X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=fairphone-case.scad;h=761c2509fe55920eec9dd6b8b41560b5135c3834;hb=1da57d56e67f897e7b4ac43afbd3db6f0a23d145;hp=77d81ae9715b0a1125600b8381e47d09d729d62c;hpb=44a6d3148f45cc3a597478a375ff94b4596b583f;p=reprap-play.git

diff --git a/fairphone-case.scad b/fairphone-case.scad
index 77d81ae..761c250 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -2,7 +2,7 @@
 
 phone = [ 145.0, 75.0 ];
 
-bumper = [ 0.750, 0.875 ];
+bumper = [ 0.250, 0.250 ];
 // ^ One side.  Overall size is increased by twice this.
 // If no bumpers, is the gap around the phone.
 
@@ -15,8 +15,8 @@ phone_total_thick = 12.0;
 phone_backside_slope_inner = 1.5; // larger means shallower
 phone_backside_slope_outer = 1.0; // larger means shallower
 
-camera_pos_tl = [  6.250, 12.125 ]; // measured from tl corner
-camera_pos_br = [ 22.10,  36.975 ]; // tl/br as seen from back
+camera_pos_tl = [  6.450, 12.750 ]; // measured from tl corner
+camera_pos_br = [ 22.300, 37.600 ]; // tl/br as seen from back
 
 case_th_bottom = 2.5;
 case_th_lid = 2.5;
@@ -48,7 +48,7 @@ lid_lip = 1.75;
 $fa = 5;
 $fs = 0.1;
 
-button_l_fudge = 4.5;
+button_l_fudge = 4.4;
 
 strut_min_at_end = 1.5;
 
@@ -265,7 +265,7 @@ module SideButton(y,l){
 }
 
 module Buttons(){
-  CaseBase_rhsflip([1]) SideButton(20.6, 8.8) children(); // power
+  CaseBase_rhsflip([1]) SideButton(19.650, 8.9) children(); // power
 }
 
 module Struts(x_start, z_min, th){