X-Git-Url: http://www.chiark.greenend.org.uk/ucgi/~ianmdlvl/git?a=blobdiff_plain;ds=sidebyside;f=slic3r-config.ini;h=aced125e606c1b02a7d4984e4e8edb77b665861b;hb=d96e58604ff0c4c448472e7c7a97b67eb2640f03;hp=48661cdb2ed66e8e66b01876ce02dc217288d1b9;hpb=0c3cc787a3c5aee6c9197b2da094283bd8fee495;p=reprap-play.git

diff --git a/slic3r-config.ini b/slic3r-config.ini
index 48661cd..aced125 100644
--- a/slic3r-config.ini
+++ b/slic3r-config.ini
@@ -1,13 +1,13 @@
-# generated by Slic3r 0.9.1 on Thu Aug 23 19:44:16 2012
+# generated by Slic3r 0.9.1 on Sun Oct 14 23:13:04 2012
 acceleration = 0
 bed_size = 140,140
-bed_temperature = 80
+bed_temperature = 90
 bridge_fan_speed = 100
 bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 complete_objects = 0
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
@@ -19,7 +19,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1
+extrusion_multiplier = 0.9
 extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
@@ -27,7 +27,7 @@ filament_diameter = 1.77
 fill_angle = 45
 fill_density = 0.2
 fill_pattern = rectilinear
-first_layer_bed_temperature = 70
+first_layer_bed_temperature = 80
 first_layer_extrusion_width = 200%
 first_layer_height = 0.4
 first_layer_speed = 30%
@@ -64,7 +64,7 @@ retract_restart_extra = 0
 retract_speed = 30
 rotate = 0
 scale = 1
-skirt_distance = 12
+skirt_distance = 3
 skirt_height = 1
 skirts = 2
 slowdown_below_layer_time = 15
@@ -72,7 +72,7 @@ small_perimeter_speed = 30
 solid_fill_pattern = rectilinear
 solid_infill_speed = 60
 solid_layers = 3
-start_gcode = G28 ; home all axes
+start_gcode = G28 ; home all axes\nG1 Z10 F1000
 support_material = 0
 support_material_angle = 0
 support_material_extruder = 1
@@ -80,7 +80,7 @@ support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_threshold = 45
-temperature = 210
+temperature = 215
 threads = 8
 top_solid_infill_speed = 50
 travel_speed = 130