X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=man%2Fjournald.conf.xml;h=7aa2e78ed34bf0177674acfebcf1981b49691057;hb=693093c6db9d8510729b7566e74182b4ff50e31c;hp=deb2344fc0e18a743908525e7ea15b6110a895e7;hpb=c66e7bc7a19c068ca1c414f2f8bd5dc13c20907f;p=elogind.git
diff --git a/man/journald.conf.xml b/man/journald.conf.xml
index deb2344fc..7aa2e78ed 100644
--- a/man/journald.conf.xml
+++ b/man/journald.conf.xml
@@ -54,8 +54,8 @@
Description
- This files configures various parameters of the
- systemd journal service
+ This file configures various parameters of the
+ systemd journal service,
systemd-journald.service8.
@@ -68,11 +68,51 @@
+
+ Storage=
+
+ Controls where to
+ store journal data. One of
+ volatile,
+ persistent,
+ auto and
+ none. If
+ volatile, journal
+ log data will be stored only in
+ memory, i.e. below the
+ /run/log/journal
+ hierarchy (which is created if
+ needed). If
+ persistent, data will
+ be stored preferably on disk,
+ i.e. below the
+ /var/log/journal
+ hierarchy (which is created if
+ needed), with a fallback to
+ /run/log/journal
+ (which is created if needed), during
+ early boot and if the disk is not
+ writable. auto is
+ similar to
+ persistent but the
+ directory
+ /var/log/journal
+ is not created if needed, so that its
+ existence controls where log data
+ goes. none turns
+ off all storage, all log data received
+ will be dropped. Forwarding to other
+ targets, such as the console, the
+ kernel log buffer or a syslog daemon
+ will still work however. Defaults to
+ auto.
+
+
Compress=Takes a boolean
- value. If enabled (the default) data
+ value. If enabled (the default), data
objects that shall be stored in the
journal and are larger than a certain
threshold are compressed with the XZ
@@ -81,26 +121,76 @@
system.
+
+ Seal=
+
+ Takes a boolean
+ value. If enabled (the default), and a
+ sealing key is available (as created
+ by
+ journalctl1's
+
+ command), forward secure sealing (FSS)
+ for all persistent journal files is
+ enabled. FSS is based on Seekable
+ Sequential Key Generators by
+ G. A. Marson and B. Poettering and
+ may be used to protect journal files
+ from unnoticed
+ alteration.
+
+
+
+ SplitMode=
+
+ Controls whether to
+ split up journal files per user. One
+ of login,
+ uid and
+ none. If
+ login, each logged-in
+ user will get his own journal
+ files, but systemd user IDs will log
+ into the system journal. If
+ uid, any user ID
+ will get his own journal files
+ regardless whether it belongs to a
+ system service or refers to a real
+ logged in user. If
+ none, journal files
+ are not split up by user and all
+ messages are instead stored in the single
+ system journal. Note that splitting
+ up journal files by user is only
+ available for journals stored
+ persistently. If journals are stored
+ on volatile storage (see above), only a
+ single journal file for all user IDs
+ is kept. Defaults to
+ login.
+
+
RateLimitInterval=RateLimitBurst=Configures the rate
limiting that is applied to all
- messages generated on the system. If
+ messages generated on the system. If,
in the time interval defined by
- RateLimitInterval=
+ RateLimitInterval=,
more messages than specified in
RateLimitBurst= are
- logged by a service all further
+ logged by a service, all further
messages within the interval are
- dropped, until the interval is over. A
+ dropped until the interval is over. A
message about the number of dropped
messages is generated. This rate
limiting is applied per-service, so
that two services which log do not
interfere with each other's
- limit. Defaults to 100 messages in
+ limits. Defaults to 200 messages in
10s. The time specification for
RateLimitInterval=
may be specified in the following
@@ -117,11 +207,9 @@
SystemMaxUse=SystemKeepFree=SystemMaxFileSize=
- SystemMinFileSize=RuntimeMaxUse=RuntimeKeepFree=RuntimeMaxFileSize=
- RuntimeMinFileSize=Enforce size limits on
the journal files stored. The options
@@ -139,17 +227,27 @@
/run/log/journal. The
former is used only when
/var is mounted,
- writable and the directory
+ writable, and the directory
/var/log/journal
- exists. Otherwise only the latter
+ exists. Otherwise, only the latter
applies. Note that this means that
during early boot and if the
administrator disabled persistent
- logging only the latter options apply,
+ logging, only the latter options apply,
while the former apply if persistent
logging is enabled and the system is
fully booted
- up. SystemMaxUse=
+ up. journalctl and
+ systemd-journald
+ ignore all files with names not ending
+ with .journal or
+ .journal~, so only
+ such files, located in the appropriate
+ directories, are taken into account
+ when calculating current disk usage.
+
+
+ SystemMaxUse=
and RuntimeMaxUse=
control how much disk space the
journal may use up at
@@ -158,15 +256,14 @@
system. SystemKeepFree=
and
RuntimeKeepFree=
- control how much disk space the
- journal shall always leave free for
- other uses if less than the disk space
- configured in
- SystemMaxUse= and
- RuntimeMaxUse= is
- available. Defaults to 5% of the size
- of the respective file
- system. SystemMaxFileSize=
+ control how much disk space
+ systemd-journald shall always leave
+ free for other uses. Defaults to 15%
+ of the size of the respective file
+ system. systemd-journald will respect
+ both limits, i.e. use the smaller of
+ the two values.
+ SystemMaxFileSize=
and
RuntimeMaxFileSize=
control how large individual journal
@@ -174,24 +271,95 @@
influences the granularity in which
disk space is made available through
rotation, i.e. deletion of historic
- data. Defaults to one eigth of the
+ data. Defaults to one eighth of the
values configured with
SystemMaxUse= and
RuntimeMaxUse=, so
that usually seven rotated journal
- files are kept as
- history. SystemMinFileSize=
- and
- RuntimeMinFileSize=
- control how large individual journal
- files grow at minimum. Defaults to
- 64K. Specify values in bytes or use
- K, M, G, T, P, E as units for the
- specified sizes. Note that size limits
- are enforced synchronously to journal
- files as they are extended, and need
- no explicit rotation step triggered by
- time.
+ files are kept as history. Specify
+ values in bytes or use K, M, G, T, P,
+ E as units for the specified sizes
+ (equal to 1024, 1024²,... bytes).
+ Note that size limits are enforced
+ synchronously when journal files are
+ extended, and no explicit rotation
+ step triggered by time is
+ needed.
+
+
+
+ MaxFileSec=
+
+ The maximum time to
+ store entries in a single journal
+ file before rotating to the next
+ one. Normally, time-based rotation
+ should not be required as size-based
+ rotation with options such as
+ SystemMaxFileSize=
+ should be sufficient to ensure that
+ journal files do not grow without
+ bounds. However, to ensure that not
+ too much data is lost at once when old
+ journal files are deleted, it might
+ make sense to change this value from
+ the default of one month. Set to 0 to
+ turn off this feature. This setting
+ takes time values which may be
+ suffixed with the units
+ year,
+ month,
+ week, day,
+ h or m
+ to override the default time unit of
+ seconds.
+
+
+
+ MaxRetentionSec=
+
+ The maximum time to
+ store journal entries. This
+ controls whether journal files
+ containing entries older then the
+ specified time span are
+ deleted. Normally, time-based deletion
+ of old journal files should not be
+ required as size-based deletion with
+ options such as
+ SystemMaxUse=
+ should be sufficient to ensure that
+ journal files do not grow without
+ bounds. However, to enforce data
+ retention policies, it might make sense
+ to change this value from the
+ default of 0 (which turns off this
+ feature). This setting also takes
+ time values which may be suffixed with
+ the units year,
+ month,
+ week, day,
+ h or m
+ to override the default time unit of
+ seconds.
+
+
+
+
+ SyncIntervalSec=
+
+ The timeout before
+ synchronizing journal files to
+ disk. After syncing, journal files are
+ placed in the OFFLINE state. Note that
+ syncing is unconditionally done
+ immediately after a log message of
+ priority CRIT, ALERT or EMERG has been
+ logged. This setting hence applies
+ only to messages of the levels ERR,
+ WARNING, NOTICE, INFO, DEBUG. The
+ default timeout is 5 minutes.
+
@@ -207,20 +375,15 @@
system console. These options take
boolean arguments. If forwarding to
syslog is enabled but no syslog daemon
- is running the respective option has
- no effect. By default only forwarding
+ is running, the respective option has
+ no effect. By default, only forwarding
to syslog is enabled. These settings
- may be overridden at boot time with the
- kernel command line options
+ may be overridden at boot time with
+ the kernel command line options
systemd.journald.forward_to_syslog=,
systemd.journald.forward_to_kmsg=
and
- systemd.journald.forward_to_console=. If
- forwarding to the kernel log buffer and
- ImportKernel= is
- enabled at the same time care is taken
- to avoid logging loops. It is safe to
- use these options in combination.
+ systemd.journald.forward_to_console=.
@@ -270,22 +433,6 @@
/dev/console.
-
- ImportKernel=
-
- Controls whether
- kernel log messages shall be stored in
- the journal. Takes a boolean argument
- and defaults to enabled. Note that
- currently only one userspace service
- can read kernel messages at a time,
- which means that kernel log message
- reading might get corrupted if it
- is enabled in more than one service,
- for example in both the journal and a
- traditional syslog service.
-
-
@@ -297,7 +444,7 @@
systemd-journald.service8,
journalctl1,
systemd.journal-fields7,
- systemd.conf5
+ systemd-system.conf5