X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;f=Cura%2Futil%2Fprofile.py;h=74ae3a43db0eb25c04ec41aae53049f8fc312603;hb=58992f08e0bc4fe6761a595a62e66517e98b4a9a;hp=7e0f90dced8d0030c57459e3fbb23bf5d207ffb3;hpb=8f1798e1b7c8a65d5ca1e0e979a04aa8bba70c20;p=cura.git

diff --git a/Cura/util/profile.py b/Cura/util/profile.py
index 7e0f90dc..74ae3a43 100644
--- a/Cura/util/profile.py
+++ b/Cura/util/profile.py
@@ -181,7 +181,7 @@ setting('retraction_minimal_extrusion',0.1, float,'expert',  _('Retraction')).se
 setting('bottom_thickness',          0.3, float, 'advanced', _('Quality')).setRange(0).setLabel(_("Initial layer thickness (mm)"), _("Layer thickness of the bottom layer. A thicker bottom layer makes sticking to the bed easier. Set to 0.0 to have the bottom layer thickness the same as the other layers."))
 setting('object_sink',               0.0, float, 'advanced', _('Quality')).setLabel(_("Cut off object bottom (mm)"), _("Sinks the object into the platform, this can be used for objects that do not have a flat bottom and thus create a too small first layer."))
 #setting('enable_skin',             False, bool,  'advanced', _('Quality')).setLabel(_("Duplicate outlines"), _("Skin prints the outer lines of the prints twice, each time with half the thickness. This gives the illusion of a higher print quality."))
-setting('overlap_dual',              0.2, float, 'advanced', _('Quality')).setLabel(_("Dual extrusion overlap (mm)"), _("Add a certain amount of overlapping extrusion on dual-extrusion prints. This bonds the different colors better together."))
+setting('overlap_dual',             0.15, float, 'advanced', _('Quality')).setLabel(_("Dual extrusion overlap (mm)"), _("Add a certain amount of overlapping extrusion on dual-extrusion prints. This bonds the different colors better together."))
 setting('travel_speed',            150.0, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Travel speed (mm/s)"), _("Speed at which travel moves are done, a high quality build Ultimaker can reach speeds of 250mm/s. But some machines might miss steps then."))
 setting('bottom_layer_speed',         20, float, 'advanced', _('Speed')).setRange(0.1).setLabel(_("Bottom layer speed (mm/s)"), _("Print speed for the bottom layer, you want to print the first layer slower so it sticks better to the printer bed."))
 setting('infill_speed',              0.0, float, 'advanced', _('Speed')).setRange(0.0).setLabel(_("Infill speed (mm/s)"), _("Speed at which infill parts are printed. If set to 0 then the print speed is used for the infill. Printing the infill faster can greatly reduce printing, but this can negatively effect print quality.."))