X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemd.service.xml;h=238a49a2512c610910b27b6c01369b487839f5f9;hb=3e2f69b779aa0f3466ebb45837e8507baa0832f7;hp=5285ce3d52157e20723bc594e78dc575de5f21bd;hpb=d1ab0ca07372649dad70a0348d75e394f254e1b6;p=elogind.git
diff --git a/man/systemd.service.xml b/man/systemd.service.xml
index 5285ce3d5..238a49a25 100644
--- a/man/systemd.service.xml
+++ b/man/systemd.service.xml
@@ -9,16 +9,16 @@
Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see .
-->
@@ -44,169 +44,962 @@
systemd.service
- systemd service configuration files
+ Service unit configuration
- systemd.service
+ service.serviceDescription
- A configuration file ending in .service encodes
- information about a process controlled and supervised
- by systemd.
+ A unit configuration file whose name ends in
+ .service encodes information
+ about a process controlled and supervised by
+ systemd.This man page lists the configuration options
specific to this unit type. See
systemd.unit5
for the common options of all unit configuration
- files.
+ files. The common configuration items are configured
+ in the generic [Unit] and
+ [Install] sections. The service
+ specific configuration options are configured in the
+ [Service] section.
+
+ Additional options are listed in
+ systemd.exec5,
+ which define the execution environment the commands
+ are executed in, and in
+ systemd.kill5,
+ which define the way the processes of the service are
+ terminated, and in
+ systemd.cgroup5,
+ which configure control group settings for the
+ processes of the service.
+
+ Unless DefaultDependencies=
+ is set to , service units will
+ implicitly have dependencies of type
+ Requires= and
+ After= on
+ basic.target as well as
+ dependencies of type Conflicts= and
+ Before= on
+ shutdown.target. These ensure
+ that normal service units pull in basic system
+ initialization, and are terminated cleanly prior to
+ system shutdown. Only services involved with early
+ boot or late system shutdown should disable this
+ option.
+
+ If a service is requested under a certain name
+ but no unit configuration file is found, systemd looks
+ for a SysV init script by the same name (with the
+ .service suffix removed) and
+ dynamically creates a service unit from that
+ script. This is useful for compatibility with
+ SysV. Note that this compatibility is quite
+ comprehensive but not 100%. For details about the
+ incompatibilities see the Incompatibilities
+ with SysV document.
+ Options
-
+ Service files must include a
+ [Service] section, which carries
+ information about the service and the process it
+ supervises. A number of options that may be used in
+ this section are shared with other unit types. These
+ options are documented in
+ systemd.exec5
+ and
+ systemd.kill5. The
+ options specific to the [Service]
+ section of service units are the following:
+
+ Type=
-
- One of
- forking,
- simple,
- finish,
- dbus.
-
- If set to
- forking
- (the default) it is expected
- that the process configured
- with
- ExecStart=
- will start up and call
- fork(). The
- parent process is expected to
- finish when start-up is
- complete and all communication
- channels set up. The child
- continues to run as the main
- daemon process. This is the
- behaviour of traditional UNIX
- daemons. If this setting is
- used it is recommended to also
- use the
- PIDFile=
- option, so that systemd can
- identify the main process of
- the daemon. systemd will start
- follow-up units as soon as the
- parent process exited.
-
- If set to
- simple (the
- recommended value) it is
- expected that the process
- configured with
- ExecStart=
- is the main process of the
- daemon. In this mode
- communication channels must be
- available before the daemon is
- started up, as systemd will
- immediately start follow-up
- units.
-
- Behaviour of
- finish is
- similar to
- simple,
- however it is expected that
- the process has to exit before
- systemd starts follow-up
- units. ValidNoProcess=
- is particularly useful for
- this type of service.
-
- Behaviour of
- dbus is
- similar to
- simple,
- however it is expected that
- the daemon acquires a name on
- the D-Bus bus, as configured
- by
- BusName=. Follow-up
- units will be started after
- the name has been
- acquired.
+
+ Configures the process
+ start-up type for this service
+ unit. One of ,
+ ,
+ ,
+ ,
+ or
+ .
+
+ If set to
+ (the default
+ value if BusName=
+ is not specified) it is expected that
+ the process configured with
+ ExecStart= is the
+ main process of the service. In this
+ mode, if the process offers
+ functionality to other processes on
+ the system its communication channels
+ should be installed before the daemon
+ is started up (e.g. sockets set up by
+ systemd, via socket activation), as
+ systemd will immediately proceed
+ starting follow-up units.
+
+ If set to
+ it is
+ expected that the process configured
+ with ExecStart=
+ will call fork()
+ as part of its start-up. The parent process is
+ expected to exit when start-up is
+ complete and all communication
+ channels set up. The child continues
+ to run as the main daemon
+ process. This is the behavior of
+ traditional UNIX daemons. If this
+ setting is used, it is recommended to
+ also use the
+ PIDFile= option, so
+ that systemd can identify the main
+ process of the daemon. systemd will
+ proceed starting follow-up units as
+ soon as the parent process
+ exits.
+
+ Behavior of
+ is similar
+ to , however
+ it is expected that the process has to
+ exit before systemd starts follow-up
+ units. RemainAfterExit=
+ is particularly useful for this type
+ of service.
+
+ Behavior of
+ is similar to
+ , however it is
+ expected that the daemon acquires a
+ name on the D-Bus bus, as configured
+ by
+ BusName=. systemd
+ will proceed starting follow-up units
+ after the D-Bus bus name has been
+ acquired. Service units with this
+ option configured implicitly gain
+ dependencies on the
+ dbus.socket
+ unit. This type is the default if
+ BusName= is
+ specified.
+
+ Behavior of
+ is similar to
+ , however it is
+ expected that the daemon sends a
+ notification message via
+ sd_notify3
+ or an equivalent call when it finished
+ starting up. systemd will proceed
+ starting follow-up units after this
+ notification message has been sent. If
+ this option is used
+ NotifyAccess= (see
+ below) should be set to open access to
+ the notification socket provided by
+ systemd. If
+ NotifyAccess= is
+ not set, it will be implicitly set to
+ .
+
+ Behavior of
+ is very similar
+ to , however
+ actual execution of the service
+ binary is delayed until all jobs are
+ dispatched. This may be used to avoid
+ interleaving of output of shell
+ services with the status output on the
+ console.
+
+
+
+
+ RemainAfterExit=
+
+ Takes a boolean value
+ that specifies whether the service
+ shall be considered active even when
+ all its processes exited. Defaults to
+ .
+
- ValidNoProcess=
-
- Takes a boolean value
- that specifies whether the service
- shall be considered active
- even when all its processes
- exited. Defaults to no.
+ GuessMainPID=
+
+ Takes a boolean value
+ that specifies whether systemd should
+ try to guess the main PID of a service
+ if it cannot be determined
+ reliably. This option is ignored
+ unless
+ is set and
+ is unset because for the other types
+ or with an explicitly configured PID
+ file the main PID is always known. The
+ guessing algorithm might come to
+ incorrect conclusions if a daemon
+ consists of more than one process. If
+ the main PID cannot be determined
+ failure detection and automatic
+ restarting of a service will not work
+ reliably. Defaults to
+ .PIDFile=
-
- Takes an absolute file
- name pointing to the PID file
- of this daemon. Use of this
- option is recommended for
- services where
- Type= is
- set to
- forking.
+
+ Takes an absolute file
+ name pointing to the PID file of this
+ daemon. Use of this option is
+ recommended for services where
+ Type= is set to
+ . systemd will
+ read the PID of the main process of
+ the daemon after start-up of the
+ service. systemd will not write to the
+ file configured here.BusName=
-
- Takes a D-Bus bus name
- that this service is reachable
- as. This option is mandatory
- for services where
- Type= is
- set to
- dbus, but
- its use is otherwise
- recommended as well if the
- process takes a name on the
- D-Bus bus.
+
+ Takes a D-Bus bus
+ name, that this service is reachable
+ as. This option is mandatory for
+ services where
+ Type= is set to
+ , but its use
+ is otherwise recommended as well if
+ the process takes a name on the D-Bus
+ bus.ExecStart=
-
- Takes a command line
- that is executed when this
- service shall be started
- up. The first word of the
- command line must be an
- absolute file name. It is
- mandatory to set this option
- for all services.
+ Commands with their
+ arguments that are executed when this
+ service is started. The first
+ argument must be an absolute path
+ name.
+
+ When Type is
+ not , only one
+ command may be given. When
+ Type=oneshot is
+ used, more than one command may be
+ specified. Multiple command lines may
+ be concatenated in a single directive,
+ by separating them with semicolons
+ (these semicolons must be passed as
+ separate words). Alternatively, this
+ directive may be specified more than
+ once with the same effect. However,
+ the latter syntax is not recommended
+ for compatibility with parsers
+ suitable for XDG
+ .desktop files.
+ Lone semicolons may be escaped as
+ \;. If the empty
+ string is assigned to this option the
+ list of commands to start is reset,
+ prior assignments of this option will
+ have no effect.
+
+ If more than one command is
+ specified, the commands are invoked
+ one by one sequentially in the order
+ they appear in the unit file. If one
+ of the commands fails (and is not
+ prefixed with -),
+ other lines are not executed and the
+ unit is considered failed.
+
+ Unless
+ Type=forking is
+ set, the process started via this
+ command line will be considered the
+ main process of the daemon.
+
+ The command line accepts
+ % specifiers as
+ described in
+ systemd.unit5. Note
+ that the first argument of the command
+ line (i.e. the program to execute) may
+ not include specifiers.
+
+ Basic environment variable
+ substitution is supported. Use
+ ${FOO} as part of a
+ word, or as a word of its own on the
+ command line, in which case it will be
+ replaced by the value of the
+ environment variable including all
+ whitespace it contains, resulting in a
+ single argument. Use
+ $FOO as a separate
+ word on the command line, in which
+ case it will be replaced by the value
+ of the environment variable split up
+ at whitespace, resulting in zero or
+ more arguments. Note that the first
+ argument (i.e. the program to execute)
+ may not be a variable, since it must
+ be a literal and absolute path
+ name.
+
+ Optionally, if the absolute file
+ name is prefixed with
+ @, the second token
+ will be passed as
+ argv[0] to the
+ executed process, followed by the
+ further arguments specified. If the
+ absolute filename is prefixed with
+ - an exit code of
+ the command normally considered a
+ failure (i.e. non-zero exit status or
+ abnormal exit due to signal) is ignored
+ and considered success. If both
+ - and
+ @ are used they
+ can appear in either order.
+
+ Note that this setting does not
+ directly support shell command
+ lines. If shell command lines are to
+ be used they need to be passed
+ explicitly to a shell implementation
+ of some kind. Example:
+ ExecStart=/bin/sh -c 'dmesg | tac'
+
+
+ For services run by a user
+ instance of systemd the special
+ environment variable
+ $MANAGERPID is set
+ to the PID of the systemd
+ instance.
+
+ ExecStartPre=
+ ExecStartPost=
+ Additional commands
+ that are executed before or after
+ the command in
+ ExecStart=, respectively.
+ Syntax is the same as for
+ ExecStart=, except
+ that multiple command lines are allowed
+ and the commands are executed one
+ after the other, serially.
+
+ If any of those commands (not
+ prefixed with -)
+ fail, the rest are not executed and
+ the unit is considered failed.
+
+
+
+
+ ExecReload=
+ Commands to execute to
+ trigger a configuration reload in the
+ service. This argument takes multiple
+ command lines, following the same
+ scheme as described for
+ ExecStart=
+ above. Use of this setting is
+ optional. Specifier and environment
+ variable substitution is supported
+ here following the same scheme as for
+ ExecStart=.
+
+ One additional special
+ environment variables is set: if known
+ $MAINPID is set to
+ the main process of the daemon, and
+ may be used for command lines like the
+ following:
+
+ /bin/kill -HUP $MAINPID
+
+
+
+
+ ExecStop=
+ Commands to execute to
+ stop the service started via
+ ExecStart=. This
+ argument takes multiple command lines,
+ following the same scheme as described
+ for ExecStart=
+ above. Use of this setting is
+ optional. All processes remaining for
+ a service after the commands
+ configured in this option are run are
+ terminated according to the
+ KillMode= setting
+ (see
+ systemd.kill5). If
+ this option is not specified the
+ process is terminated right-away when
+ service stop is requested. Specifier
+ and environment variable substitution
+ is supported (including
+ $MAINPID, see
+ above).
+
+
+
+ ExecStopPost=
+ Additional commands
+ that are executed after the service
+ was stopped. This includes cases where
+ the commands configured in
+ ExecStop= were used,
+ where the service doesn't have any
+ ExecStop= defined, or
+ where the service exited unexpectedly. This
+ argument takes multiple command lines,
+ following the same scheme as described
+ for ExecStart. Use
+ of these settings is
+ optional. Specifier and environment
+ variable substitution is
+ supported.
+
+
+
+ RestartSec=
+ Configures the time to
+ sleep before restarting a service (as
+ configured with
+ Restart=). Takes a
+ unit-less value in seconds, or a time
+ span value such as "5min
+ 20s". Defaults to
+ 100ms.
+
+
+
+ TimeoutStartSec=
+ Configures the time to
+ wait for start-up. If a
+ daemon service does not signal
+ start-up completion within the
+ configured time, the service will be
+ considered failed and be shut down
+ again.
+ Takes a unit-less value in seconds, or a
+ time span value such as "5min
+ 20s". Pass 0 to disable the timeout
+ logic. Defaults to 90s, except when
+ Type=oneshot is
+ used in which case the timeout
+ is disabled by default.
+
+
+
+
+ TimeoutStopSec=
+ Configures the time to
+ wait for stop. If a service is asked
+ to stop but does not terminate in the
+ specified time, it will be terminated
+ forcibly via SIGTERM, and after
+ another delay of this time with
+ SIGKILL (See
+ KillMode=
+ in systemd.kill5).
+ Takes a unit-less value in seconds, or a
+ time span value such as "5min
+ 20s". Pass 0 to disable the timeout
+ logic. Defaults to 90s.
+
+
+
+
+ TimeoutSec=
+ A shorthand for configuring
+ both TimeoutStartSec=
+ and TimeoutStopSec=
+ to the specified value.
+
+
+
+
+ WatchdogSec=
+ Configures the
+ watchdog timeout for a service. The
+ watchdog is activated when the start-up is
+ completed. The service must call
+ sd_notify3
+ regularly with "WATCHDOG=1" (i.e. the
+ "keep-alive ping"). If the time
+ between two such calls is larger than
+ the configured time then the service
+ is placed in a failure state. By
+ setting Restart= to
+ or
+ the service
+ will be automatically restarted. The
+ time configured here will be passed to
+ the executed service process in the
+ WATCHDOG_USEC=
+ environment variable. This allows
+ daemons to automatically enable the
+ keep-alive pinging logic if watchdog
+ support is enabled for the service. If
+ this option is used
+ NotifyAccess= (see
+ below) should be set to open access to
+ the notification socket provided by
+ systemd. If
+ NotifyAccess= is
+ not set, it will be implicitly set to
+ . Defaults to 0,
+ which disables this
+ feature.
+
+
+
+ Restart=
+ Configures whether the
+ service shall be restarted when the
+ service process exits, is killed,
+ or a timeout is reached. The service
+ process may be the main service
+ process, but also one of the processes
+ specified with
+ ExecStartPre=,
+ ExecStartPost=,
+ ExecStopPre=,
+ ExecStopPost=, or
+ ExecReload=.
+ When the death of the process is a
+ result of systemd operation (e.g. service
+ stop or restart), the service will not be
+ restarted. Timeouts include missing
+ the watchdog "keep-alive ping"
+ deadline and a service start, reload,
+ and stop operation timeouts.
+
+ Takes one of
+ ,
+ ,
+ ,
+ , or
+ . If set to
+ (the default) the
+ service will not be restarted. If set to
+ it will be
+ restarted only when the service process
+ exits cleanly.
+ In this context, a clean exit means
+ an exit code of 0, or one of the signals
+ SIGHUP, SIGINT, SIGTERM, or SIGPIPE, and
+ additionally, exit statuses and signals
+ specified in SuccessExitStatus=.
+ If set to
+ the service will be restarted when the
+ process exits with an nonzero exit code,
+ is terminated by a signal (including on
+ core dump), when an operation (such as
+ service reload) times out, and when the
+ configured watchdog timeout is triggered.
+ If set to
+ the service
+ will be restarted only if the service
+ process exits due to an uncaught
+ signal not specified as a clean exit
+ status.
+ If set to
+ the service
+ will be restarted regardless whether
+ it exited cleanly or not, got
+ terminated abnormally by a signal or
+ hit a timeout.
+
+ In addition to the above settings,
+ the service will not be restarted if the
+ exit code or signal is specified in
+ RestartPreventExitStatus=
+ (see below).
+
+
+
+ SuccessExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will be
+ considered successful termination, in
+ addition to the normal successful exit
+ code 0 and the signals SIGHUP, SIGINT,
+ SIGTERM and SIGPIPE. Exit status
+ definitions can either be numeric exit
+ codes or termination signal names,
+ separated by spaces. Example:
+ SuccessExitStatus=1 2 8
+ SIGKILL, ensures that exit
+ codes 1, 2, 8 and the termination
+ signal SIGKILL are considered clean
+ service terminations. This option may
+ appear more than once in which case
+ the list of successful exit statuses
+ is merged. If the empty string is
+ assigned to this option the list is
+ reset, all prior assignments of this
+ option will have no
+ effect.
+
+
+
+ RestartPreventExitStatus=
+ Takes a list of exit
+ status definitions that when returned
+ by the main service process will
+ prevent automatic service restarts
+ regardless of the restart setting
+ configured with
+ Restart=. Exit
+ status definitions can either be
+ numeric exit codes or termination
+ signal names, and are separated by
+ spaces. Defaults to the empty list, so
+ that by default no exit status is
+ excluded from the configured restart
+ logic. Example:
+ RestartPreventExitStatus=1 6
+ SIGABRT, ensures that exit
+ codes 1 and 6 and the termination
+ signal SIGABRT will not result in
+ automatic service restarting. This
+ option may appear more than once in
+ which case the list of restart preventing
+ statuses is merged. If the empty
+ string is assigned to this option the
+ list is reset, all prior assignments
+ of this option will have no
+ effect.
+
+
+
+ PermissionsStartOnly=
+ Takes a boolean
+ argument. If true, the permission
+ related execution options as
+ configured with
+ User= and similar
+ options (see
+ systemd.exec5
+ for more information) are only applied
+ to the process started with
+ ExecStart=, and not
+ to the various other
+ ExecStartPre=,
+ ExecStartPost=,
+ ExecReload=,
+ ExecStop=,
+ ExecStopPost=
+ commands. If false, the setting is
+ applied to all configured commands the
+ same way. Defaults to
+ false.
+
+
+
+ RootDirectoryStartOnly=
+ Takes a boolean
+ argument. If true, the root directory
+ as configured with the
+ RootDirectory=
+ option (see
+ systemd.exec5
+ for more information) is only applied
+ to the process started with
+ ExecStart=, and not
+ to the various other
+ ExecStartPre=,
+ ExecStartPost=,
+ ExecReload=,
+ ExecStop=,
+ ExecStopPost=
+ commands. If false, the setting is
+ applied to all configured commands the
+ same way. Defaults to
+ false.
+
+
+
+ NonBlocking=
+ Set O_NONBLOCK flag
+ for all file descriptors passed via
+ socket-based activation. If true, all
+ file descriptors >= 3 (i.e. all except
+ STDIN/STDOUT/STDERR) will have
+ the O_NONBLOCK flag set and hence are in
+ non-blocking mode. This option is only
+ useful in conjunction with a socket
+ unit, as described in
+ systemd.socket5. Defaults
+ to false.
+
+
+
+ NotifyAccess=
+ Controls access to the
+ service status notification socket, as
+ accessible via the
+ sd_notify3
+ call. Takes one of
+ (the default),
+ or
+ . If
+ no daemon status
+ updates are accepted from the service
+ processes, all status update messages
+ are ignored. If
+ only service updates sent from the
+ main process of the service are
+ accepted. If all
+ services updates from all members of
+ the service's control group are
+ accepted. This option should be set to
+ open access to the notification socket
+ when using
+ Type=notify or
+ WatchdogSec= (see
+ above). If those options are used but
+ NotifyAccess= not
+ configured it will be implicitly set
+ to
+ .
+
+
+
+ Sockets=
+ Specifies the name of
+ the socket units this service shall
+ inherit the sockets from when the
+ service is started. Normally it
+ should not be necessary to use this
+ setting as all sockets whose unit
+ shares the same name as the service
+ (ignoring the different suffix of course)
+ are passed to the spawned
+ process.
+
+ Note that the same socket may be
+ passed to multiple processes at the
+ same time. Also note that a different
+ service may be activated on incoming
+ traffic than inherits the sockets. Or
+ in other words: the
+ Service= setting of
+ .socket units
+ doesn't have to match the inverse of
+ the Sockets=
+ setting of the
+ .service it
+ refers to.
+
+ This option may appear more than
+ once, in which case the list of socket
+ units is merged. If the empty string
+ is assigned to this option the list of
+ sockets is reset, all prior uses of
+ this setting will have no
+ effect.
+
+
+
+ StartLimitInterval=
+ StartLimitBurst=
+
+ Configure service
+ start rate limiting. By default
+ services which are started more often
+ than 5 times within 10s are not
+ permitted to start any more times
+ until the 10s interval ends. With
+ these two options this rate limiting
+ may be modified. Use
+ StartLimitInterval=
+ to configure the checking interval
+ (defaults to 10s, set to 0 to disable
+ any kind of rate limiting). Use
+ StartLimitBurst= to
+ configure how many starts per interval
+ are allowed (defaults to 5). These
+ configuration options are particularly
+ useful in conjunction with
+ Restart=, however
+ apply to all kinds of starts
+ (including manual), not just those
+ triggered by the
+ Restart= logic.
+ Note that units which are configured
+ for Restart= and
+ which reach the start limit are not
+ attempted to be restarted anymore,
+ however they may still be restarted
+ manually at a later point from which
+ point on the restart logic is again
+ activated. Note that
+ systemctl
+ reset-failed will cause the
+ restart rate counter for a service to
+ be flushed, which is useful if the
+ administrator wants to manually start
+ a service and the start limit
+ interferes with
+ that.
+
+
+
+ StartLimitAction=
+
+ Configure the action
+ to take if the rate limit configured
+ with
+ StartLimitInterval=
+ and
+ StartLimitBurst= is
+ hit. Takes one of
+ ,
+ ,
+ or
+ . If
+ is set,
+ hitting the rate limit will trigger no
+ action besides that the start will not
+ be
+ permitted.
+ causes a reboot following the normal
+ shutdown procedure (i.e. equivalent to
+ systemctl reboot),
+ causes
+ an forced reboot which will terminate
+ all processes forcibly but should
+ cause no dirty file systems on reboot
+ (i.e. equivalent to systemctl
+ reboot -f) and
+
+ causes immediate execution of the
+ reboot2
+ system call, which might result in
+ data loss. Defaults to
+ .
+
+
+
+
+ Check
+ systemd.exec5
+ and
+ systemd.kill5
+ for more settings.
+
+
+
+
+ Compatibility Options
+
+ The following options are also available in the
+ [Service] section, but exist purely
+ for compatibility reasons and should not be used in
+ newly written service files.
+
+
+
+ SysVStartPriority=
+ Set the SysV start
+ priority to use to order this service
+ in relation to SysV services lacking
+ LSB headers. This option is only
+ necessary to fix ordering in relation
+ to legacy SysV services, that have no
+ ordering information encoded in the
+ script headers. As such it should only
+ be used as temporary compatibility
+ option, and not be used in new unit
+ files. Almost always it is a better
+ choice to add explicit ordering
+ directives via
+ After= or
+ Before=,
+ instead. For more details see
+ systemd.unit5. If
+ used, pass an integer value in the
+ range 0-99.
+
+
+
+ FsckPassNo=
+ Set the fsck passno
+ priority to use to order this service
+ in relation to other file system
+ checking services. This option is only
+ necessary to fix ordering in relation
+ to fsck jobs automatically created for
+ all /etc/fstab
+ entries with a value in the fs_passno
+ column > 0. As such it should only be
+ used as option for fsck
+ services. Almost always it is a better
+ choice to add explicit ordering
+ directives via
+ After= or
+ Before=,
+ instead. For more details see
+ systemd.unit5. If
+ used, pass an integer value in the
+ same range as
+ /etc/fstab's
+ fs_passno column. See
+ fstab5
+ for details.
+
+
See Also
- systemd8,
- systemctl8
- systemd.unit5
+ systemd1,
+ systemctl8,
+ systemd.unit5,
+ systemd.exec5,
+ systemd.cgroup5,
+ systemd.kill5,
+ systemd.directives7