X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=bike-lipo-box.scad;h=850200b498a0c75c579fdcdd45c7b4285913ae50;hb=cb70e9ce70a09843870323314ebf939cbb9b35f0;hp=e03d45c7aaca0324b6e825a8d812b5de573cc7f6;hpb=f4b292ecf8dc222722d86489316952844ded1924;p=reprap-play.git

diff --git a/bike-lipo-box.scad b/bike-lipo-box.scad
index e03d45c..850200b 100644
--- a/bike-lipo-box.scad
+++ b/bike-lipo-box.scad
@@ -1,6 +1,10 @@
 // -*- C -*-
 
-pxp6012_rad = 22.5 / 2 + 0.5;
+include <commitid.scad>
+include <utils.scad>
+include <sealing-box.scad>
+
+pxp6012_rad = 22.5 / 2 + 0.5; // make circular hole this size in outer wall
 pxp6012_rad_outer = 32.0 / 2 - 0.5;
 
 s1930_y = 30.2 + 0.2;
@@ -9,10 +13,32 @@ s1930_y_outer = 36.4 + 0.2;
 s1930_x_outer = 27.6 + 0.2;
 
 s1930_recess = 3;
+s1930_around = 3;
+s1930_behind = 3;
+
+wallthick = 2.5;
 
-wallthick = 3.0;
+// origin is at centre on outer face wall
+// outside is towards positive x
+// mounting is vertical
+module S1930_Positive(){
+  d = s1930_recess + s1930_behind;
+  translate([-d/2, 0,0])
+    cube([d,
+	  s1930_x_outer + s1930_around,
+	  s1930_y_outer + s1930_around], center=true);
+}
+module S1930_Negative(){
+  cube([60, s1930_x, s1930_y],
+       center=true);
+  translate([1, 0,0])
+    cube([s1930_recess*2+2, s1930_x_outer, s1930_y_outer],
+	 center=true);
+}
+
+module TestWall(){ ////toplevel
+  sw_ctr = [25, wallthick, 25];
 
-module TestWall(){
   rotate([0,0,-90]){
     difference(){
       union(){
@@ -22,8 +48,79 @@ module TestWall(){
       translate([30, -1, 20])
 	rotate([-90,0,0])
 	cylinder(r = pxp6012_rad, h=10, $fn=60);
+
+      rotate([90,0,0])
+	Commitid_BestCount([15,40]);
     }
   }
+
+  difference(){
+    union(){
+      cube([50, wallthick, 50]);
+      translate(sw_ctr)
+	rotate([0,0,90])
+	S1930_Positive();
+    }
+
+    translate(sw_ctr) {
+      rotate([0,0,90])
+	S1930_Negative();
+    }
+  }    
 }
 
-TestWall();
+ts_totx = 30;
+ts_toty = 25;
+ts_totz_inner = 8;
+
+ts_box_sz = [ts_totx, ts_toty, ts_totz_inner];
+
+$sealingbox_wallth = wallthick;
+$sealingbox_floorth = wallthick;
+$sealingbox_ceilth = wallthick;
+
+module TestSealBox(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
+  SealingBox_RectBox();
+  ts_cidoff = ($sealingbox_cnrrad * (1-.7) + wallthick * .8) * [1,1];
+  translate(ts_cidoff)
+    Commitid_BestCount([ts_totx,ts_toty] - 2*ts_cidoff);
+}
+
+module TestSealLid(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
+  difference(){
+    SealingBox_RectLid();
+
+    translate([ts_totx * .75, ts_toty/2, 0])
+      cylinder(h=100, r=5);
+    
+    translate([-wallthick + $sealingbox_cnrrad*.5,
+	       $sealingbox_cnrrad*.5 - wallthick,
+	       ts_totz_inner + $sealingbox_ceilth])
+      Commitid_BestCount([ts_totx * .75 - 2.5 - ($sealingbox_cnrrad*.5),
+			  ts_toty - ($sealingbox_cnrrad*.5 - wallthick)*2]);
+  }
+}
+
+module TestSealLidPrint(){ ////toplevel
+  rotate([180,0,0]) TestSealLid();
+}
+
+module ProfileDemos(){ ////toplevel
+  $sealingbox_sz = ts_box_sz;
+
+  SealingBox_WallProfile();
+  color("blue") SealingBox_FloorProfile();
+  SealingBox_LidProfile();
+  color("blue") SealingBox_CeilProfile();
+  color("red") translate([-5,0]) square([1,ts_totz_inner]);
+}
+			  
+//TestWall();
+//ProfileDemos();
+//TestSealBox();
+//TestSealLid();
+//FArcSegment_mask(350);