X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.service.xml;h=258b059efa26b45f4a72ccfaf93d08642504c721;hb=643a14a5271ed19ec30a9882d4b9e9ae1c357fb1;hp=c9cd51f739dda1cd0da27273fc07f9fb0c3d3a5a;hpb=50caaedb2c416c8972f9b2f835a69a20c524e81e;p=elogind.git
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index c9cd51f73..258b059ef 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -9,16 +9,16 @@
Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see .
-->
@@ -180,7 +180,7 @@
acquired. Service units with this
option configured implicitly gain
dependencies on the
- dbus.target
+ dbus.socket
unit.
Behaviour of
@@ -198,8 +198,8 @@
below) should be set to open access to
the notification socket provided by
systemd. If
- NotifyAccess= is not
- set, it will implicitly be set to
+ NotifyAccess= is
+ not set, it will be implicitly set to
.
@@ -215,6 +215,30 @@
+
+ GuessMainPID=
+
+ Takes a boolean value
+ that specifies whether systemd should
+ try to guess the main PID of a service
+ should if it cannot be determined
+ reliably. This option is ignored
+ unless
+ is set and
+ is unset because for the other types
+ or with an explicitly configured PID
+ file the main PID is always known. The
+ guessing algorithm might come to
+ incorrect conclusions if a daemon
+ consists of more than one process. If
+ the main PID cannot be determined
+ failure detection and automatic
+ restarting of a service will not work
+ reliably. Defaults to
+ .
+
+
+
PIDFile=
@@ -223,7 +247,11 @@
daemon. Use of this option is
recommended for services where
Type= is set to
- .
+ . systemd will
+ read the PID of the main process of
+ the daemon after start-up of the
+ service. systemd will not write to the
+ file configured here.
@@ -271,11 +299,11 @@
- an exit code of
the command normally considered a
failure (i.e. non-zero exit status or
- abormal exit due to signal) is ignored
+ abnormal exit due to signal) is ignored
and considered success. If both
- and
@ are used for the
- same command the former must preceed
+ same command the former must precede
the latter. Unless
Type=forking is
set, the process started via this
@@ -283,20 +311,28 @@
main process of the daemon. The
command line accepts % specifiers as
described in
- systemd.unit5. On
- top of that basic environment variable
- substitution is supported, where
- ${FOO} is replaced
- by the string value of the environment
- variable of the same name. Also
- $FOO may appear as
- separate word on the command line in
- which case the variable is replaced by
- its value split at whitespaces. Note
- that the first argument (i.e. the
- binary to execute) may not be a
- variable, and must be a literal and
- absolute path name.
+ systemd.unit5.
+
+ On top of that basic environment
+ variable substitution is
+ supported. Use
+ ${FOO} as part of a
+ word, or as word of its own on the
+ command line, in which case it will be
+ replaced by the value of the
+ environment variable including all
+ whitespace it contains, resulting in a
+ single argument. Use
+ $FOO as a separate
+ word on the command line, in which
+ case it will be replaced by the value
+ of the environment variable split up
+ at whitespace, resulting in no or more
+ arguments. Note that the first
+ argument (i.e. the program to execute)
+ may not be a variable, and must be a
+ literal and absolute path
+ name.
@@ -314,7 +350,7 @@
after the other,
serially. Alternatively, these
directives may be specified more than
- once whith the same effect. However,
+ once with the same effect. However,
the latter syntax is not recommended
for compatibility with parsers
suitable for XDG
@@ -344,7 +380,7 @@
daemon, and may be used for command
lines like the following:
/bin/kill -HUP
- $(MAINPID).
+ $MAINPID.
@@ -368,7 +404,7 @@
requested. Specifier and environment
variable substitution is supported
(including
- $(MAINPID), see
+ $MAINPID, see
above).
@@ -420,14 +456,46 @@
time span value such as "5min
20s". Pass 0 to disable the timeout
logic. Defaults to
- 60s.
+ 90s.
+
+
+
+ WatchdogSec=
+ Configures the
+ watchdog timeout for a service. This
+ is activated when the start-up is
+ completed. The service must call
+ sd_notify3
+ regularly with "WATCHDOG=1". If the
+ time between two such calls is larger
+ than the configured time then the
+ service is placed in a failure
+ state. By setting
+ Restart=
+ to or
+ the service
+ will be automatically restarted. The
+ time configured here will be passed to
+ the executed service process in the
+ WATCHDOG_USEC=
+ environment variable. If
+ this option is used
+ NotifyAccess= (see
+ below) should be set to open access to
+ the notification socket provided by
+ systemd. If
+ NotifyAccess= is not
+ set, it will be implicitly set to
+ . Defaults to 0,
+ which disables this
+ feature.Restart=Configures whether the
main service process shall be
- restarted when it exists. Takes one of
+ restarted when it exits. Takes one of
,
,
,
@@ -441,17 +509,20 @@
i.e. terminated with an exit code of
0. If set to
it will be
- restared only when it exited with an
- exit code not equalling 0, or when
- terminated by a signal. If set to
+ restarted only when it exited with an
+ exit code not equalling 0, when
+ terminated by a signal, when an
+ operation times out or when the
+ configured watchdog timeout is
+ triggered. If set to
it will be
restarted only if it exits due to
reception of an uncaught signal. If
set to the
service will be restarted regardless
- whether it exited cleanly or not, or
+ whether it exited cleanly or not,
got terminated abnormally by a
- signal.
+ signal or hit a timeout.
@@ -530,7 +601,6 @@
processes of this service shall be
killed. One of
,
- ,
,
.
@@ -542,10 +612,6 @@
stop command (as configured with
ExecStop=) is
executed. If set to
- only
- the members of the process group of
- the main service process are
- killed. If set to
only the main
process itself is killed. If set to
no process is
@@ -557,20 +623,44 @@
group and the control group continues
to exist after stop unless it is
empty. Defaults to
- .
+ .
Processes will first be
- terminated via SIGTERM. If then after
- a delay (configured via the
+ terminated via SIGTERM (unless the
+ signal to send is changed via
+ KillSignal=). If
+ then after a delay (configured via the
TimeoutSec= option)
processes still remain, the
termination request is repeated with
- the SIGKILL signal. See
+ the SIGKILL signal (unless this is
+ disabled via the
+ SendSIGKILL=
+ option). See
kill2
for more
information.
+
+ KillSignal=
+ Specifies which signal
+ to use when killing a
+ service. Defaults to SIGTERM.
+
+
+
+
+ SendSIGKILL=
+ Specifies whether to
+ send SIGKILL to remaining processes
+ after a timeout, if the normal
+ shutdown procedure left processes of
+ the service around. Takes a boolean
+ value. Defaults to "yes".
+
+
+
NonBlocking=Set O_NONBLOCK flag
@@ -597,7 +687,7 @@
or
. If
no daemon status
- updates are accepted by the service
+ updates are accepted from the service
processes, all status update messages
are ignored. If
only service updates sent from the
@@ -605,10 +695,16 @@
accepted. If all
services updates from all members of
the service's control group are
- accepted. This option must be set to
+ accepted. This option should be set to
open access to the notification socket
when using
- Type=notify (see above).
+ Type=notify or
+ WatchdogUsec= (see
+ above). If those options are used but
+ NotifyAccess= not
+ configured it will be implicitly set
+ to
+ .
@@ -616,11 +712,11 @@
Specifies the name of
the socket units this service shall
inherit the sockets from when the
- service (ignoring the different suffix
- of course) is started. Normally it
+ service is started. Normally it
should not be necessary to use this
setting as all sockets whose unit
shares the same name as the service
+ (ignoring the different suffix of course)
are passed to the spawned
process.
@@ -638,6 +734,93 @@
refers to.
+
+ FsckPassNo=
+ Set the fsck passno
+ priority to use to order this service
+ in relation to other file system
+ checking services. This option is only
+ necessary to fix ordering in relation
+ to fsck jobs automatically created for
+ all /etc/fstab
+ entries with a value in the fs_passno
+ column > 0. As such it should only be
+ used as option for fsck
+ services. Almost always it is a better
+ choice to add explicit ordering
+ directives via
+ After= or
+ Before=,
+ instead. For more details see
+ systemd.unit5. If
+ used, pass an integer value in the
+ same range as
+ /etc/fstab's
+ fs_passno column. See
+ fstab5
+ for details.
+
+
+
+ StartLimitInterval=
+ StartLimitBurst=
+
+ Configure service
+ start rate limiting. By default
+ services which are started more often
+ than 5 times within 10s are not
+ permitted to start any more times
+ until the 10s interval ends. With
+ these two options this rate limiting
+ may be modified. Use
+ StartLimitInterval=
+ to configure the checking interval
+ (defaults to 10s, set to 0 to disable
+ any kind of rate limiting). Use
+ StartLimitBurst= to
+ configure how many starts per interval
+ are allowed (defaults to 5). These
+ configuration options are particularly
+ useful in conjunction with
+ Restart=.
+
+
+
+ StartLimitAction=
+
+ Configure the action
+ to take if the rate limit configured
+ with
+ StartLimitInterval=
+ and
+ StartLimitBurst= is
+ hit. Takes one of
+ ,
+ ,
+ or
+ . If
+ is set,
+ hitting the rate limit will trigger no
+ action besides that the start will not
+ be
+ permitted.
+ causes a reboot following the normal
+ shutdown procedure (i.e. equivalent to
+ systemctl reboot),
+ causes
+ an forced reboot which will terminate
+ all processes forcibly but should
+ cause no dirty file systems on reboot
+ (i.e. equivalent to systemctl
+ reboot -f) and
+
+ causes immediate execution of the
+ reboot2
+ system call, which might result in
+ data loss. Defaults to
+ .
+
+