X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemctl.xml;h=a8d15b5f69cb71de53ba5eb85c40e810950859e2;hb=31a339fd7f0e87376bade9ebd7ae32c58d34cf85;hp=d454df6477e5264fa073703193f045e321404001;hpb=e213d1a3c3dd0b6a39790c2fbd46d3bcfc683c46;p=elogind.git
diff --git a/man/systemctl.xml b/man/systemctl.xml
index d454df647..a8d15b5f6 100644
--- a/man/systemctl.xml
+++ b/man/systemctl.xml
@@ -21,7 +21,8 @@ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see .
-->
-
+systemctl
@@ -71,22 +72,6 @@ along with systemd; If not, see .
The following options are understood:
-
-
-
-
- Prints a short help
- text and exits.
-
-
-
-
-
-
- Prints a short version string and exits.
-
-
-
@@ -146,6 +131,18 @@ along with systemd; If not, see .
+
+
+
+
+
+ When listing units, also show units of local
+ containers. Units of local containers will be prefixed with
+ the container name, separated by a single colon character
+ (:).
+
+
+
@@ -160,12 +157,27 @@ along with systemd; If not, see .
+
+
+ With list-dependencies, show the
+ units that are ordered before the specified unit. In other
+ words, list the units that are in the After=
+ directive of the specified unit, have the specified unit in
+ their Before= directive, or are otherwise
+ implicit dependencies of the specified unit.
+
+
+
+
- Show which units are started after or before
- with list-dependencies, respectively.
-
+ With list-dependencies, show the
+ units that are ordered after the specified unit. In other
+ words, list the units that are in the Before=
+ directive of the specified unit, have the specified unit in
+ their After= directive, or otherwise depend
+ on the specified unit.
@@ -174,10 +186,11 @@ along with systemd; If not, see .
- Do not ellipsize unit names, process tree entries, and
- truncate unit descriptions in the output of
- list-units and
- list-jobs.
+ Do not ellipsize unit names, process tree entries,
+ journal output, or truncate unit descriptions in the output
+ of status, list-units,
+ list-jobs, and
+ list-timers.
@@ -193,8 +206,8 @@ along with systemd; If not, see .
- When queuing a new job, control how to deal with already
- queued jobs. Takes one of fail,
+ When queuing a new job, this option controls how to deal with
+ already queued jobs. It takes one of fail,
replace,
replace-irreversibly,
isolate,
@@ -217,8 +230,10 @@ along with systemd; If not, see .
If replace-irreversibly is specified,
operate like replace, but also mark the new
jobs as irreversible. This prevents future conflicting
- transactions from replacing these jobs. The jobs can still be
- cancelled using the cancel command.
+ transactions from replacing these jobs (or even being enqueued
+ while the irreversible jobs are still pending). Irreversible
+ jobs can still be cancelled using the cancel
+ command.isolate is only valid for start
operations and causes all other units to be stopped when the
@@ -237,7 +252,7 @@ along with systemd; If not, see .
applications.ignore-requirements is similar to
- ignore-dependencies but only causes the
+ ignore-dependencies, but only causes the
requirement dependencies to be ignored, the ordering
dependencies will still be honoured.
@@ -256,7 +271,7 @@ along with systemd; If not, see .
sleep state. Any user may take these locks and privileged
users may override these locks. If any locks are taken,
shutdown and sleep state requests will normally fail
- (regardless if privileged or not) and a list of active locks
+ (regardless of whether privileged or not) and a list of active locks
is printed. However, if
is specified, the locks are ignored and not printed, and the
operation attempted anyway, possibly requiring additional
@@ -273,6 +288,8 @@ along with systemd; If not, see .
snapshot,
is-active,
is-failed,
+ is-enabled,
+ is-system-running,
enable and
disable.
@@ -299,30 +316,8 @@ along with systemd; If not, see .
-
-
-
-
- Do not pipe output into a pager.
-
-
-
-
-
-
-
- Talk to the systemd system manager. (Default)
-
-
-
-
-
-
-
- Talk to the systemd manager of the calling
- user.
-
-
+
+
@@ -380,11 +375,36 @@ along with systemd; If not, see .
When used with kill, choose which
- processes to kill. Must be one of ,
- or to select
- whether to kill only the main process of the unit, the
- control process or all processes of the unit. If omitted,
- defaults to .
+ processes to send a signal to. Must be one of
+ , or
+ to select whether to kill only the main
+ process, the control process or all processes of the
+ unit. The main process of the unit is the one that defines
+ the life-time of it. A control process of a unit is one that
+ is invoked by the manager to induce state changes of it. For
+ example, all processes started due to the
+ ExecStartPre=,
+ ExecStop= or
+ ExecReload= settings of service units are
+ control processes. Note that there is only one control
+ process per unit at a time, as only one state change is
+ executed at a time. For services of type
+ Type=forking, the initial process started
+ by the manager for ExecStart= is a
+ control process, while the process ultimately forked off by
+ that one is then considered the main process of the unit (if
+ it can be determined). This is different for service units
+ of other types, where the process forked off by the manager
+ for ExecStart= is always the main process
+ itself. A service unit consists of zero or one main process,
+ zero or one control process plus any number of additional
+ processes. Not all unit types manage processes of these
+ types however. For example, for mount units, control processes
+ are defined (which are the invocations of
+ /usr/bin/mount and
+ /usr/bin/umount), but no main process
+ is defined. If omitted, defaults to
+ .
@@ -419,7 +439,7 @@ along with systemd; If not, see .
safe option to request an immediate reboot. If
is specified twice for these
operations, they will be executed immediately without
- terminating any processes or umounting any file
+ terminating any processes or unmounting any file
systems. Warning: specifying twice
with any of these operations might result in data
loss.
@@ -451,7 +471,7 @@ along with systemd; If not, see .
with identical immediate effects, however, since the latter
is lost on reboot, the changes are lost too.
- Similar, when used with
+ Similarly, when used with
set-property, make changes only
temporarily, so that they are lost on the next
reboot.
@@ -459,26 +479,19 @@ along with systemd; If not, see .
-
-
+
- Execute the operation remotely. Specify a hostname, or
- username and hostname separated by @, to
- connect to. This will use SSH to talk to the remote systemd
- instance.
+ Takes one of full (the default),
+ enable-only,
+ disable-only. When used with the
+ preset or preset-all
+ commands, controls whether units shall be disabled and
+ enabled according to the preset rules, or only enabled, or
+ only disabled.
-
-
-
-
- Execute the operation on a local
- container. Specify a container name to connect
- to.
-
-
@@ -513,6 +526,12 @@ along with systemd; If not, see .
+
+
+
+
+
+
@@ -542,7 +561,7 @@ along with systemd; If not, see .
list-sockets PATTERN...
- List socket units ordered by the listening address.
+ List socket units ordered by listening address.
If one or more PATTERNs are
specified, only socket units matching one of them are
shown. Produces output similar to
@@ -553,8 +572,7 @@ LISTEN UNIT ACTIVATES
[::]:22 sshd.socket sshd.service
kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
-5 sockets listed.
-
+5 sockets listed.
Note: because the addresses might contains spaces, this output
is not suitable for programmatic consumption.
@@ -579,15 +597,24 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- start NAME...
+ start PATTERN...Start (activate) one or more units specified on the
command line.
+
+ Note that glob patterns operate on a list of currently
+ loaded units. Units which are not active and are not in a
+ failed state usually are not loaded, and would not be
+ matched by any pattern. In addition, in case of
+ instantiated units, systemd is often unaware of the
+ instance name until the instance has been started. Therefore,
+ using glob patterns with start
+ has limited usefulness.
- stop NAME...
+ stop PATTERN...Stop (deactivate) one or more units specified on the
@@ -595,7 +622,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- reload NAME...
+ reload PATTERN...Asks all units listed on the command line to reload
@@ -616,7 +643,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- restart NAME...
+ restart PATTERN...Restart one or more units specified on the command
@@ -625,7 +652,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- try-restart NAME...
+ try-restart PATTERN...Restart one or more units specified on the command
@@ -636,7 +663,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- reload-or-restart NAME...
+ reload-or-restart PATTERN...Reload one or more units if they support it. If not,
@@ -645,7 +672,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- reload-or-try-restart NAME...
+ reload-or-try-restart PATTERN...Reload one or more units if they support it. If not,
@@ -675,48 +702,50 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- kill NAME...
+ kill PATTERN...Send a signal to one or more processes of the
unit. Use to select which
- process to kill. Use to select
- the kill mode and to select the
- signal to send.
+ process to kill. Use to select
+ the signal to send.
- is-active NAME...
+ is-active PATTERN...Check whether any of the specified units are active
- (i.e. running). Returns an exit code 0 if at least one is
- active, non-zero otherwise. Unless
- is specified, this will also print the current unit state to
- STDOUT.
+ (i.e. running). Returns an exit code
+ 0 if at least one is active, or
+ non-zero otherwise. Unless is
+ specified, this will also print the current unit state to
+ standard output.
- is-failed NAME...
+ is-failed PATTERN...
- Check whether any of the specified units are in a "failed" state.
- Returns an exit code 0 if at least one has failed, non-zero
- otherwise. Unless is specified, this
- will also print the current unit state to
- STDOUT.
+ Check whether any of the specified units are in a
+ "failed" state. Returns an exit code
+ 0 if at least one has failed,
+ non-zero otherwise. Unless is
+ specified, this will also print the current unit state to
+ standard output.
- statusNAME...|PID...]
+ statusPATTERN...|PID...]Show terse runtime status information about one or
more units, followed by most recent log data from the
- journal. If no units are specified, show all units (subject
- to limitations specified with ). If a PID
- is passed, show information about the unit the process
- belongs to.
+ journal. If no units are specified, show system status. If
+ combined with , also show the status of
+ all units (subject to limitations specified with
+ ). If a PID is passed, show information
+ about the unit the process belongs to.
This function is intended to generate human-readable
output. If you are looking for computer-parsable output,
@@ -734,7 +763,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- showNAME...|JOB...
+ showPATTERN...|JOB...Show properties of one or more units, jobs, or the
@@ -751,7 +780,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- cat NAME...
+ cat PATTERN...Show backing files of one or more units. Prints the
@@ -787,7 +816,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- help NAME...|PID...
+ help PATTERN...|PID...Show manual pages for one or more units, if
@@ -797,7 +826,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- reset-failed [NAME...]
+ reset-failed [PATTERN...]Reset the failed state of the
@@ -977,7 +1006,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
staticUnit is not enabled, but has no provisions for enabling in [Install] section
- 1
+ 0disabled
@@ -1012,16 +1041,35 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
command line, to the defaults configured in the preset
policy files. This has the same effect as
disable or enable,
- depending how the unit is listed in the preset files. For
- more information on the preset policy format, see
+ depending how the unit is listed in the preset files.
+
+ Use to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.
+
+ For more information on the preset policy format,
+ see
systemd.preset5.
For more information on the concept of presets, please
- consult the
- Preset
+ consult the Preset
document.
+
+ preset-all
+
+
+ Resets all installed unit files to the defaults
+ configured in the preset policy file (see above).
+
+ Use to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.
+
+
+
mask NAME...
@@ -1034,7 +1082,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
activation of the unit, including manual activation. Use
this option with care. This honors the
option to only mask temporarily
- until the next reoobt of the system.
+ until the next reboot of the system.
@@ -1082,6 +1130,24 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
+
+ Machine Commands
+
+
+
+ list-machines PATTERN...
+
+
+ List the host and all running local containers with
+ their state. If one or more
+ PATTERNs are specified, only
+ containers matching one of them are shown.
+
+
+
+
+
+
Job Commands
@@ -1117,9 +1183,10 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Create a snapshot. If a snapshot name is specified,
the new snapshot will be named after it. If none is
- specified, an automatic snapshot name is generated. In either
- case, the snapshot name used is printed to STDOUT, unless
- is specified.
+ specified, an automatic snapshot name is generated. In
+ either case, the snapshot name used is printed to standard
+ output, unless is specified.
+
A snapshot refers to a saved state of the systemd
manager. It is implemented itself as a unit that is
@@ -1136,7 +1203,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
- delete NAME...
+ delete PATTERN...Remove a snapshot previously created with
@@ -1180,6 +1247,19 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
specified value.
+
+ import-environment VARIABLE...
+
+
+ Import all, one or more environment variables set on
+ the client into the systemd manager environment block. If
+ no arguments are passed, the entire environment block is
+ imported. Otherwise, a list of one or more environment
+ variable names should be passed, whose client-side values
+ are then imported into the manager's environment
+ block.
+
+
@@ -1194,7 +1274,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Reload systemd manager configuration. This will reload
all unit files and recreate the entire dependency
tree. While the daemon is being reloaded, all sockets systemd
- listens on on behalf of user configuration will stay
+ listens on behalf of user configuration will stay
accessible.This command should not be confused
with the load or
reload commands.
@@ -1221,6 +1301,20 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
System Commands
+
+ is-system-running
+
+
+ Checks whether the system is running. This returns
+ success when the system is fully up and running, meaning
+ not in startup, shutdown or maintainance mode. Failure is
+ returned otherwise. In addition, the current state is
+ printed in a short string to standard output. Use
+ to suppress output of this state
+ string.
+
+
+
default
@@ -1229,6 +1323,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
isolate default.target.
+
rescue
@@ -1382,23 +1477,55 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Parameter Syntax
- For unit commands the specified
- NAME should be the full name of the
- unit, or an abbreviated name which is automatically extended with
- the .service suffix.
- # systemctl start foo.service is equivalent to:
- # systemctl start foo
- Note that (absolute) paths to device nodes are automatically converted to device unit names, and other (absolute) paths to mount unit names.
- # systemctl status /dev/sda
-# systemctl status /home is equivalent to:
- # systemctl status dev-sda.device
-# systemctl status home.mount
-
- For unit file commands the
- specified NAME should be the full name
- of the unit file, or the absolute path to the unit file.
- # systemctl link /path/to/foo.service
-
+ Unit commands listed above take either a single unit name
+ (designated as NAME), or multiple
+ unit specifications (designated as
+ PATTERN...). In the first case, the
+ unit name with or without a suffix must be given. If the suffix
+ is not specified, systemctl will append a suitable suffix,
+ .service by default, and a type-specific
+ suffix in case of commands which operate only on specific unit
+ types. For example,
+ # systemctl start sshd and
+ # systemctl start sshd.service
+ are equivalent, as are
+ # systemctl isolate snapshot-11
+ and
+ # systemctl isolate snapshot-11.snapshot
+ Note that (absolute) paths to device nodes are automatically
+ converted to device unit names, and other (absolute) paths to
+ mount unit names.
+ # systemctl status /dev/sda
+# systemctl status /home
+ are equivalent to:
+ # systemctl status dev-sda.device
+# systemctl status home.mount
+ In the second case, shell-style globs will be matched against
+ currently loaded units; literal unit names, with or without
+ a suffix, will be treated as in the first case. This means that
+ literal unit names always refer to exactly one unit, but globs
+ may match zero units and this is not considered an error.
+
+ Glob patterns use
+ fnmatch3,
+ so normal shell-style globbing rules are used, and
+ *, ?,
+ [] may be used. See
+ glob7
+ for more details. The patterns are matched against the names of
+ currently loaded units, and patterns which do not match anything
+ are silently skipped. For example:
+ # systemctl stop sshd@*.service
+ will stop all sshd@.service instances.
+
+
+ For unit file commands, the specified
+ NAME should be the full name of the
+ unit file, or the absolute path to the unit file:
+ # systemctl enable foo.service
+ or
+ # systemctl link /path/to/foo.service
+
@@ -1410,23 +1537,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
code otherwise.
-
- Environment
-
-
-
- $SYSTEMD_PAGER
-
-
- Pager to use when is not
- given; overrides $PAGER. Setting this to
- an empty string or the value cat is
- equivalent to passing
- .
-
-
-
-
+ See Also
@@ -1438,8 +1549,9 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
systemd.unit5,
systemd.resource-management5,
systemd.special7,
- wall1,
+ wall1,
systemd.preset5
+ glob7