X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=bike-lipo-box.scad;h=b8a6e424c8b6964703c43ba041beb7c56755236a;hb=92af6ed83ac2df14bf5bce61a44e2419c248916e;hp=f193341e598e58025df5153fa77473daf043ff41;hpb=ca1fcb6a227583f1a55836bd2767d0c15d1a521d;p=reprap-play.git

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index f193341..b8a6e42 100644
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -2,6 +2,8 @@
 
 include <commitid.scad>
 include <utils.scad>
+include <sealing-box.scad>
+include <bike-lipo-box-gland.scad>
 
 pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
 pxp6012_rad_outer = 32.0 / 2 - 0.5;
@@ -15,8 +17,28 @@ s1930_recess = 3;
 s1930_around = 3;
 s1930_behind = 3;
 
+totx_inner = 180;
+toty_outer = 95;
+totz_inner = 28.0;
+
 wallthick = 2.5;
 
+cabledia = 8.7;
+
+strap_w = 5;
+strap_th = 4;
+strap_pillar = 3;
+strap_pillard = 5;
+strap_over = 2;
+
+// calculated
+
+totx_outer = totx_inner + wallthick*2;
+toty_inner = toty_outer - wallthick*2;
+totz_outer = totz_inner + wallthick*2;
+
+sb_box_sz = [totx_outer, totz_outer, toty_inner];
+
 // origin is at centre on outer face wall
 // outside is towards positive x
 // mounting is vertical
@@ -68,38 +90,39 @@ module TestWall(){ ////toplevel
   }    
 }
 
-floorth = 2.5;
-ceilth = 2.5;
-innertube = 1.0 + 0.2;
-lidoverlap = 1.5;
-lidoverhang = 6;
-tubesealrad = 2.0;
+ts_totx = 30;
+ts_toty = 25;
+ts_totz_inner = 8;
 
-ts_xbox = 30;
-ts_ybox = 25;
-ts_cnrrad = 10;
-ts_zbox = 8;
+ts_box_sz = [ts_totx, ts_toty, ts_totz_inner];
 
-include <sealing-box.scad>
+$sealingbox_wallth = wallthick;
+$sealingbox_floorth = wallthick;
+$sealingbox_ceilth = wallthick;
 
 module TestSealBox(){ ////toplevel
-  TestSealBoxBox();
+  $sealingbox_sz = ts_box_sz;
+
+  SealingBox_RectBox();
+  ts_cidoff = ($sealingbox_cnrrad * (1-.7) + wallthick * .8) * [1,1];
   translate(ts_cidoff)
-    Commitid_BestCount([ts_xbox,ts_ybox] - 2*ts_cidoff);
+    Commitid_BestCount([ts_totx,ts_toty] - 2*ts_cidoff);
 }
 
 module TestSealLid(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
   difference(){
-    TestSealBoxLid();
+    SealingBox_RectLid();
 
-    translate([ts_xbox * .75, ts_ybox/2, 0])
+    translate([ts_totx * .75, ts_toty/2, 0])
       cylinder(h=100, r=5);
     
-    translate([-wallthick + ts_cnrrad*.5,
-	       ts_cnrrad*.5 - wallthick,
-	       ts_zbox + ceilth])
-      Commitid_BestCount([ts_xbox * .75 - 2.5 - (ts_cnrrad*.5),
-			  ts_ybox - (ts_cnrrad*.5 - wallthick)*2]);
+    translate([-wallthick + $sealingbox_cnrrad*.5,
+	       $sealingbox_cnrrad*.5 - wallthick,
+	       ts_totz_inner + $sealingbox_ceilth])
+      Commitid_BestCount([ts_totx * .75 - 2.5 - ($sealingbox_cnrrad*.5),
+			  ts_toty - ($sealingbox_cnrrad*.5 - wallthick)*2]);
   }
 }
 
@@ -108,12 +131,73 @@ module TestSealLidPrint(){ ////toplevel
 }
 
 module ProfileDemos(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
   SealingBox_WallProfile();
   color("blue") SealingBox_FloorProfile();
   SealingBox_LidProfile();
   color("blue") SealingBox_CeilProfile();
+  color("red") translate([-5,0]) square([1,ts_totz_inner]);
+}
+
+module AtGlands(){
+  for (dgy=[-15,-45]) {
+    translate([totx_inner + wallthick - $sealingbox_cnrrad * .3,
+	       toty_inner + dgy,
+	       totz_inner/2])
+      children();
+  }
 }
-			  
+
+module Box(){ ////toplevel
+  $sealingbox_sz = sb_box_sz;
+
+  chargingconn_x = pxp6012_rad_outer + 1 + $sealingbox_cnrrad;
+  switch_x = chargingconn_x + pxp6012_rad_outer
+    + s1930_y_outer/2 + s1930_around;
+
+  strap_x_tot = strap_w + strap_pillar*2;
+
+  difference(){
+    union(){
+      rotate([90,0,0])
+	translate([-wallthick,-wallthick, -toty_inner])
+	SealingBox_RectBox();
+
+      translate([switch_x, toty_inner, totz_inner/2])
+	rotate([90,0,90])
+	S1930_Positive();
+
+      // keepers for lipo
+      for (kx= [ 40, 80, 120 ]) {
+	translate([kx, 40, -1])
+	  cube([10, 5, 8 +1]);
+      }
+
+      AtGlands()
+	GlandPositive(cabledia);
+    }
+
+    // charging connector
+    translate([chargingconn_x,
+	       toty_inner - (pxp6012_rad_outer + 5),
+	       10])
+      cylinder(r= pxp6012_rad, h= totz_outer);
+
+    translate([switch_x, toty_inner, totz_inner/2])
+      rotate([90,0,90])
+      S1930_Negative();
+
+    AtGlands()
+      GlandNegative(cabledia);
+  }
+}
+
+module BoxPrint(){ ////toplevel
+  rotate([-90,0,0])
+    Box();
+}
+
 //TestWall();
 //ProfileDemos();
 //TestSealBox();