X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=changelog;h=ffad1f19c8b4f4906607b46a4617bf599e123e91;hb=7b3750c8e0971c5962d3fbe505686fada5609b93;hp=de07db0767b31c61de601140370789eef0834690;hpb=508ea71787776cf0d7755a8429aa59348827cd77;p=cura.git

diff --git a/changelog b/changelog
index de07db07..ffad1f19 100644
--- a/changelog
+++ b/changelog
@@ -1,11 +1,32 @@
 Development
+* Added an expert parameter for the wipe tower size, and made brim go around the wipe tower
+* Added experimental support for printing with the Doodle3D WiFi box
+* Updated object boundaries for multi-object prints, allows for tighter fitting of objects on the build platform
+* Updated time-estimate to greatly improve accuracy of the estimate.
+* Fixed problem with retractions not happening when they should.
+* Added keyboard control for the 3D window to look around with cursor keys.
+
+Ultimaker2 - Firmware update - 13.12
+* Fixed the problem where aborting a print did not always home the head.
+* Fixed bug in acceleration planning causing slow moves on rare occasions.
+* Disable the normal menus during USB printing, and support for USB based menus.
+* Disable stepper drivers after print is finished or aborted, so you can manually move the head.
+* Expert feature: Support M907 for setting the motor current.
+
+Ultimaker Original - Firmware update - 13.12
+* Fixed bug in acceleration planning causing slow moves on rare occasions.
+* Updated to new ErikZalm Marlin base, fixing the long standing slower retraction bug.
+
+13.11.2
 * Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend.
 * Added disallowed zones for UM2
 * Added ooze-shield for dual-color printing
 * Added wipe tower for dual-extrusion
 * Added no-go zones for UM2 glass clips
 
-Ultimaker2 - Firmware update - 13.11-1
+Ultimaker2 - Firmware update - 13.11-2
+* Fixed UM2 build volume offset so that you do not print off the glass plate.
+* Slightly tweaked the filament change procedure so there is less chance of a blob staying behind.
 * Slightly tweaked the SD-Card error problems.
 * Added LED settings to Tune menu
 * Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot.