X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.service.xml;h=5b3afb86d2c64d65830bc75c61c6e68fca25ad89;hb=2292547af9638e2b3f7e0e96a56dd6c909e516dc;hp=d573ec6f96a3721652cc330b3f09eecc98502317;hpb=525ee6f4a1639bcb28198bf9e32b93ca2bfd268b;p=elogind.git
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index d573ec6f9..5b3afb86d 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -9,16 +9,16 @@
Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see .
-->
@@ -44,11 +44,11 @@
systemd.service
- systemd service configuration files
+ Service unit configuration
- systemd.service
+ service.service
@@ -72,7 +72,13 @@
Additional options are listed in
systemd.exec5,
which define the execution environment the commands
- are executed in.
+ are executed in, and in
+ systemd.kill5,
+ which define the way the processes of the service are
+ terminated, and in
+ systemd.resource-control5,
+ which configure resource control settings for the
+ processes of the service.
Unless DefaultDependencies=
is set to , service units will
@@ -95,7 +101,12 @@
.service suffix removed) and
dynamically creates a service unit from that
script. This is useful for compatibility with
- SysV.
+ SysV. Note that this compatibility is quite
+ comprehensive but not 100%. For details about the
+ incompatibilities, see the Incompatibilities
+ with SysV document.
+
@@ -107,11 +118,13 @@
supervises. A number of options that may be used in
this section are shared with other unit types. These
options are documented in
- systemd.exec5. The
+ systemd.exec5
+ and
+ systemd.kill5. The
options specific to the [Service]
section of service units are the following:
-
+ Type=
@@ -121,17 +134,21 @@
,
,
,
- .
+ or
+ .
If set to
(the default
- value) it is expected that the process
- configured with
+ value if neither
+ Type= nor
+ BusName= are
+ specified), it is expected that the
+ process configured with
ExecStart= is the
main process of the service. In this
mode, if the process offers
functionality to other processes on
- the system its communication channels
+ the system, its communication channels
should be installed before the daemon
is started up (e.g. sockets set up by
systemd, via socket activation), as
@@ -139,68 +156,84 @@
starting follow-up units.If set to
- it is
+ , it is
expected that the process configured
with ExecStart=
will call fork()
as part of its start-up. The parent process is
expected to exit when start-up is
complete and all communication
- channels set up. The child continues
+ channels are set up. The child continues
to run as the main daemon
- process. This is the behaviour of
+ process. This is the behavior of
traditional UNIX daemons. If this
setting is used, it is recommended to
also use the
PIDFile= option, so
that systemd can identify the main
process of the daemon. systemd will
- proceed starting follow-up units as
- soon as the parent process
+ proceed with starting follow-up units
+ as soon as the parent process
exits.
- Behaviour of
+ Behavior of
is similar
- to , however
+ to ; however,
it is expected that the process has to
exit before systemd starts follow-up
units. RemainAfterExit=
is particularly useful for this type
of service.
- Behaviour of
+ Behavior of
is similar to
- , however it is
+ ; however, it is
expected that the daemon acquires a
name on the D-Bus bus, as configured
by
BusName=. systemd
- will proceed starting follow-up units
- after the D-Bus bus name has been
+ will proceed with starting follow-up
+ units after the D-Bus bus name has been
acquired. Service units with this
option configured implicitly gain
dependencies on the
- dbus.target
- unit.
+ dbus.socket
+ unit. This type is the default if
+ BusName= is
+ specified.
- Behaviour of
+ Behavior of
is similar to
- , however it is
+ ; however, it is
expected that the daemon sends a
notification message via
sd_notify3
- or an equivalent call when it finished
- starting up. systemd will proceed
+ or an equivalent call when it has finished
+ starting up. systemd will proceed with
starting follow-up units after this
notification message has been sent. If
- this option is used
+ this option is used,
NotifyAccess= (see
below) should be set to open access to
the notification socket provided by
systemd. If
- NotifyAccess= is not
- set, it will implicitly be set to
- .
+ NotifyAccess= is
+ not set, it will be implicitly set to
+ . Note that
+ currently
+ Type=
+ will not work if used in combination with
+ PrivateNetwork=.
+
+ Behavior of
+ is very similar
+ to ; however,
+ actual execution of the service
+ binary is delayed until all jobs are
+ dispatched. This may be used to avoid
+ interleaving of output of shell
+ services with the status output on the
+ console.
@@ -215,6 +248,30 @@
+
+ GuessMainPID=
+
+ Takes a boolean value
+ that specifies whether systemd should
+ try to guess the main PID of a service
+ if it cannot be determined
+ reliably. This option is ignored
+ unless
+ is set and
+ is unset because for the other types
+ or with an explicitly configured PID
+ file, the main PID is always known. The
+ guessing algorithm might come to
+ incorrect conclusions if a daemon
+ consists of more than one process. If
+ the main PID cannot be determined,
+ failure detection and automatic
+ restarting of a service will not work
+ reliably. Defaults to
+ .
+
+
+
PIDFile=
@@ -223,7 +280,11 @@
daemon. Use of this option is
recommended for services where
Type= is set to
- .
+ . systemd will
+ read the PID of the main process of
+ the daemon after start-up of the
+ service. systemd will not write to the
+ file configured here.
@@ -231,34 +292,131 @@
BusName=Takes a D-Bus bus
- name, where this service is reachable
+ name that this service is reachable
as. This option is mandatory for
services where
Type= is set to
, but its use
- is otherwise recommended as well if
- the process takes a name on the D-Bus
- bus.
+ is otherwise recommended if the process
+ takes a name on the D-Bus bus.
ExecStart=
- Takes a command line
- that is executed when this service
- shall be started up. The first token
- of the command line must be an
- absolute file name, then followed by
- arguments for the process. It is
- mandatory to set this option for all
- services. This option may not be
- specified more than once, except when
+ Commands with their
+ arguments that are executed when this
+ service is started. For each of the
+ specified commands, the first argument
+ must be an absolute and literal path
+ to an executable.
+
+ When Type is
+ not , only one
+ command may be given. When
Type=oneshot is
- used in which case more than one
- ExecStart= line is
- accepted which are then invoked one by
- one, sequentially in the order they
- appear in the unit file.
+ used, more than one command may be
+ specified. Multiple command lines may
+ be concatenated in a single directive
+ by separating them with semicolons
+ (these semicolons must be passed as
+ separate words). Alternatively, this
+ directive may be specified more than
+ once with the same effect.
+ Lone semicolons may be escaped as
+ \;. If the empty
+ string is assigned to this option, the
+ list of commands to start is reset,
+ prior assignments of this option will
+ have no effect.
+
+ Each command line is split on
+ whitespace, with the first item being
+ the command to execute, and the
+ subsequent items being the arguments.
+ Double quotes ("...") and single
+ quotes ('...') may be used, in which
+ case everything until the next
+ matching quote becomes part of the
+ same argument. Quotes themselves are
+ removed after parsing. In addition, a
+ trailing backslash
+ (\) may be used to
+ merge lines. This syntax is intended
+ to be very similar to shell syntax,
+ but only the meta-characters and
+ expansions described in the following
+ paragraphs are understood.
+ Specifically, redirection using
+ <,
+ <<,
+ >, and
+ >>, pipes
+ using |, and
+ running programs in the background
+ using &
+ and other elements of shell
+ syntax are not supported.
+
+
+ If more than one command is
+ specified, the commands are invoked
+ sequentially in the order they appear
+ in the unit file. If one of the
+ commands fails (and is not prefixed
+ with -), other lines
+ are not executed, and the unit is
+ considered failed.
+
+ Unless
+ Type=forking is
+ set, the process started via this
+ command line will be considered the
+ main process of the daemon.
+
+ The command line accepts
+ % specifiers as
+ described in
+ systemd.unit5.
+ Note that the first argument of the
+ command line (i.e. the program to
+ execute) may not include
+ specifiers.
+
+ Basic environment variable
+ substitution is supported. Use
+ ${FOO} as part of a
+ word, or as a word of its own, on the
+ command line, in which case it will be
+ replaced by the value of the
+ environment variable including all
+ whitespace it contains, resulting in a
+ single argument. Use
+ $FOO as a separate
+ word on the command line, in which
+ case it will be replaced by the value
+ of the environment variable split at
+ whitespace, resulting in zero or more
+ arguments. To pass a literal dollar
+ sign, use $$.
+ Variables whose value is not known at
+ expansion time are treated as empty
+ strings. Note that the first argument
+ (i.e. the program to execute) may not
+ be a variable.
+
+ Variables to be used in this
+ fashion may be defined through
+ Environment= and
+ EnvironmentFile=.
+ In addition, variables listed in the
+ section "Environment variables in
+ spawned processes" in
+ systemd.exec5,
+ which are considered "static
+ configuration", may be used (this includes
+ e.g. $USER, but not
+ $TERM).Optionally, if the absolute file
name is prefixed with
@@ -267,62 +425,76 @@
argv[0] to the
executed process, followed by the
further arguments specified. If the
- first token is prefixed with
- - an exit code of
+ absolute filename is prefixed with
+ -, an exit code of
the command normally considered a
failure (i.e. non-zero exit status or
- abormal exit due to signal) is ignored
+ abnormal exit due to signal) is ignored
and considered success. If both
- and
- @ are used for the
- same command the former must preceed
- the latter. Unless
- Type=forking is
- set, the process started via this
- command line will be considered the
- main process of the daemon. The
- command line accepts % specifiers as
- described in
- systemd.unit5. On
- top of that basic environment variable
- substitution is supported, where
- ${FOO} is replaced
- by the string value of the environment
- variable of the same name. Also
- $FOO may appear as
- separate word on the command line in
- which case the variable is replaced by
- its value split at whitespaces. Note
- that the first argument (i.e. the
- binary to execute) may not be a
- variable, and must be a literal and
- absolute path name.
+ @ are used, they
+ can appear in either order.
+
+ Note that this setting does not
+ directly support shell command
+ lines. If shell command lines are to
+ be used, they need to be passed
+ explicitly to a shell implementation
+ of some kind. Example:
+ ExecStart=/bin/sh -c 'dmesg | tac'
+ Example:
+ ExecStart=/bin/echo one ; /bin/echo "two two"
+ This will execute
+ /bin/echo two
+ times, each time with one argument:
+ one and
+ two two,
+ respectively. Because two commands are
+ specified,
+ Type=oneshot must
+ be used.
+
+ Example:
+ ExecStart=/bin/echo / >/dev/null & \; \
+/bin/ls
+ This will execute
+ /bin/echo with five
+ arguments: /,
+ >/dev/null,
+ &,
+ ;, and
+ /bin/ls.
+
+ Example:
+ Environment="ONE=one" 'TWO=two two'
+ExecStart=/bin/echo $ONE $TWO ${TWO}
+ This will execute
+ /bin/echo with four
+ arguments: one,
+ two,
+ two, and
+ two two.
+
ExecStartPre=ExecStartPost=Additional commands
- that are executed before (resp. after)
+ that are executed before or after
the command in
- ExecStart=. Multiple
- command lines may be concatenated in a
- single directive, by seperating them
- by semicolons (these semicolons must
- be passed as separate words). In that
- case, the commands are executed one
- after the other,
- serially. Alternatively, these
- directives may be specified more than
- once whith the same effect. However,
- the latter syntax is not recommended
- for compatibility with parsers
- suitable for XDG
- .desktop files.
- Use of these settings is
- optional. Specifier and environment
- variable substitution is
- supported.
+ ExecStart=, respectively.
+ Syntax is the same as for
+ ExecStart=, except
+ that multiple command lines are allowed
+ and the commands are executed one
+ after the other, serially.
+
+ If any of those commands (not
+ prefixed with -)
+ fail, the rest are not executed and
+ the unit is considered failed.
+
@@ -331,20 +503,23 @@
trigger a configuration reload in the
service. This argument takes multiple
command lines, following the same
- scheme as pointed out for
- ExecStartPre=
+ scheme as described for
+ ExecStart=
above. Use of this setting is
optional. Specifier and environment
variable substitution is supported
here following the same scheme as for
- ExecStart=. One
- special environment variable is set:
- if known $MAINPID is
- set to the main process of the
- daemon, and may be used for command
- lines like the following:
- /bin/kill -HUP
- $(MAINPID).
+ ExecStart=.
+
+ One additional, special
+ environment variable is set: if known,
+ $MAINPID is set to
+ the main process of the daemon, and
+ may be used for command lines like the
+ following:
+
+ /bin/kill -HUP $MAINPID
+
@@ -353,22 +528,22 @@
stop the service started via
ExecStart=. This
argument takes multiple command lines,
- following the same scheme as pointed
- out for
- ExecStartPre=
+ following the same scheme as described
+ for ExecStart=
above. Use of this setting is
- optional. All processes remaining for
- a service after the commands
- configured in this option are run are
+ optional. After the commands configured
+ in this option are run, all processes
+ remaining for a service are
terminated according to the
KillMode= setting
- (see below). If this option is not
- specified the process is terminated
- right-away when service stop is
- requested. Specifier and environment
- variable substitution is supported
- (including
- $(MAINPID), see
+ (see
+ systemd.kill5). If
+ this option is not specified, the
+ process is terminated immediately when
+ service stop is requested. Specifier
+ and environment variable substitution
+ is supported (including
+ $MAINPID, see
above).
@@ -376,13 +551,15 @@
ExecStopPost=Additional commands
that are executed after the service
- was stopped using the commands
- configured in
- ExecStop=. This
+ was stopped. This includes cases where
+ the commands configured in
+ ExecStop= were used,
+ where the service does not have any
+ ExecStop= defined, or
+ where the service exited unexpectedly. This
argument takes multiple command lines,
- following the same scheme as pointed
- out for
- ExecStartPre. Use
+ following the same scheme as described
+ for ExecStart. Use
of these settings is
optional. Specifier and environment
variable substitution is
@@ -402,66 +579,248 @@
- TimeoutSec=
+ TimeoutStartSec=Configures the time to
- wait for start-up and stop. If a
+ wait for start-up. If a
daemon service does not signal
start-up completion within the
- configured time the service will be
- considered failed and be shut down
- again. If a service is asked to stop
- but does not terminate in the
- specified time it will be terminated
- forcibly via SIGTERM, and after
- another delay of this time with
- SIGKILL. (See
+ configured time, the service will be
+ considered failed and will be shut
+ down again.
+ Takes a unit-less value in seconds, or a
+ time span value such as "5min
+ 20s". Pass 0 to
+ disable the timeout logic. Defaults to
+ TimeoutStartSec= from
+ the manager configuration file, except
+ when Type=oneshot is
+ used, in which case the timeout
+ is disabled by default.
+
+
+
+
+ TimeoutStopSec=
+ Configures the time to
+ wait for stop. If a service is asked
+ to stop, but does not terminate in the
+ specified time, it will be terminated
+ forcibly via SIGTERM,
+ and after another timeout of equal duration
+ with SIGKILL (see
KillMode=
- below.) Takes a unit-less value in seconds, or a
+ in systemd.kill5).
+ Takes a unit-less value in seconds, or a
time span value such as "5min
- 20s". Pass 0 to disable the timeout
- logic. Defaults to
- 60s.
+ 20s". Pass 0 to disable
+ the timeout logic. Defaults to
+ TimeoutStartSec= from the
+ manager configuration file.
+
+
+
+
+ TimeoutSec=
+ A shorthand for configuring
+ both TimeoutStartSec=
+ and TimeoutStopSec=
+ to the specified value.
+
+
+
+
+ WatchdogSec=
+ Configures the
+ watchdog timeout for a service. The
+ watchdog is activated when the start-up is
+ completed. The service must call
+ sd_notify3
+ regularly with WATCHDOG=1
+ (i.e. the "keep-alive ping"). If the time
+ between two such calls is larger than
+ the configured time, then the service
+ is placed in a failed state. By
+ setting Restart= to
+ or
+ , the service
+ will be automatically restarted. The
+ time configured here will be passed to
+ the executed service process in the
+ WATCHDOG_USEC=
+ environment variable. This allows
+ daemons to automatically enable the
+ keep-alive pinging logic if watchdog
+ support is enabled for the service. If
+ this option is used,
+ NotifyAccess= (see
+ below) should be set to open access to
+ the notification socket provided by
+ systemd. If
+ NotifyAccess= is
+ not set, it will be implicitly set to
+ . Defaults to 0,
+ which disables this
+ feature.Restart=Configures whether the
- main service process shall be restarted when
- it exists. Takes one of
+ service shall be restarted when the
+ service process exits, is killed,
+ or a timeout is reached. The service
+ process may be the main service
+ process, but it may also be one of the
+ processes specified with
+ ExecStartPre=,
+ ExecStartPost=,
+ ExecStop=,
+ ExecStopPost=, or
+ ExecReload=.
+ When the death of the process is a
+ result of systemd operation (e.g. service
+ stop or restart), the service will not be
+ restarted. Timeouts include missing
+ the watchdog "keep-alive ping"
+ deadline and a service start, reload,
+ and stop operation timeouts.
+
+ Takes one of
,
- or
- . If
- set to (the
- default) the service will not be
- restarted when it exits. If set to
- it
- will be restarted only when it exited
- cleanly, i.e. terminated with an exit
- code of 0. If set to
- the
- service will be restarted regardless
- whether it exited cleanly or not, or
- got terminated abnormally by a
- signal.
+ ,
+ ,
+ ,
+ , or
+ . If set to
+ (the default), the
+ service will not be restarted. If set to
+ , it will be
+ restarted only when the service process
+ exits cleanly.
+ In this context, a clean exit means
+ an exit code of 0, or one of the signals
+ SIGHUP,
+ SIGINT,
+ SIGTERM,
+ or SIGPIPE, and
+ additionally, exit statuses and signals
+ specified in SuccessExitStatus=.
+ If set to ,
+ the service will be restarted when the
+ process exits with a non-zero exit code,
+ is terminated by a signal (including on
+ core dump), when an operation (such as
+ service reload) times out, and when the
+ configured watchdog timeout is triggered.
+ If set to
+ , the service
+ will be restarted only if the service
+ process exits due to an uncaught
+ signal not specified as a clean exit
+ status.
+ If set to
+ , the service
+ will be restarted only if the watchdog
+ timeout for the service expires.
+ If set to
+ , the service
+ will be restarted regardless of whether
+ it exited cleanly or not, got
+ terminated abnormally by a signal, or
+ hit a timeout.
+
+ In addition to the above settings,
+ the service will not be restarted if the
+ exit code or signal is specified in
+ RestartPreventExitStatus=
+ (see below).
+
+
+
+ SuccessExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will be
+ considered successful termination, in
+ addition to the normal successful exit
+ code 0 and the signals SIGHUP, SIGINT,
+ SIGTERM, and SIGPIPE. Exit status
+ definitions can either be numeric exit
+ codes or termination signal names,
+ separated by spaces. For example:
+ SuccessExitStatus=1 2 8 SIGKILL
+ ensures that exit codes 1, 2, 8 and
+ the termination signal
+ SIGKILL are
+ considered clean service terminations.
+
+
+ Note that if a process has a
+ signal handler installed and exits by
+ calling
+ _exit2
+ in response to a signal, the
+ information about the signal is lost.
+ Programs should instead perform cleanup and kill themselves with the same signal instead. See
+ Proper handling of SIGINT/SIGQUIT â How to be a proper program.
+
+ This option may appear more than once,
+ in which case the list of successful
+ exit statuses is merged. If the empty
+ string is assigned to this option, the
+ list is reset, all prior assignments
+ of this option will have no
+ effect.
+
+
+
+ RestartPreventExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will
+ prevent automatic service restarts,
+ regardless of the restart setting
+ configured with
+ Restart=. Exit
+ status definitions can either be
+ numeric exit codes or termination
+ signal names, and are separated by
+ spaces. Defaults to the empty list, so
+ that, by default, no exit status is
+ excluded from the configured restart
+ logic. Example:
+ RestartPreventExitStatus=1 6
+ SIGABRT, ensures that exit
+ codes 1 and 6 and the termination
+ signal SIGABRT will
+ not result in automatic service
+ restarting. This
+ option may appear more than once, in
+ which case the list of restart-preventing
+ statuses is merged. If the empty
+ string is assigned to this option, the
+ list is reset and all prior assignments
+ of this option will have no
+ effect.PermissionsStartOnly=Takes a boolean
- argument. If true, the permission
- related execution options as
+ argument. If true, the permission-related
+ execution options, as
configured with
User= and similar
options (see
systemd.exec5
- for more information) are only applied
+ for more information), are only applied
to the process started with
ExecStart=, and not
to the various other
ExecStartPre=,
ExecStartPost=,
ExecReload=,
- ExecStop=,
+ ExecStop=, and
ExecStopPost=
commands. If false, the setting is
applied to all configured commands the
@@ -472,19 +831,19 @@
RootDirectoryStartOnly=Takes a boolean
- argument. If true, the root directory
+ argument. If true, the root directory,
as configured with the
RootDirectory=
option (see
systemd.exec5
- for more information) is only applied
+ for more information), is only applied
to the process started with
ExecStart=, and not
to the various other
ExecStartPre=,
ExecStartPost=,
ExecReload=,
- ExecStop=,
+ ExecStop=, and
ExecStopPost=
commands. If false, the setting is
applied to all configured commands the
@@ -492,84 +851,16 @@
false.
-
- SysVStartPriority=
- Set the SysV start
- priority to use to order this service
- in relation to SysV services lacking
- LSB headers. This option is only
- necessary to fix ordering in relation
- to legacy SysV services, that have no
- ordering information encoded in the
- script headers. As such it should only
- be used as temporary compatibility
- option, and not be used in new unit
- files. Almost always it is a better
- choice to add explicit ordering
- directives via
- After= or
- Before=,
- instead. For more details see
- systemd.unit5. If
- used, pass an integer value in the
- range 0-99.
-
-
-
- KillMode=
- Specifies how
- processes of this service shall be
- killed. One of
- ,
- ,
- ,
- .
-
- If set to
- all
- remaining processes in the control
- group of this service will be
- terminated on service stop, after the
- stop command (as configured with
- ExecStop=) is
- executed. If set to
- only
- the members of the process group of
- the main service process are
- killed. If set to
- only the main
- process itself is killed. If set to
- no process is
- killed. In this case only the stop
- command will be executed on service
- stop, but no process be killed
- otherwise. Processes remaining alive
- after stop are left in their control
- group and the control group continues
- to exist after stop unless it is
- empty. Defaults to
- .
-
- Processes will first be
- terminated via SIGTERM. If then after
- a delay (configured via the
- TimeoutSec= option)
- processes still remain, the
- termination request is repeated with
- the SIGKILL signal. See
- kill2
- for more
- information.
-
-
NonBlocking=
- Set O_NONBLOCK flag
+ Set the
+ O_NONBLOCK flag
for all file descriptors passed via
socket-based activation. If true, all
file descriptors >= 3 (i.e. all except
- STDIN/STDOUT/STDERR) will have
- the O_NONBLOCK flag set and hence are in
+ stdin, stdout, and stderr) will have
+ the O_NONBLOCK flag
+ set and hence are in
non-blocking mode. This option is only
useful in conjunction with a socket
unit, as described in
@@ -587,21 +878,186 @@
(the default),
or
. If
- no daemon status
- updates are accepted by the service
+ , no daemon status
+ updates are accepted from the service
processes, all status update messages
- are ignored. If
+ are ignored. If ,
only service updates sent from the
main process of the service are
- accepted. If all
+ accepted. If , all
services updates from all members of
the service's control group are
- accepted. This option must be set to
+ accepted. This option should be set to
open access to the notification socket
when using
- Type=notify (see above).
+ Type=notify or
+ WatchdogSec= (see
+ above). If those options are used but
+ NotifyAccess= is not
+ configured, it will be implicitly set
+ to
+ .
+
+ Sockets=
+ Specifies the name of
+ the socket units this service shall
+ inherit the sockets from when the
+ service is started. Normally it
+ should not be necessary to use this
+ setting as all sockets whose unit
+ shares the same name as the service
+ (ignoring the different suffix of course)
+ are passed to the spawned
+ process.
+
+ Note that the same socket may be
+ passed to multiple processes at the
+ same time. Also note that a different
+ service may be activated on incoming
+ traffic than that which inherits the
+ sockets. Or in other words: the
+ Service= setting of
+ .socket units
+ does not have to match the inverse of
+ the Sockets=
+ setting of the
+ .service it
+ refers to.
+
+ This option may appear more than
+ once, in which case the list of socket
+ units is merged. If the empty string
+ is assigned to this option, the list of
+ sockets is reset, and all prior uses of
+ this setting will have no
+ effect.
+
+
+
+ StartLimitInterval=
+ StartLimitBurst=
+
+ Configure service
+ start rate limiting. By default,
+ services which are started more
+ than 5 times within 10 seconds are not
+ permitted to start any more times
+ until the 10 second interval ends. With
+ these two options, this rate limiting
+ may be modified. Use
+ StartLimitInterval=
+ to configure the checking interval (defaults to
+ DefaultStartLimitInterval= in
+ manager configuration file, set to 0 to disable
+ any kind of rate limiting). Use
+ StartLimitBurst= to
+ configure how many starts per interval
+ are allowed (defaults to
+ DefaultStartLimitBurst= in
+ manager configuration file). These
+ configuration options are particularly
+ useful in conjunction with
+ Restart=; however,
+ they apply to all kinds of starts
+ (including manual), not just those
+ triggered by the
+ Restart= logic.
+ Note that units which are configured
+ for Restart= and
+ which reach the start limit are not
+ attempted to be restarted anymore;
+ however, they may still be restarted
+ manually at a later point, from which
+ point on, the restart logic is again
+ activated. Note that
+ systemctl
+ reset-failed will cause the
+ restart rate counter for a service to
+ be flushed, which is useful if the
+ administrator wants to manually start
+ a service and the start limit
+ interferes with
+ that.
+
+
+
+ StartLimitAction=
+
+ Configure the action
+ to take if the rate limit configured
+ with
+ StartLimitInterval=
+ and
+ StartLimitBurst= is
+ hit. Takes one of
+ ,
+ ,
+ , or
+ . If
+ is set,
+ hitting the rate limit will trigger no
+ action besides that the start will not
+ be permitted.
+ causes a reboot following the normal
+ shutdown procedure (i.e. equivalent to
+ systemctl reboot).
+ causes
+ a forced reboot which will terminate
+ all processes forcibly but should
+ cause no dirty file systems on reboot
+ (i.e. equivalent to systemctl
+ reboot -f) and
+
+ causes immediate execution of the
+ reboot2
+ system call, which might result in
+ data loss. Defaults to
+ .
+
+
+
+
+ Check
+ systemd.exec5
+ and
+ systemd.kill5
+ for more settings.
+
+
+
+
+ Compatibility Options
+
+ The following options are also available in the
+ [Service] section, but exist purely
+ for compatibility reasons and should not be used in
+ newly written service files.
+
+
+
+ SysVStartPriority=
+ Set the SysV start
+ priority to use to order this service
+ in relation to SysV services lacking
+ LSB headers. This option is only
+ necessary to fix ordering in relation
+ to legacy SysV services that have no
+ ordering information encoded in the
+ script headers. As such, it should only
+ be used as a temporary compatibility
+ option and should not be used in new unit
+ files. Almost always, it is a better
+ choice to add explicit ordering
+ directives via
+ After= or
+ Before=,
+ instead. For more details, see
+ systemd.unit5.
+ If used, pass an integer value in the
+ range 0-99.
+
@@ -611,7 +1067,10 @@
systemd1,
systemctl8,
systemd.unit5,
- systemd.exec5
+ systemd.exec5,
+ systemd.resource-control5,
+ systemd.kill5,
+ systemd.directives7