X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=fairphone-case.scad;h=301243875ce7fffa05f14a487e5f3bb0e7eebf44;hb=882fb1c50e3368d8526c46b5e67fca7ff95a2682;hp=aeac8ce51aa0c49f50450f90f48302ca13618ec5;hpb=0f9b843c251c4fbc80cc601650efdb298132e5e2;p=reprap-play.git

diff --git a/fairphone-case.scad b/fairphone-case.scad
index aeac8ce..3012438 100644
--- a/fairphone-case.scad
+++ b/fairphone-case.scad
@@ -2,7 +2,9 @@
 
 phone = [ 145.0, 75.0 ];
 
-bumpers = [ 1.5, 1.75 ]; // both sides together
+bumpers = [ 1.5, 1.75 ];
+// ^ both sides together.
+// If no bumpers, is the gap around the phone.
 
 phone_cnr_rad = 6.0;
 
@@ -13,8 +15,8 @@ phone_total_thick = 12.0;
 phone_backside_slope_inner = 1.5; // larger means shallower
 phone_backside_slope_outer = 1.0; // larger means shallower
 
-camera_pos_tl = [  7.0, 13.0 ]; // measured from tl corner
-camera_pos_br = [ 22.85,37.85]; // tl/br as seen from back
+camera_pos_tl = [  5.5,  11.25 ]; // measured from tl corner
+camera_pos_br = [ 21.35, 36.10 ]; // tl/br as seen from back
 
 case_th_bottom = 2.5;
 case_th_lid = 2.5;
@@ -325,6 +327,7 @@ module Case(){ ////toplevel
       mirror([0, 0, 1])
       linear_extrude(height = 20)
       mirror([0, 1, 0])
+      translate(bumpers)
       rectfromto(camera_pos_tl, camera_pos_br);
 
     // struts (invisible, because they're buried in the case)
@@ -399,7 +402,7 @@ module TestSelectCamera(){
     linear_extrude(height = 50)
     mirror([0, 1, 0])
     rectfromto([-20, -20],
-	       camera_pos_br + [ 5, 5 ]);
+	       camera_pos_br + bumpers + [ 5, 5 ]);
 }
 
 module TestCamera(){ ////toplevel