phone_button_z = 6.58;
minwall = 0.50;
+expose = 4.00;
+
cutout_dia = 7;
cutout_between = 5;
button_dz = 1.35;
+button_dz_centre = 1.35 + 0.75;
+button_dz_outer = 1.35;
button_dy_outer = 28.42;
button_dy_inner = 19.05;
plug_maxw = 10.95 + 0.35;
plug_minw= 6.53 + 0.35;
plug_sllen= 6.50;
-plug_totlen = 84.90 - 1.5; // to maxw, including phone
+plug_totlen = 84.90 + 1.5; // to maxw, including phone
plug_h = 6.5;
plug_tooth_h = 0.5;
plug_tooth_dy = 0.5;
keeper_prong = 2;
-keeper_stalk_basewidth = 4;
+keeper_stalk_basewidth = 6;
keeper_stalk_len = 70;
-keeper_stalk_gap = 2;
+keeper_stalk_gap = 1;
keeper_stalk_thick = wall_bot;
+keeper_stalk_base_reinforce_len = 5;
+keeper_stalk_base_reinforce_thick = 2.0;
+
// calculated
top_z = max( phone[2] + wall[2],
module MainProfileInnerHalf(){
p = phone + phone_slop;
- pb = p[2] + button_dz;
+ pbc = p[2] + button_dz_centre;
+ pbo = p[2] + button_dz_outer;
polygon([[ -2, 0 ],
[ p[1]/2, 0 ],
[ p[1]/2, p[2] ],
[ button_dy_outer/2, p[2] ],
- [ button_dy_outer/2, pb ],
- [ button_dy_inner/2, pb ],
+ [ button_dy_outer/2, pbo ],
+ [ button_dy_inner/2, pbo ],
[ button_dy_inner/2, p[2] ],
[ button_dy_centre/2, p[2] ],
- [ button_dy_centre/2, pb ],
- [ -2, pb ]]);
+ [ button_dy_centre/2, pbc ],
+ [ -2, pbc ]]);
}
module MainProfile(){
module BoxMain(){
rotate([0,0,90]) rotate([90,0,0]) {
- linear_extrude(height = phone[0] + wall[0], convexity=20)
+ translate([0,0, expose])
+ linear_extrude(height = phone[0] + wall[0] - expose, convexity=20)
MainProfile();
translate([0,0, phone[0]])
linear_extrude(height = wall[0], convexity=20)
}
}
-module KeeperProjection(){
- projection()
- rotate([0,90,0])
- linear_extrude(height= 20)
- projection()
- PlugKeeper();
-}
-
module Box(){
+ sidewall_cutout_z = phone[2] + phone_slop[2] + button_dz_outer;
+
difference(){
BoxMain();
ys * (cutout_between/2 + cutout_dia/2),
-10 ])
cylinder( r= cutout_dia/2, h = 50, $fn = 20 );
+
+ translate([expose, ys*phone[1]/2, sidewall_cutout_z/2])
+ rotate([90,0,0])
+ translate([0,0,-3])
+ cylinder( r= sidewall_cutout_z/2 - 0.1, h=6 , $fn=20 );
}
}
translate([0,0, -keeper_stalk_thick])
linear_extrude(height = keeper_stalk_thick)
PlugKeeperStalkProfile();
+
+ translate([ plugkeeper_x_maxw + keeper_stalk_len +
+ -keeper_stalk_base_reinforce_len/2,
+ -keeper_stalk_basewidth/2,
+ 0 ])
+ mirror([0,0,1])
+ cube([ keeper_stalk_base_reinforce_len,
+ keeper_stalk_basewidth,
+ keeper_stalk_base_reinforce_thick ]);
}
module BoxPrint(){
// This makes' Cura's support more optimal: specifically,
// it then doesn't seem to touch the back (bottom) wall
- rotate([0,90,0])
+ translate([0,0,phone[0]])
+ rotate([0,90,0])
Box();
}
//MainProfileInnerHalf();
//MainProfile();
-//KeeperProjection();
//Box();
BoxPrint();