X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=fairphone-case.scad;h=368b4659c81aa18c2fb5ebfcdf0127850950671b;hb=8c61ec189bf63c468b0fffb65d4b63b0fbba2bf2;hp=bc617c963ec314d7df5a181bb53325b811ffbb8a;hpb=fd7f3984ec0f42f5e71177a2a1367c2785aa19f2;p=reprap-play.git

diff --git a/fairphone-case.scad b/fairphone-case.scad
index bc617c9..368b465 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -56,6 +56,8 @@ keeper_gap_z_bot = 0.75;
 keeper_gap_x     = 0.25;
 keeper_gap_x_holes = 0.75;
 
+keeper_side = 1; // 0 = lhs; 1 = rhs
+
 case_lip = 1.25;
 
 lid_gap_x = 0.25;
@@ -561,7 +563,7 @@ module Case(){ ////toplevel
       CaseBase();
 
       // ledge (fixed keeper)
-      intersection(){
+      Flip_rhs(1-keeper_side) intersection(){
 	rotate([90, 0, 0])
 	  linear_extrude(height = phone_height + phone_cnr_rad * 2)
 	  KeeperProfile(1);
@@ -579,7 +581,7 @@ module Case(){ ////toplevel
     }
 
     // slot for keeper
-    Flip_rhs(1)
+    Flip_rhs(keeper_side)
       translate([0, -phone_cnr_rad, 0])
       rotate([90, 0, 0])
       linear_extrude(height = phone_height + phone_cnr_rad * 2)
@@ -605,7 +607,7 @@ module Case(){ ////toplevel
 	    if ($button_leg_only)
 	      rotate([-90,90,0])
 		translate([phone_width/2, -400, kppe[1]])
-		mirror([$rhsflip,0,0]) cube([400, 800, 50]);
+		mirror([1-abs($rhsflip - keeper_side),0,0]) cube([400, 800, 50]);
 	  }
 	  translate([0,0, -bppR[0]])
 	    linear_extrude(height= 20)
@@ -827,11 +829,6 @@ module TestFrameLidPrint(){ ////toplevel
   }
 }
 
-module Keeper(){ ////toplevel
-  Flip_rhs()
-    OneKeeper();
-}
-
 module ButtonPlanForDemo(z, deep, cut){
   translate([0,0,z])
     ButtonPlan(8, deep, cut);