X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=filamentspool.scad;h=869ca3330872212a4eb2fd80d6b29862c4b6a18b;hb=6cb2f566b91a45169f936b18523ca3198d2ff8b1;hp=15a58282a434a3e80afb9bf7a35fea5e7041e2fe;hpb=30f9e456cd96bd643270e26c54cebef9364130c0;p=reprap-play.git

diff --git a/filamentspool.scad b/filamentspool.scad
index 15a5828..869ca33 100644
--- a/filamentspool.scad
+++ b/filamentspool.scad
@@ -22,16 +22,22 @@ axletowerfudgebend = 0;
 axleaxlefudgebend = 3;
 axlepadlen = 1.0;
 
-prongthick=selsz(5,7);
-prongwidth=selsz(5,7);
+armend_length = 120;
+
+prongthick=selsz(5,5);
+prongwidth=selsz(5,5);
+prongribwidth=3;
+prongribheight=selsz(0,4);
 ratchetstep=15;
 ratchettooth=3;
 ratchettoothheight=5;
 ratchettoothsmoothr=1;
 ratchettoothslope=0.75;
 overlap=0.5;
-cupwidth=selsz(40,60);
-cupheight=selsz(55,75);
+cupwidth=selsz(40,50);
+cupheight=selsz(55,50);
+
+cupstrong_dx=selsz(0,-10);
 
 propxshift = 0;
 
@@ -79,14 +85,17 @@ frictionwasherextrapush = 1.0;
 
 ratchetpawl=ratchetstep-ratchettooth-bigslop*2;
 
-nondove_armbase = 100;
-nondove_armhole_x = 60;
+nondove_armhole_x = 32;
 nondove_armhole_hole = 4;
 nondove_armhole_support = 7;
 nondove_armhole_wall = 4;
 nondove_armhole_slop = 0.5;
 nondove_armhole_slop_x = 0.5;
 
+nondove_armbase = nondove_armhole_x + nondove_armhole_hole/2 +
+  nondove_armhole_support;
+echo(nondove_armbase);
+
 include <doveclip.scad>
 include <cliphook.scad>
 include <filamentteeth.scad>
@@ -98,7 +107,7 @@ totalwidth = armendwallthick*2 + channelwidth;
 totalheight = channeldepth + armendbasethick;
 stalkwidth = prongwidth + prongstalkxwidth;
 
-module ArmEnd(length=120){ ////toplevel
+module ArmEnd(length=armend_length){ ////toplevel
   if (usedove()) {
     translate([ratchettoothsmoothr, channelwidth/2, -armendbasethick]) {
       rotate([0,0,-90])
@@ -161,7 +170,7 @@ module FilamentCupHandle(){
 
 module FilamentCupCup(){
   for (my=[0,1]) mirror([0,my,0]) {
-    translate([0,cupwidth/2,0])
+    translate([0, cupwidth/2, 0])
       cube([cupheight + prongwidth, prongwidth, prongthick]);
   }
 }
@@ -177,6 +186,26 @@ module FilamentCup() { ////toplevel
     FilamentCupCup();
   cube([prongwidth, baselen+1, prongthick]);
 
+  translate([cupstrong_dx, prongwidth, 0]) {
+    cube([prongwidth, baselen-prongwidth, prongthick]);
+    for (y = [0, .33, .67, 1])
+      translate([0, (baselen - prongwidth) * y, 0])
+	cube([-cupstrong_dx + 1, prongwidth, prongthick]);
+  }
+  if (cupstrong_dx != 0) {
+    rotate([0,0,45])
+      translate([-prongwidth*.55, -prongwidth*2.1, 0])
+      cube([prongwidth*(2.65), prongwidth*4.2, prongthick]);
+  }
+
+  translate([0, -0.2, 0])
+    cube([prongribwidth, baselen, prongthick + prongribheight]);
+
+  if (prongribheight > 0) {
+    translate([-prongwidth, baselen, 0])
+      cube([cupheight/2, prongwidth + prongribheight, prongribwidth]);
+  }
+
   midrad = cupwidth/2 + prongwidth/2;
 
   propshift = stalklength - overclipdepth - prongthick + propxshift;
@@ -190,12 +219,12 @@ module FilamentCup() { ////toplevel
 	  prongthick]);
   }
   for (y = [overclipcupgap, overclipcupgap+overclipcupnextgap]) {
-    translate([0, y, 0])
+    translate([cupstrong_dx, y + prongwidth, 0])
       rotate([0,0, 102 + fdia])
       FilamentTeeth(fdia=fdia, h=teethh);
   }
   for (x = [-0.3, -1.3]) {
-    translate([cupheight + overclipcupnextgap*x, baselen + prongthick, 0])
+    translate([cupheight + overclipcupnextgap*x, baselen + prongwidth, 0])
       rotate([0,0, 12 + fdia])
       FilamentTeeth(fdia=fdia, h=teethh);
   }      
@@ -419,10 +448,10 @@ module FilamentCupPair(){ ////toplevel
 }
 
 //ArmEnd();
-//FilamentCup();
+FilamentCup();
 //FilamentCupPair();
 //CupSecuringClip();
-Hub();
+//Hub();
 //ArmExtender();
 //Axle();
 //AxleWasher();