X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=bike-lipo-box.scad;h=850200b498a0c75c579fdcdd45c7b4285913ae50;hb=cb70e9ce70a09843870323314ebf939cbb9b35f0;hp=f173f9715aeba0158d96304b6eedf7d01b8a6978;hpb=fb46d813ea7050df70347a5ba6397455649dcd65;p=reprap-play.git

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index f173f97..850200b 100644
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -2,6 +2,7 @@
 
 include <commitid.scad>
 include <utils.scad>
+include <sealing-box.scad>
 
 pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
 pxp6012_rad_outer = 32.0 / 2 - 0.5;
@@ -68,43 +69,39 @@ module TestWall(){ ////toplevel
   }    
 }
 
-totx_outer = 30;
-toty_outer = 25;
-totz_inner = 8;
-
-$sealingbox_wallth = wallthick;
-$sealingbox_floorth = 2.5;
-$sealingbox_ceilth = 2.5;
-$sealingbox_xbox = totx_outer;
-$sealingbox_ybox = toty_outer;
-$sealingbox_zbox = totz_inner;
+ts_totx = 30;
+ts_toty = 25;
+ts_totz_inner = 8;
 
-innertube = 1.0 + 0.2;
-lidoverlap = 1.5;
-lidoverhang = 6;
-tubesealrad = 2.0;
+ts_box_sz = [ts_totx, ts_toty, ts_totz_inner];
 
-include <sealing-box.scad>
+$sealingbox_wallth = wallthick;
+$sealingbox_floorth = wallthick;
+$sealingbox_ceilth = wallthick;
 
 module TestSealBox(){ ////toplevel
-  TestSealBoxBox();
+  $sealingbox_sz = ts_box_sz;
+
+  SealingBox_RectBox();
   ts_cidoff = ($sealingbox_cnrrad * (1-.7) + wallthick * .8) * [1,1];
   translate(ts_cidoff)
-    Commitid_BestCount([totx_outer,toty_outer] - 2*ts_cidoff);
+    Commitid_BestCount([ts_totx,ts_toty] - 2*ts_cidoff);
 }
 
 module TestSealLid(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
   difference(){
-    TestSealBoxLid();
+    SealingBox_RectLid();
 
-    translate([totx_outer * .75, toty_outer/2, 0])
+    translate([ts_totx * .75, ts_toty/2, 0])
       cylinder(h=100, r=5);
     
     translate([-wallthick + $sealingbox_cnrrad*.5,
 	       $sealingbox_cnrrad*.5 - wallthick,
-	       totz_inner + $sealingbox_ceilth])
-      Commitid_BestCount([totx_outer * .75 - 2.5 - ($sealingbox_cnrrad*.5),
-			  toty_outer - ($sealingbox_cnrrad*.5 - wallthick)*2]);
+	       ts_totz_inner + $sealingbox_ceilth])
+      Commitid_BestCount([ts_totx * .75 - 2.5 - ($sealingbox_cnrrad*.5),
+			  ts_toty - ($sealingbox_cnrrad*.5 - wallthick)*2]);
   }
 }
 
@@ -113,11 +110,13 @@ module TestSealLidPrint(){ ////toplevel
 }
 
 module ProfileDemos(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
   SealingBox_WallProfile();
   color("blue") SealingBox_FloorProfile();
   SealingBox_LidProfile();
   color("blue") SealingBox_CeilProfile();
-  color("red") translate([-5,0]) square([1,totz_inner]);
+  color("red") translate([-5,0]) square([1,ts_totz_inner]);
 }
 			  
 //TestWall();