X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=changelog;h=34f2c1904706e0c1bc76dce91eb7d167647f8f00;hb=de09f1522afc13206981068df0463672707d6905;hp=49d4de80d88b23207d58a971dde084be9311aa73;hpb=9ebd11ed932d76850b849f29e0689d19e7618780;p=cura.git

diff --git a/changelog b/changelog
index 49d4de80..34f2c190 100644
--- a/changelog
+++ b/changelog
@@ -1,4 +1,35 @@
 Development
+* Added an expert parameter for the wipe tower size, and made brim go around the wipe tower
+* Added experimental support for printing with the Doodle3D WiFi box
+* Updated object boundaries for multi-object prints, allows for tighter fitting of objects on the build platform
+* Updated time-estimate to greatly improve accuracy of the estimate.
+* Fixed problem with retractions not happening when they should.
+
+Ultimaker2 - Firmware update - 13.12
+* Fixed bug in acceleration planning causing slow moves on rare occasions.
+* Disable the normal menus during USB printing, and support for USB based menus.
+* Expert feature: Support M907 for setting the motor current.
+
+Ultimaker Original - Firmware update - 13.12
+* Fixed bug in acceleration planning causing slow moves on rare occasions.
+* Updated to new ErikZalm Marlin base, fixing the long standing slower retraction bug.
+
+13.11.2
+* Adjusted the gantry height to 55mm for the Ultimaker, as 60mm was 3mm to high for the default setup with an V2 hotend.
+* Added disallowed zones for UM2
+* Added ooze-shield for dual-color printing
+* Added wipe tower for dual-extrusion
+* Added no-go zones for UM2 glass clips
+
+Ultimaker2 - Firmware update - 13.11-2
+* Fixed UM2 build volume offset so that you do not print off the glass plate.
+* Slightly tweaked the filament change procedure so there is less chance of a blob staying behind.
+* Slightly tweaked the SD-Card error problems.
+* Added LED settings to Tune menu
+* Start heating the nozzles when the bed is nearing its final temperature, so the nozzles do not sit hot.
+* Make sure all commands are finished before starting a print or changing material. This could cause issues when you where too fast.
+
+13.11
 * Added imageToMesh tool to load images as 3D height maps
 * Fixed Z support distance when using "everywhere" support.
 * Updated to new version of clipper to fix rare slicing bugs that resulted in odd paths.
@@ -11,7 +42,7 @@ Development
 * Fixed skirt and brim to go around the support instead of under it.
 * Added spiralize mode
 
-Ultimaker2 - Firmware update - xx.xx-xx
+Ultimaker2 - Firmware update - 13.10-5
 * Fixed SD-Card read error
 * Added feature to store your own material presets
 * Fixed the 280C ABS problem, causing a temperature sensor error