function deg2rad(deg) = deg/360 * tau;
function rad2deg(rad) = rad/tau * 360;
-module SplitPin(w=0.8, holeminrad=2.50, thick=3, deviationrad=1.0,
- mainlen=10, handlerad=10, handlelen=7) {
- spare = holeminrad - deviationrad - w;
+module SplitPin(w=1.5, holeminrad=2.50, thick=3, deviationrad=1.5,
+ mainlen=15, handlerad=20, handlelen=12) {
+ spare = holeminrad*2 - deviationrad - w*2;
echo("splitpin spare",spare);
%translate([0,mainlen+handlelen,0]) cylinder(r=spare, h=thick);
%translate([0,mainlen,thick/2]) rotate([90,0,0])
// translate([unbent_dx, 5, 10]) %cube([10,10,10]);
// }
- for (xmir=[0,1]) mirror([xmir,0,0]) {
- linear_extrude(height=thick) {
+ linear_extrude(height=thick) {
+ for (xmir=[0,1]) mirror([xmir,0,0])
FlatArc(0,0, w*0.5, w*1.5, 270-1,360);
- translate([w*1.5, 0, 0]) {
- FlatArc($fa=1, main_cx,0, unbent_rad, unbent_rad+w,
- 180-unbent_subang, 180);
- translate([corner_x, corner_y])
- rotate([0,0,-unbent_subang]) {
+ translate([w*1.5, 0, 0]) {
+ FlatArc($fa=1, main_cx,0, unbent_rad, unbent_rad+w,
+ 180-unbent_subang, 180);
+ translate([corner_x, corner_y]) rotate([0,0,-unbent_subang]) {
+ rotate([0,0,10])
+ translate([w*0.2,0,0])
translate([-(w + deviationrad), -0.1])
- square(size=[w + deviationrad, w+0.1]);
- FlatArc(-deviationrad + handlerad, w,
- handlerad, handlerad+w,
- 180-rad2deg(handlelen/handlerad), 180,
- $fa=0.25, $fn=60);
- }
+ square(size=[w + deviationrad, w+0.1]);
+ FlatArc(-deviationrad + handlerad, w,
+ handlerad, handlerad+w,
+ 180-rad2deg(handlelen/handlerad), 180+rad2deg(w/handlerad),
+ $fa=0.25, $fn=60);
}
}
+ mirror([1,0,0]) translate([w*1.5, 0, 0])
+ FlatArc($fa=1, main_cx,0, unbent_rad, unbent_rad+w,
+ 180-(unbent_subang + rad2deg((handlelen+w)/unbent_rad)), 180);
}
}
-module SplitPinCavity(w=0.8, holeminrad=2.50, thick=3, deviationrad=1.0,
- mainlen=10, slop=0.5, insertby = 5) {
+module SplitPinCavity(w=1.5, holeminrad=2.50, thick=3, deviationrad=1.5,
+ mainlen=15, slop=0.5, insertby = 5) {
smallgap2 = holeminrad;
biggap2 = smallgap2 + deviationrad + slop;
toegap2 = w*1.5 + slop;
linear_extrude(height = thick + slop*2) {
for (xmir=[0,1]) mirror([xmir,0]) {
polygon([[-0.1, 1],
- [biggap2, 1],
+ [(smallgap2+biggap2)/2, 1],
[smallgap2, -insertby],
[biggap2, -insertby],
[toegap2, toeend-1],
}
SplitPin();
-translate([0,30,0])
+translate([0,15+5,-10])
+ rotate([-90,0,0])
SplitPinCavity();