translate(concat(botleft, [0]))
cube(concat(size, [tile_th]));
if (!TEST) {
+ cidsz = topright_post-botleft_post
+ + [-post_dia,-post_dia]
+ + [0, thehd[1]];
+ cidszr = [ min(cidsz[0],50), min(cidsz[1],50) ];
+ echo("CID",cidsz,cidszr);
translate( concat(botleft_post, [ -tile_th ])
- + 0.5 * [ post_dia, post_dia, 0 ] )
- Commitid_BestCount_M( topright_post-botleft_post
- + [-post_dia,-post_dia]
- + [0, thehd[1]]);
+ + 0.5 * [ post_dia, post_dia, 0 ]
+ + 0.5 * concat( cidsz - cidszr, [ 0 ]) )
+ Commitid_BestCount_M(cidszr);
}
if (TEST) {
- translate( concat(botleft + [thehd[0], 0], [0]) )
- Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+ crossoff = tile_hard_edge_hole_dist + POST_TCROSSSZ/2;
+ cidsz = [ thehd[0], size[1] - 2*crossoff ];
+ cidszr = [ cidsz[0], min(cidsz[1], 50) ];
+ translate( concat(botleft + [0, crossoff] + (cidsz-cidszr)/2, [0]) )
+ Commitid_BestCount(cidszr);
difference(){
mirror([0,0,1]) {
translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
}
}
-module Machine_RearProfile(){
+module Machine_NewRearProfile(){
+ // figures copied out of xfig edit boxes
+ // best not to edit the posbox size if poss - just move it
+ posbox = 10 * ([7.2333,-14.1267] - [-16.2289,40.0289]); // box, Green
+ sideline = -10 * ([-6.2400,13.5600] - [-2.4467,28.2556]); // line, Blue
+ scaleline = 10 * dist2d([-1.1911,-20.4800], [-11.2600,4.0578]); // Green2
+ scaleline_mm = 12+5+10+5+3;
+ sh = -[abs(posbox[0]), abs(posbox[1])];
+ rot = atan2(-sideline[0], sideline[1]);
+ sc = scaleline_mm / scaleline;
+ echo("SH",sh,rot,sc);
+ scale(sc) rotate(rot) translate(sh){
+ import("sewing-table-rear-profile.dxf", convexity=10); // spline, Pink3
+ }
+}
+
+module Machine_NewRearCurve(){
+ intersection(){
+ rotate_extrude(convexity=10, $fn=32)
+ rotate(90)
+ translate([ 0, -rearcurve_double_inrad ])
+ Machine_NewRearProfile();
+ translate([0,0,-500])
+ cube([500,500,1000]);
+ }
+}
+
+module Machine_RearProfile(){ ////toplevel
intersection(){
Machine_Profile();
translate([ -200 + machine_rear_to_front/2, -100 ]) {
Machine_Arm();
Machine_Curves();
}
-
+
function Rectangle_corners(c0, sz) =
// returns the corners of a rectangle from c0 to c0+sz
// if sz is positive, the corners are anticlockwise starting with c0
m4_dnl that denoted by ix, and the next one anticlockwise
m4_define(`R_EDGE',`$1[$2],$1[(($2)+1)%4]')
+module FitTest(){ ////toplevel
+ sz = [280,180];
+ c0 = [-50,-80];
+ c = Rectangle_corners(c0, sz);
+ brace = [7,7,9];
+ difference(){
+ union(){
+ Rectangle_TileBase(c);
+ translate(concat(c0, [-brace[2] + 0.1])){
+ difference(){
+ cube(concat(sz,[brace[2]]) - [5,0,0]);
+ translate(brace + [0,0, -25])
+ cube(concat(sz, [50]) - brace*2 + [10,0,0]);
+ }
+ }
+ RoundEdge(R_EDGE(c,1));
+ }
+ Machine();
+ }
+}
+
module Tile02(){ ////toplevel
sz = [100,170];
c0 = tile02_tr + -sz;
//Demo();
//Machine_Profile();
-//Machine_RearProfile();
+//Machine_NewRearProfile();
+//Machine_NewRearCurve();