X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=fairphone-case.scad;h=deb40ba01a1036cc2a0c879f7311e665e0427335;hb=2770e3844f3885e574bd4bc029d6b15efef060a9;hp=c22f1bcc27e9b42ebe9d0b70ac94a25dacdeadfa;hpb=aa025aa7d75f68f7b8fb05a5f90aafae61336017;p=reprap-play.git

diff --git a/fairphone-case.scad b/fairphone-case.scad
index c22f1bc..deb40ba 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -25,6 +25,7 @@ initial_layer_width = 0.125; // ^ needed for mode 3 only
 multicolour_gap = 0.15; // each side
 
 phone_cnr_rad = 6.0;
+phone_rim_depth = 0.80; // includes allowance for a screen protector
 
 button_cutout_depth = 9;
 
@@ -39,7 +40,7 @@ camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
 jack_pos = [ 13.83, 8.485 ];
 jack_dia = 10.64 + .5; // some jack I had lying around
 
-led_pos = [ 12.50, 8.00 ];
+led_pos = [ 10.86, 8.58 ];
 led_aperture = 5;
 led_window_ledge = 0.75; // each side
 
@@ -196,7 +197,19 @@ kppa = [ kppb[0], kppf[1] ];
 lpp10 = [ epp5[0] + lid_gap_x, kppc[1] + lid_gap_z ];
 lpp11 = [ lpp10[0],            epp5[1] + lid_gap_z ];
 
-lp_r12 = case_th_lid - (lpp11[1] - lpp10[1]);
+lpp14 = lpp10 + [1,0] * keeper_inner_width;
+// exact x posn not very important; must extend past end of keeper
+
+lpp15 = [ lpp14[0],
+	  epp0[1] - phone_rim_depth + 1/2.5 * case_th_lid ];
+// ^ beam theory says to maximise force before contact,
+//   the gap below the `beam' (the lid) must be 1/3
+//   the thickness (ie the lid thickness) if the beam
+//   is solid, or 1/2 if it has a top and bottom only.
+//   ours is mostly solid.
+
+lp_r12 = max(case_th_lid - (lpp11[1] - lpp15[1]),
+	     case_th_lip);
 
 lpp12 = [ epp4[0] + lp_r12,    lpp11[1] ];
 lpp13 = [ lpp12[0],            lpp12[1] + lp_r12 ];
@@ -377,7 +390,9 @@ module LidEdgeProfile(){
 	    lpp12,
 	    lpp13,
 	    lpp13 + [10, 0],
-	    lpp10 + [10, 0]
+	    lpp15 + [10, 0],
+	    lpp15,
+	    lpp14,
 	    ]);
   intersection(){
     circleat(lpp12, r=lp_r12);
@@ -1144,6 +1159,8 @@ module TestSelectFrame(){
 
 module TestSelectLidFrame(){
   TestSelectFrame();
+  translate([led_pos[0], -led_pos[1], -50])
+    cylinder(r= nla_r2+2, h=100);
 }
 
 module TestFrameCase(){ ////toplevel