X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=fairphone-battery-case.scad;h=1d703596282b71dd9f74163993ab27aaba739c22;hb=2132efba59634024b51ec9c19eb40a490081cfc9;hp=06880da05137e9b1797eb85b83ab61b888504dbe;hpb=9e6563261adfc5a1281a26dc5ed4f42c100e2d90;p=reprap-play.git

diff --git a/fairphone-battery-case.scad b/fairphone-battery-case.scad
index 06880da..1d70359 100644
--- a/fairphone-battery-case.scad
+++ b/fairphone-battery-case.scad
@@ -1,18 +1,31 @@
 // -*- C -*-
 
-mainwall_th = 2.5;
-smallwall_th = 1.5;
+mainwall_th = 3.0;
+smallwall_th = 2.0;
 
-seal_th = 0.3 + 0.6; // total gap for seal etc.
-behind_recess = 1.0;
+seal_th = 0.3 + 0.6 + 0.6 - 0.4 - 0.4 + 0.2; // total gap for seal etc.
+behind_recess = 1.5;
 
-recess_gap_end = 0.2;
+recess_gap_end = 0.4;
 
 lid_edge_th = 0.5;
 
-battery_len = 66.55 + 0.75;
-battery_th = 6.55 + 0.75;
-battery_wdth = 44.38 + 0.75;
+battery_len = 66.55 + 1.25 -.55;
+battery_th = 6.55 + 0.75 - .60;
+battery_wdth = 44.38 + 0.75 -.55;
+
+battery_base_indent = 0.94 + 0.50;
+battery_base_indent_fromside_outside = 4;
+battery_base_indent_fromside_inside = 10;
+
+handle_height = 3.5;
+handle_inward = 10;
+handle_len = 5;
+
+// for testing:
+battery_len = 3;
+//battery_wdth = 15;
+//battery_base_indent_fromside_inside = 6;
 
 // calculated
 
@@ -25,9 +38,15 @@ bpp3 = [ bpp2[0] + (bpp1 - bpp0)[1], bpp0[1] ];
 bpp4 = [ bpp3[0], bpp0[1] + mainwall_th ];
 lppC = bpp3 + [ 0, -recess_gap_end ];
 
+lppF = lppC + [ handle_height, 0 ];
+
 s0 = battery_wdth/2;
+s0i = s0 - battery_th/2;
 s1 = s0 + smallwall_th;
 
+l1 = s1 - handle_inward;
+l0 = l1 - handle_len;
+
 echo(
      bpp0,
      bpp1,
@@ -49,14 +68,14 @@ echo(
 );
 
 bpp8 = bpp0 + [ -battery_len,0 ];
-bpp5 = [ bpp8[0] - smallwall_th, bpp4[0] ];
+bpp5 = [ bpp8[0] - smallwall_th, bpp4[1] ];
 bpp9 = [ bpp0[0], bpp0[1] - battery_th/2 - 1.0 ];
 bpp7 = [ bpp8[0], bpp9[1] ];
 bpp6 = [ bpp5[0], bpp9[1] ];
 lppE = [ lppA[0], bpp9[1] ];
 lppD = [ lppC[0], bpp9[1] ];
 
-module BaseHalfPlan(){
+module BaseHalfPlan(indent=0){
   polygon([ bpp0,
 	    bpp1,
 	    bpp2,
@@ -64,8 +83,8 @@ module BaseHalfPlan(){
 	    bpp4,
 	    bpp5,
 	    bpp6,
-	    bpp7,
-	    bpp8
+	    bpp7 + indent * [1,0],
+	    bpp8 + indent * [1,0]
 	    ]);
 }
 
@@ -86,6 +105,11 @@ module LidHalfPlan(){
 	    ]);
 }
 
+module HandleHalfPlan(){
+  translate(lppE)
+    square(lppF - lppE);
+}
+
 module ExtrudePlan(from,to){
   rotate([0,-90,0])
   for (mj=[0,1]) {
@@ -101,26 +125,46 @@ module ExtrudePlan(from,to){
   }
 }
 
-module PlanDemo(){
+module PlanDemo(){ ////toplevel
   color("blue") BaseHalfPlan();
   color("red") LidHalfPlan();
   translate([0,0,-1]) color("lightblue") SideHalfPlan();
 }
 
-module Base(){
+module Base(){ ////toplevel
   ExtrudePlan(0,s1) BaseHalfPlan();
-  ExtrudePlan(s0,s1) SideHalfPlan();
+  difference(){
+    union(){
+      ExtrudePlan(s0i, s1) SideHalfPlan();
+      ExtrudePlan(s0 - battery_base_indent_fromside_inside,
+		  s0 - battery_base_indent_fromside_outside
+		  ) BaseHalfPlan(indent = battery_base_indent);
+    }
+    for (m=[0,1])
+      mirror([m,0,0])
+	translate([s0i, 0, bpp7[0] - 0.1])
+	cylinder(r= battery_th/2, h=100, $fs=0.5);
+  }
+}
+
+module BaseHalfTest(){ ////toplevel
+  intersection(){
+    Base();
+    translate([-100,0,-100])
+      cube([200,200,200]);
+  }
 }
 
-module Lid(){
+module Lid(){ ////toplevel
   ExtrudePlan(0,s1) LidHalfPlan();
+  ExtrudePlan(l0,l1) HandleHalfPlan();
 }
 
-module Demo(){
+module Demo(){ ////toplevel
   %Base();
   Lid();
 }
 
 //PlanDemo();
-Demo();
+//Demo();
 //Base();