X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.service.xml;h=72b67c698801c2a00b44f8849ea82ee28a43471e;hb=d87be9b0af81a6e07d4fb3028e45c4409100dc26;hp=38a4035f67cb001825a693664f30ec1bf75182bb;hpb=34511ca7b166b0e89d08ff9870b0cf2624a7815f;p=elogind.git
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index 38a4035f6..72b67c698 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -72,7 +72,10 @@
Additional options are listed in
systemd.exec5,
which define the execution environment the commands
- are executed in.
+ are executed in, and in
+ systemd.kill5
+ which define the way the processes of the service are
+ terminated.
Unless DefaultDependencies=
is set to , service units will
@@ -112,7 +115,9 @@
supervises. A number of options that may be used in
this section are shared with other unit types. These
options are documented in
- systemd.exec5. The
+ systemd.exec5
+ and
+ systemd.kill5. The
options specific to the [Service]
section of service units are the following:
@@ -417,12 +422,13 @@
configured in this option are run are
terminated according to the
KillMode= setting
- (see below). If this option is not
- specified the process is terminated
- right-away when service stop is
- requested. Specifier and environment
- variable substitution is supported
- (including
+ (see
+ systemd.kill5). If
+ this option is not specified the
+ process is terminated right-away when
+ service stop is requested. Specifier
+ and environment variable substitution
+ is supported (including
$MAINPID, see
above).
@@ -457,27 +463,49 @@
- TimeoutSec=
+ TimeoutStartSec=Configures the time to
- wait for start-up and stop. If a
+ wait for start-up. If a
daemon service does not signal
start-up completion within the
- configured time the service will be
+ configured time, the service will be
considered failed and be shut down
- again. If a service is asked to stop
- but does not terminate in the
- specified time it will be terminated
+ again.
+ Takes a unit-less value in seconds, or a
+ time span value such as "5min
+ 20s". Pass 0 to disable the timeout
+ logic. Defaults to 90s, except when
+ Type=oneshot is
+ used in which case the timeout
+ is disabled by default.
+
+
+
+
+ TimeoutStopSec=
+ Configures the time to
+ wait for stop. If a service is asked
+ to stop but does not terminate in the
+ specified time, it will be terminated
forcibly via SIGTERM, and after
another delay of this time with
- SIGKILL. (See
+ SIGKILL (See
KillMode=
- below.) Takes a unit-less value in seconds, or a
+ in systemd.kill5).
+ Takes a unit-less value in seconds, or a
time span value such as "5min
20s". Pass 0 to disable the timeout
- logic. Defaults to
- 90s, except when Type=oneshot is
- used in which case the timeout
- is disabled by default.
+ logic. Defaults to 90s.
+
+
+
+
+ TimeoutSec=
+ A shorthand for configuring
+ both TimeoutStartSec=
+ and TimeoutStopSec=
+ to the specified value.
+
@@ -551,6 +579,49 @@
hit a timeout.
+
+ SuccessExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will be
+ considered successful termination, in
+ addition to the normal successful exit
+ code 0 and the signals SIGHUP, SIGINT,
+ SIGTERM and SIGPIPE. Exit status
+ definitions can either be numeric exit
+ codes or termination signal names, and
+ are are separated by spaces. Example:
+ "SuccessExitStatus=1 2 8
+ SIGKILL", ensures that exit
+ codes 1, 2, 8 and the termination
+ signal SIGKILL are considered clean
+ service
+ terminations.
+
+
+
+ RestartPreventExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will
+ prevent automatic service restarts
+ regardless of the restart setting
+ configured with
+ Restart=. Exit
+ status definitions can either be
+ numeric exit codes or termination
+ signal names, and are separated by
+ spaces. Defaults to the empty list, so
+ that by default no exit status is
+ excluded from the configured restart
+ logic. Example:
+ "RestartPreventExitStatus=1 6
+ SIGABRT", ensures that exit
+ codes 1 and 6 and the termination signal
+ SIGABRT will not result in automatic
+ service restarting.
+
+
PermissionsStartOnly=Takes a boolean
@@ -598,72 +669,6 @@
false.
-
- KillMode=
- Specifies how
- processes of this service shall be
- killed. One of
- ,
- ,
- .
-
- If set to
- all
- remaining processes in the control
- group of this service will be
- terminated on service stop, after the
- stop command (as configured with
- ExecStop=) is
- executed. If set to
- only the main
- process itself is killed. If set to
- no process is
- killed. In this case only the stop
- command will be executed on service
- stop, but no process be killed
- otherwise. Processes remaining alive
- after stop are left in their control
- group and the control group continues
- to exist after stop unless it is
- empty. Defaults to
- .
-
- Processes will first be
- terminated via SIGTERM (unless the
- signal to send is changed via
- KillSignal=). If
- then after a delay (configured via the
- TimeoutSec= option)
- processes still remain, the
- termination request is repeated with
- the SIGKILL signal (unless this is
- disabled via the
- SendSIGKILL=
- option). See
- kill2
- for more
- information.
-
-
-
- KillSignal=
- Specifies which signal
- to use when killing a
- service. Defaults to SIGTERM.
-
-
-
-
- SendSIGKILL=
- Specifies whether to
- send SIGKILL to remaining processes
- after a timeout, if the normal
- shutdown procedure left processes of
- the service around. Takes a boolean
- value. Defaults to "yes".
-
-
-
NonBlocking=Set O_NONBLOCK flag
@@ -818,6 +823,13 @@
+
+ Check
+ systemd.exec5
+ and
+ systemd.kill5
+ for more settings.
+
@@ -888,7 +900,8 @@
systemd1,
systemctl8,
systemd.unit5,
- systemd.exec5
+ systemd.exec5,
+ systemd.kill5