// cutout
+cutout_l_end_y_front_slop = 0.5;
+cutout_l_end_y_rear_slop = 0.5;
+cutout_l_end_x_slop = 0.25;
+
+cutout_l_end_x = 22;
cutout_l_end_y = 85;
cutout_l_end_curve = 1;
+cutout_l_end_y_total = cutout_l_end_y
+ + cutout_l_end_y_front_slop + cutout_l_end_y_rear_slop;
+
+tile01_tr = [250, 0];
+
+cutout_tile01_y = 170 - 147 + cutout_l_end_y_front_slop;
+cutout_tile11_x = cutout_l_end_x + cutout_l_end_curve;
+cutout_tile11_y = cutout_l_end_y_total - cutout_tile01_y;
+
+// rear curve
+
+rearedge_len = 170;
-cutout_tile01_y = 170 - 147;
-cutout_tile11_x = 22 + cutout_l_end_curve;
-cutout_tile11_y = cutout_l_end_y - cutout_tile01_y;
+rearcurve_rad = 25.4;
+rearcurve_strt_len = 65;
+rearcurve_total_len = 84;
+
+rearcurve_rad_slop = 0.5;
// calculated
if (TEST) {
translate( concat(botleft + [thehd[0], 0], [0]) )
Commitid_BestCount([ size[0] - thehd[0]*2, thehd[1] ]);
- mirror([0,0,1]) {
- translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
- cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
- translate(concat(botleft_post, [-1]))
- cube(concat(topright_post-botleft_post, [tile_th+2]));
+ difference(){
+ mirror([0,0,1]) {
+ translate(concat(botleft + [test_edge,test_edge], [test_tile_th]))
+ cube(concat(size - [test_edge,test_edge]*2, [tile_th]));
+ translate(concat(botleft_post, [-1]))
+ cube(concat(topright_post-botleft_post, [tile_th+2]));
+ }
+ minkowski(){
+ Machine();
+ cube(max(test_edge, tile_hard_edge_hole_dist)*2, center=true);
+ }
}
}
}
TestPiece2();
}
-module Machine(){
+module Machine_Arm(){
+ ysz = cutout_l_end_y_total;
+ // assume the round end is arc of a circle
+ chordlen = dist2d([0,0], [ cutout_l_end_y, cutout_l_end_curve ]);
+ endrad = cutout_l_end_y / cutout_l_end_curve * chordlen;
+
+ translate([0,0,-30]) linear_extrude(height=60) {
+ translate(tile01_tr + [0, (-cutout_tile01_y + cutout_tile11_y)/2]) {
+ intersection(){
+ translate([-100, -ysz/2])
+ square([400, ysz]);
+ translate([ endrad - cutout_tile11_x - cutout_l_end_x_slop, 0 ])
+ circle(r=endrad, $fa=0.01,$fd=5);
+ }
+ }
+ }
+}
+
+module Machine_Rear(){
+ big_rad = rearcurve_total_len - rearcurve_strt_len + rearcurve_rad;
+ small_rad = rearcurve_rad + rearcurve_rad_slop;
+ translate([ 250 + rearedge_len - cutout_l_end_y + big_rad,
+ cutout_tile11_y,
+ 0 ]){
+ translate([ 0,
+ 0,
+ -rearcurve_rad
+ ]){
+ rotate([0,-90,0]){
+ cylinder(r = small_rad, h= rearcurve_strt_len);
+ }
+ }
+ translate([ 0,
+ 0,
+ big_rad - rearcurve_rad ]) {
+ intersection(){
+ rotate([90,0,0]){
+ rotate_extrude(convexity=10) {
+ translate([ big_rad,
+ 0 ])
+ circle(r= small_rad);
+ }
+ }
+ mirror([0,0,1])
+ cube([100,100,100]);
+ }
+ }
+ }
+}
+
+module Machine(){ ////toplevel
+ Machine_Arm();
+ Machine_Rear();
}
function Rectangle_corners(c0, sz) =
RoundCornerAdd(rcs);
}
+tile_01_11_cnr = [250, 0] + [-cutout_tile11_x, 0];
+tile_11_10_cnr = [250, 0] + [0, cutout_tile11_y];
+
module Tile11(){ ////toplevel
sz = [250,250];
c0 = [0,0];
RoundEdge(R_EDGE(c,2));
InterlockEdge(R_EDGE(c,3));
}
+ InterlockEdge(c[0], tile_01_11_cnr, 1);
+ InterlockEdge(tile_11_10_cnr, c[2], 1);
+ Machine();
+ }
+}
+
+tile_01_00_cnr = [250, 0] + [0, -cutout_tile01_y];
+
+module Tile01(){ ////toplevel
+ sz = [250,170];
+ c0 = [0,-sz[1]];
+ c = Rectangle_corners(c0, sz);
+ cnr_posts = Rectangle_corners2posts(c);
+ posts = concat(
+ Posts_interpolate_one(R_EDGE(cnr_posts,0)),
+ [ cnr_posts[2] + [0, -cutout_tile01_y] ],
+ Posts_interpolate_one(cnr_posts[2] - [cutout_tile11_x, 0],
+ cnr_posts[3])
+ );
+ difference(){
+ union(){
+ Rectangle_TileBase(c);
+ Posts(posts);
+ RoundEdge(R_EDGE(c,0));
+ InterlockEdge(tile_01_11_cnr, c[3]);
+ InterlockEdge(R_EDGE(c,3));
+ }
+ InterlockEdge(c[1], tile_01_00_cnr, 1);
Machine();
- InterlockEdge(R_EDGE(c,0), 1);
}
}
translate(demo_slop*[-2,1]) color("blue") Tile12();
translate(demo_slop*[-2,0]) color("red") Tile02();
translate(demo_slop*[-2,1]) color("orange") Tile11();
+ translate(demo_slop*[-2,0]) color("purple") Tile01();
+ %Machine();
}
//TestPiece1();