X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fsystemctl.xml;h=598d31323f5f46f4c88ca72c2f7ad83049334706;hb=260ad50f5b4a9795032e3119c64f838a2d03370d;hp=174988c55b2137ccb709996dd03bab31fbd6db36;hpb=0d292f5e7597a729365644edfbcdf2e5fac8beb4;p=elogind.git
diff --git a/man/systemctl.xml b/man/systemctl.xml
index 174988c55..598d31323 100644
--- a/man/systemctl.xml
+++ b/man/systemctl.xml
@@ -131,6 +131,18 @@ along with systemd; If not, see .
+
+
+
+
+
+ When listing units, also show units of local
+ containers. Units of local containers will be prefixed with
+ the container name, separated by a single colon character
+ (:).
+
+
+
@@ -145,12 +157,27 @@ along with systemd; If not, see .
+
+
+ With list-dependencies, show the
+ units that are ordered before the specified unit. In other
+ words, list the units that are in the After=
+ directive of the specified unit, have the specified unit in
+ their Before= directive, or are otherwise
+ implicit dependencies of the specified unit.
+
+
+
+
- Show after (before) which units the specified unit is started
- with list-dependencies.
-
+ With list-dependencies, show the
+ units that are ordered after the specified unit. In other
+ words, list the units that are in the Before=
+ directive of the specified unit, have the specified unit in
+ their After= directive, or otherwise depend
+ on the specified unit.
@@ -203,8 +230,10 @@ along with systemd; If not, see .
If replace-irreversibly is specified,
operate like replace, but also mark the new
jobs as irreversible. This prevents future conflicting
- transactions from replacing these jobs. The jobs can still be
- cancelled using the cancel command.
+ transactions from replacing these jobs (or even being enqueued
+ while the irreversible jobs are still pending). Irreversible
+ jobs can still be cancelled using the cancel
+ command.
isolate is only valid for start
operations and causes all other units to be stopped when the
@@ -259,6 +288,8 @@ along with systemd; If not, see .
snapshot,
is-active,
is-failed,
+ is-enabled,
+ is-system-running,
enable and
disable.
@@ -344,11 +375,36 @@ along with systemd; If not, see .
When used with kill, choose which
- processes to kill. Must be one of ,
- or to select
- whether to kill only the main process of the unit, the
- control process or all processes of the unit. If omitted,
- defaults to .
+ processes to send a signal to. Must be one of
+ , or
+ to select whether to kill only the main
+ process, the control process or all processes of the
+ unit. The main process of the unit is the one that defines
+ the life-time of it. A control process of a unit is one that
+ is invoked by the manager to induce state changes of it. For
+ example, all processes started due to the
+ ExecStartPre=,
+ ExecStop= or
+ ExecReload= settings of service units are
+ control processes. Note that there is only one control
+ process per unit at a time, as only one state change is
+ executed at a time. For services of type
+ Type=forking, the initial process started
+ by the manager for ExecStart= is a
+ control process, while the process ultimately forked off by
+ that one is then considered the main process of the unit (if
+ it can be determined). This is different for service units
+ of other types, where the process forked off by the manager
+ for ExecStart= is always the main process
+ itself. A service unit consists of zero or one main process,
+ zero or one control process plus any number of additional
+ processes. Not all unit types manage processes of these
+ types however. For example, for mount units, control processes
+ are defined (which are the invocations of
+ /usr/bin/mount and
+ /usr/bin/umount), but no main process
+ is defined. If omitted, defaults to
+ .
@@ -383,7 +439,7 @@ along with systemd; If not, see .
safe option to request an immediate reboot. If
is specified twice for these
operations, they will be executed immediately without
- terminating any processes or umounting any file
+ terminating any processes or unmounting any file
systems. Warning: specifying twice
with any of these operations might result in data
loss.
@@ -422,6 +478,20 @@ along with systemd; If not, see .
+
+
+
+
+ Takes one of full (the default),
+ enable-only,
+ disable-only. When use with the
+ preset or preset-all
+ commands controls whether units shall be disabled and
+ enabled according to the preset rules, or only enabled, or
+ only disabled.
+
+
+
@@ -637,9 +707,8 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Send a signal to one or more processes of the
unit. Use to select which
- process to kill. Use to select
- the kill mode and to select the
- signal to send.
+ process to kill. Use to select
+ the signal to send.
@@ -672,10 +741,11 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Show terse runtime status information about one or
more units, followed by most recent log data from the
- journal. If no units are specified, show all units (subject
- to limitations specified with ). If a PID
- is passed, show information about the unit the process
- belongs to.
+ journal. If no units are specified, show system status. If
+ combined with , also show the status of
+ all units (subject to limitations specified with
+ ). If a PID is passed, show information
+ about the unit the process belongs to.
This function is intended to generate human-readable
output. If you are looking for computer-parsable output,
@@ -971,16 +1041,35 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
command line, to the defaults configured in the preset
policy files. This has the same effect as
disable or enable,
- depending how the unit is listed in the preset files. For
- more information on the preset policy format, see
+ depending how the unit is listed in the preset files.
+
+ Use to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.
+
+ For more information on the preset policy format,
+ see
systemd.preset5.
For more information on the concept of presets, please
- consult the
- Preset
+ consult the Preset
document.
+
+ preset-all
+
+
+ Resets all installed unit files to the defaults
+ configured in the preset policy file (see above).
+
+ Use to control
+ whether units shall be enabled and disabled, or only
+ enabled, or only disabled.
+
+
+
mask NAME...
@@ -993,7 +1082,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
activation of the unit, including manual activation. Use
this option with care. This honors the
option to only mask temporarily
- until the next reoobt of the system.
+ until the next reboot of the system.
@@ -1212,6 +1301,20 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
System Commands
+
+ is-system-running
+
+
+ Checks whether the system is running. This returns
+ success when the system is fully up and running, meaning
+ not in startup, shutdown or maintainance mode. Failure is
+ returned otherwise. In addition, the current state is
+ printed in a short string to standard output. Use
+ to suppress output of this state
+ string.
+
+
+
default
@@ -1220,6 +1323,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
isolate default.target.
+
rescue
@@ -1373,7 +1477,7 @@ kobject-uevent 1 systemd-udevd-kernel.socket systemd-udevd.service
Parameter Syntax
- Unit ommands listed above take either a single unit name
+ Unit commands listed above take either a single unit name
(designated as NAME), or multiple
unit specifications (designated as
PATTERN...). In the first case, the