-up completion within the
configured time, the service will be
- considered failed and be shut down
- again.
+ considered failed and will be shut
+ down again.
Takes a unit-less value in seconds, or a
time span value such as "5min
- 20s". Pass 0 to disable the timeout
- logic. Defaults to 90s, except when
- Type=oneshot is
- used in which case the timeout
- is disabled by default.
+ 20s". Pass 0 to
+ disable the timeout logic. Defaults to
+ DefaultTimeoutStartSec= from
+ the manager configuration file, except
+ when Type=oneshot is
+ used, in which case the timeout
+ is disabled by default
+ (see systemd-systemd.conf5).
@@ -510,17 +668,20 @@
TimeoutStopSec=Configures the time to
wait for stop. If a service is asked
- to stop but does not terminate in the
+ to stop, but does not terminate in the
specified time, it will be terminated
- forcibly via SIGTERM, and after
- another delay of this time with
- SIGKILL (See
+ forcibly via SIGTERM,
+ and after another timeout of equal duration
+ with SIGKILL (see
KillMode=
in systemd.kill5).
Takes a unit-less value in seconds, or a
time span value such as "5min
- 20s". Pass 0 to disable the timeout
- logic. Defaults to 90s.
+ 20s". Pass 0 to disable
+ the timeout logic. Defaults to
+ DefaultTimeoutStopSec= from the
+ manager configuration file
+ (see systemd-systemd.conf5).
@@ -536,18 +697,18 @@
WatchdogSec=Configures the
- watchdog timeout for a service. This
- is activated when the start-up is
+ watchdog timeout for a service. The
+ watchdog is activated when the start-up is
completed. The service must call
sd_notify3
- regularly with "WATCHDOG=1" (i.e. the
- "keep-alive ping"). If the time
+ regularly with WATCHDOG=1
+ (i.e. the "keep-alive ping"). If the time
between two such calls is larger than
- the configured time then the service
- is placed in a failure state. By
+ the configured time, then the service
+ is placed in a failed state. By
setting Restart= to
or
- the service
+ , the service
will be automatically restarted. The
time configured here will be passed to
the executed service process in the
@@ -556,7 +717,7 @@
daemons to automatically enable the
keep-alive pinging logic if watchdog
support is enabled for the service. If
- this option is used
+ this option is used,
NotifyAccess= (see
below) should be set to open access to
the notification socket provided by
@@ -571,37 +732,174 @@
Restart=Configures whether the
- main service process shall be
- restarted when it exits. Takes one of
+ service shall be restarted when the
+ service process exits, is killed,
+ or a timeout is reached. The service
+ process may be the main service
+ process, but it may also be one of the
+ processes specified with
+ ExecStartPre=,
+ ExecStartPost=,
+ ExecStop=,
+ ExecStopPost=, or
+ ExecReload=.
+ When the death of the process is a
+ result of systemd operation (e.g. service
+ stop or restart), the service will not be
+ restarted. Timeouts include missing
+ the watchdog "keep-alive ping"
+ deadline and a service start, reload,
+ and stop operation timeouts.
+
+ Takes one of
,
,
,
- or
+ ,
+ ,
+ , or
. If set to
- (the default) the
- service will not be restarted when it
- exits. If set to
- it will be
- restarted only when it exited cleanly,
- i.e. terminated with an exit code of
- 0. If set to
- it will be
- restarted only when it exited with an
- exit code not equaling 0, when
- terminated by a signal (including on
- core dump), when an operation (such as
- service reload) times out or when the
- configured watchdog timeout is
- triggered. If set to
- it will be
- restarted only if it exits due to
- reception of an uncaught signal
- (including on core dump). If set to
- the service
- will be restarted regardless whether
- it exited cleanly or not, got
- terminated abnormally by a signal or
- hit a timeout.
+ (the default), the
+ service will not be restarted. If set
+ to , it
+ will be restarted only when the
+ service process exits cleanly. In
+ this context, a clean exit means an
+ exit code of 0, or one of the signals
+ SIGHUP,
+ SIGINT,
+ SIGTERM or
+ SIGPIPE, and
+ additionally, exit statuses and
+ signals specified in
+ SuccessExitStatus=.
+ If set to ,
+ the service will be restarted when the
+ process exits with a non-zero exit
+ code, is terminated by a signal
+ (including on core dump, but excluding
+ the aforementiond four signals), when
+ an operation (such as service reload)
+ times out, and when the configured
+ watchdog timeout is triggered. If set
+ to , the
+ service will be restarted when the
+ process is terminated by a signal
+ (including on core dump, excluding the
+ aforementioned four signals), when an
+ operation times out, or when the
+ watchdog timeout is triggered. If set
+ to , the
+ service will be restarted only if the
+ service process exits due to an
+ uncaught signal not specified as a
+ clean exit status. If set to
+ , the
+ service will be restarted only if the
+ watchdog timeout for the service
+ expires. If set to
+ , the service
+ will be restarted regardless of
+ whether it exited cleanly or not, got
+ terminated abnormally by a signal, or
+ hit a timeout.
+
+
+ Exit causes and the effect of the Restart= settings on them
+
+
+
+
+
+
+ Restart settings/Exit causes
+
+
+
+
+
+
+
+
+
+
+
+ Clean exit code or signal
+
+ X
+ X
+
+
+
+
+
+
+ Unclean exit code
+
+ X
+
+ X
+
+
+
+
+
+ Unclean signal
+
+ X
+
+ X
+ X
+ X
+
+
+
+ Timeout
+
+ X
+
+ X
+ X
+
+
+
+
+ Watchdog
+
+ X
+
+ X
+ X
+
+ X
+
+
+
+
+
+ As exceptions to the setting
+ above the service will not be
+ restarted if the exit code or signal
+ is specified in
+ RestartPreventExitStatus=
+ (see below). Also, the services will
+ always be restarted if the exit code
+ or signal is specified in
+ RestartForceExitStatus=
+ (see below).
+
+ Setting this to
+ is the
+ recommended choice for long-running
+ services, in order to increase
+ reliability by attempting automatic
+ recovery from errors. For services
+ that shall be able to terminate on
+ their own choice (and avoid
+ immediate restarting),
+ is an
+ alternative choice.
+
@@ -611,22 +909,33 @@
by the main service process will be
considered successful termination, in
addition to the normal successful exit
- code 0 and the signals SIGHUP, SIGINT,
- SIGTERM and SIGPIPE. Exit status
+ code 0 and the signals SIGHUP, SIGINT,
+ SIGTERM, and SIGPIPE. Exit status
definitions can either be numeric exit
- codes or termination signal names, and
- are separated by spaces. Example:
- "SuccessExitStatus=1 2 8
- SIGKILL", ensures that exit
- codes 1, 2, 8 and the termination
- signal SIGKILL are considered clean
- service terminations. This option may
- appear more than once in which case
- the list of successful exit statuses
- is merged. If the empty string is
- assigned to this option the list is
- reset, all prior assignments of this
- option will have no
+ codes or termination signal names,
+ separated by spaces. For example:
+ SuccessExitStatus=1 2 8 SIGKILL
+ ensures that exit codes 1, 2, 8 and
+ the termination signal
+ SIGKILL are
+ considered clean service terminations.
+
+
+ Note that if a process has a
+ signal handler installed and exits by
+ calling
+ _exit2
+ in response to a signal, the
+ information about the signal is lost.
+ Programs should instead perform cleanup and kill themselves with the same signal instead. See
+ Proper handling of SIGINT/SIGQUIT â How to be a proper program.
+
+ This option may appear more than once,
+ in which case the list of successful
+ exit statuses is merged. If the empty
+ string is assigned to this option, the
+ list is reset, all prior assignments
+ of this option will have no
effect.
@@ -635,7 +944,7 @@
Takes a list of exit
status definitions that when returned
by the main service process will
- prevent automatic service restarts
+ prevent automatic service restarts,
regardless of the restart setting
configured with
Restart=. Exit
@@ -643,40 +952,52 @@
numeric exit codes or termination
signal names, and are separated by
spaces. Defaults to the empty list, so
- that by default no exit status is
+ that, by default, no exit status is
excluded from the configured restart
- logic. Example:
- "RestartPreventExitStatus=1 6
- SIGABRT", ensures that exit
+ logic. For example:
+ RestartPreventExitStatus=1 6 SIGABRT ensures that exit
codes 1 and 6 and the termination
- signal SIGABRT will not result in
- automatic service restarting. This
- option may appear more than once in
- which case the list of restart preventing
+ signal SIGABRT will
+ not result in automatic service
+ restarting. This
+ option may appear more than once, in
+ which case the list of restart-preventing
statuses is merged. If the empty
- string is assigned to this option the
- list is reset, all prior assignments
+ string is assigned to this option, the
+ list is reset and all prior assignments
of this option will have no
effect.
+
+ RestartForceExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will force
+ automatic service restarts, regardless
+ of the restart setting configured with
+ Restart=. The
+ argument format is similar to
+ RestartPreventExitStatus=.
+
+
PermissionsStartOnly=Takes a boolean
- argument. If true, the permission
- related execution options as
+ argument. If true, the permission-related
+ execution options, as
configured with
User= and similar
options (see
systemd.exec5
- for more information) are only applied
+ for more information), are only applied
to the process started with
ExecStart=, and not
to the various other
ExecStartPre=,
ExecStartPost=,
ExecReload=,
- ExecStop=,
+ ExecStop=, and
ExecStopPost=
commands. If false, the setting is
applied to all configured commands the
@@ -687,19 +1008,19 @@
RootDirectoryStartOnly=Takes a boolean
- argument. If true, the root directory
+ argument. If true, the root directory,
as configured with the
RootDirectory=
option (see
systemd.exec5
- for more information) is only applied
+ for more information), is only applied
to the process started with
ExecStart=, and not
to the various other
ExecStartPre=,
ExecStartPost=,
ExecReload=,
- ExecStop=,
+ ExecStop=, and
ExecStopPost=
commands. If false, the setting is
applied to all configured commands the
@@ -709,12 +1030,14 @@
NonBlocking=
- Set O_NONBLOCK flag
+ Set the
+ O_NONBLOCK flag
for all file descriptors passed via
socket-based activation. If true, all
file descriptors >= 3 (i.e. all except
- STDIN/STDOUT/STDERR) will have
- the O_NONBLOCK flag set and hence are in
+ stdin, stdout, and stderr) will have
+ the O_NONBLOCK flag
+ set and hence are in
non-blocking mode. This option is only
useful in conjunction with a socket
unit, as described in
@@ -732,13 +1055,13 @@
(the default),
or
. If
- no daemon status
+ , no daemon status
updates are accepted from the service
processes, all status update messages
- are ignored. If
+ are ignored. If ,
only service updates sent from the
main process of the service are
- accepted. If all
+ accepted. If , all
services updates from all members of
the service's control group are
accepted. This option should be set to
@@ -747,8 +1070,8 @@
Type=notify or
WatchdogSec= (see
above). If those options are used but
- NotifyAccess= not
- configured it will be implicitly set
+ NotifyAccess= is not
+ configured, it will be implicitly set
to
.
@@ -770,11 +1093,11 @@
passed to multiple processes at the
same time. Also note that a different
service may be activated on incoming
- traffic than inherits the sockets. Or
- in other words: the
+ traffic than that which inherits the
+ sockets. Or in other words: the
Service= setting of
.socket units
- doesn't have to match the inverse of
+ does not have to match the inverse of
the Sockets=
setting of the
.service it
@@ -783,8 +1106,8 @@
This option may appear more than
once, in which case the list of socket
units is merged. If the empty string
- is assigned to this option the list of
- sockets is reset, all prior uses of
+ is assigned to this option, the list of
+ sockets is reset, and all prior uses of
this setting will have no
effect.
@@ -794,34 +1117,37 @@
StartLimitBurst=Configure service
- start rate limiting. By default
- services which are started more often
- than 5 times within 10s are not
+ start rate limiting. By default,
+ services which are started more
+ than 5 times within 10 seconds are not
permitted to start any more times
- until the 10s interval ends. With
- these two options this rate limiting
+ until the 10 second interval ends. With
+ these two options, this rate limiting
may be modified. Use
StartLimitInterval=
- to configure the checking interval
- (defaults to 10s, set to 0 to disable
+ to configure the checking interval (defaults to
+ DefaultStartLimitInterval= in
+ manager configuration file, set to 0 to disable
any kind of rate limiting). Use
StartLimitBurst= to
configure how many starts per interval
- are allowed (defaults to 5). These
+ are allowed (defaults to
+ DefaultStartLimitBurst= in
+ manager configuration file). These
configuration options are particularly
useful in conjunction with
- Restart=, however
- apply to all kinds of starts
+ Restart=; however,
+ they apply to all kinds of starts
(including manual), not just those
triggered by the
Restart= logic.
Note that units which are configured
for Restart= and
which reach the start limit are not
- attempted to be restarted anymore,
- however they may still be restarted
- manually at a later point from which
- point on the restart logic is again
+ attempted to be restarted anymore;
+ however, they may still be restarted
+ manually at a later point, from which
+ point on, the restart logic is again
activated. Note that
systemctl
reset-failed will cause the
@@ -845,30 +1171,63 @@
hit. Takes one of
,
,
- or
- . If
- is set,
- hitting the rate limit will trigger no
- action besides that the start will not
- be
+ ,
+ ,
+ ,
+ or
+ . If
+ is set, hitting
+ the rate limit will trigger no action
+ besides that the start will not be
permitted.
causes a reboot following the normal
shutdown procedure (i.e. equivalent to
- systemctl reboot),
- causes
- an forced reboot which will terminate
- all processes forcibly but should
- cause no dirty file systems on reboot
+ systemctl reboot).
+ causes a
+ forced reboot which will terminate all
+ processes forcibly but should cause no
+ dirty file systems on reboot
(i.e. equivalent to systemctl
reboot -f) and
causes immediate execution of the
reboot2
system call, which might result in
- data loss. Defaults to
+ data loss. Similar,
+ ,
+ ,
+
+ have the effect of powering down the
+ system with similar
+ semantics. Defaults to
.
+
+ FailureAction=
+ Configure the action
+ to take when the service enters a failed
+ state. Takes the same values as
+ StartLimitAction=
+ and executes the same actions.
+ Defaults to .
+
+
+
+
+ RebootArgument=
+ Configure the optional
+ argument for the
+ reboot2
+ system call if
+ StartLimitAction=
+ or FailureAction=
+ is a reboot action. This works just
+ like the optional argument to
+ systemctl reboot
+ command.
+
+
Check
@@ -895,49 +1254,21 @@
in relation to SysV services lacking
LSB headers. This option is only
necessary to fix ordering in relation
- to legacy SysV services, that have no
+ to legacy SysV services that have no
ordering information encoded in the
- script headers. As such it should only
- be used as temporary compatibility
- option, and not be used in new unit
- files. Almost always it is a better
+ script headers. As such, it should only
+ be used as a temporary compatibility
+ option and should not be used in new unit
+ files. Almost always, it is a better
choice to add explicit ordering
directives via
After= or
Before=,
- instead. For more details see
- systemd.unit5. If
- used, pass an integer value in the
+ instead. For more details, see
+ systemd.unit5.
+ If used, pass an integer value in the
range 0-99.
-
-
- FsckPassNo=
- Set the fsck passno
- priority to use to order this service
- in relation to other file system
- checking services. This option is only
- necessary to fix ordering in relation
- to fsck jobs automatically created for
- all /etc/fstab
- entries with a value in the fs_passno
- column > 0. As such it should only be
- used as option for fsck
- services. Almost always it is a better
- choice to add explicit ordering
- directives via
- After= or
- Before=,
- instead. For more details see
- systemd.unit5. If
- used, pass an integer value in the
- same range as
- /etc/fstab's
- fs_passno column. See
- fstab5
- for details.
-
-
@@ -945,9 +1276,10 @@