sewing-table: shrink test commitid

[reprap-play.git] / sewing-table.scad.m4

diff --git a/sewing-table.scad.m4 b/sewing-table.scad.m4
index 2231e3fbb3320d5ff1aac22da196725bf2866ed9..41dfdc7368ebed289dc67afe5beacf8e6e366768 100644 (file)
--- a/sewing-table.scad.m4
+++ b/sewing-table.scad.m4
@@ -30,6 +30,8 @@ demo_slop = 0.1;
 
 // calculated
 
+TEST = false;
+
 ply_edge_hole_dist = ply_edge_min + ply_hole_dia/2;
 
 echo(str("HOLES IN PLY ctr dist from PLY edge = ", ply_edge_hole_dist));
@@ -63,6 +65,14 @@ module Post(){
        cylinder(r= screw_dia/2, h= ply_th, $fn=20);
       }
     }
+    if (TEST) {
+      tsz = tile_hard_edge_hole_dist - test_edge + 1;
+      tth = tile_th - test_tile_th + 0.1;
+      translate([0,0, tth/2 + test_tile_th - 0.1]) {
+       cube([post_dia, tsz*2, tth], center=true);
+       cube([tsz*2, post_dia, tth], center=true);
+      }
+    }
   }
 }
 
@@ -81,11 +91,20 @@ module TileBase(botleft, topright){
     mirror([0,0,1])
       translate(concat(botleft, [0]))
       cube(concat(size, [tile_th]));
-    translate( concat(botleft_post, [-tile_th])
-              + 0.5 * [ post_dia, post_dia, 0 ] )
-      Commitid_BestCount_M( topright_post-botleft_post
-                           + [-post_dia,-post_dia]
-                           + [0, thehd[1]]);
+    if (!TEST) {
+      translate( concat(botleft_post, [ -tile_th ])
+                + 0.5 * [ post_dia, post_dia, 0 ] )
+       Commitid_BestCount_M( topright_post-botleft_post
+                             + [-post_dia,-post_dia]
+                             + [0, thehd[1]]);
+    }
+    if (TEST) {
+      translate( concat(botleft + [thehd[0], 0], [0]) )
+       Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
+      mirror([0,0,1])
+       translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
+       cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+    }
   }
 }
 
@@ -121,7 +140,9 @@ module RoundEdge(left_cnr, right_cnr) {
   }
 }
 
-module RoundCornerCut(this_cnr, right_cnr) {
+module RoundCornerCut(ci) {
+  this_cnr = ci[0];
+  right_cnr = ci[1];
   offr= round_cnr_rad - round_edge_rad;
   INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
     difference(){
@@ -132,7 +153,9 @@ module RoundCornerCut(this_cnr, right_cnr) {
   }
 }
 
-module RoundCornerAdd(this_cnr, right_cnr) {
+module RoundCornerAdd(ci) {
+  this_cnr = ci[0];
+  right_cnr = ci[1];
   bigr = round_cnr_rad - round_edge_rad;
   INREFFRAME(this_cnr, right_cnr) INREFFRAME_EDGE {
     intersection(){
@@ -282,6 +305,7 @@ module Tile02(){ ////toplevel
   c0 = -sz;
   c = Rectangle_corners(c0, sz);
   posts = Rectangle_corners2posts(c);
+  rcs = [c[0], c[1]];
   difference(){
     union(){
       TileBase(c[0], c[2]);
@@ -291,9 +315,9 @@ module Tile02(){ ////toplevel
       InterlockEdge(c[2], c[3], 0);
     }
     InterlockEdge(c[1], c[2], 1);
-    RoundCornerCut(c[0], c[1]);
+    RoundCornerCut(rcs);
   }
-  RoundCornerAdd(c[0], c[1]);
+  RoundCornerAdd(rcs);
 }
 
 module Tile12(){ ////toplevel
@@ -301,6 +325,7 @@ module Tile12(){ ////toplevel
   c0 = [-sz[0], 0];
   c = Rectangle_corners(c0, sz);
   posts = Rectangle_corners2posts(c);
+  rcs = [c[2], c[3]];
   difference(){
     union(){
       TileBase(c[0], c[2]);
@@ -309,9 +334,9 @@ module Tile12(){ ////toplevel
       Posts(posts);
     }
     InterlockEdge(c[0], c[1], 1);
-    RoundCornerCut(c[2], c[3]);
+    RoundCornerCut(rcs);
   }
-  RoundCornerAdd(c[2], c[3]);
+  RoundCornerAdd(rcs);
 }
 
 module Demo(){ ////toplevel