X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=changelog;h=3e4aa38ff5a36b12f0d229e0d839c0bd926088ff;hb=5a36bdc9e35761f52c03fbd218f8eb6c610d3e60;hp=de07db0767b31c61de601140370789eef0834690;hpb=508ea71787776cf0d7755a8429aa59348827cd77;p=cura.git

diff --git a/changelog b/changelog
index de07db07..3e4aa38f 100644
--- a/changelog
+++ b/changelog
@@ -1,11 +1,15 @@
 Development
+
+13.11.2
 * Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend.
 * Added disallowed zones for UM2
 * Added ooze-shield for dual-color printing
 * Added wipe tower for dual-extrusion
 * Added no-go zones for UM2 glass clips
 
-Ultimaker2 - Firmware update - 13.11-1
+Ultimaker2 - Firmware update - 13.11-2
+* Fixed UM2 build volume offset so that you do not print off the glass plate.
+* Slightly tweaked the filament change procedure so there is less chance of a blob staying behind.
 * Slightly tweaked the SD-Card error problems.
 * Added LED settings to Tune menu
 * Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot.