msgstr ""\r
"Project-Id-Version: Cura\n"\r
"Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-10-13 09:32+0200\n"\r
+"POT-Creation-Date: 2014-10-16 11:25+0200\n"\r
"PO-Revision-Date: 2014-07-28 13:47+0100\n"\r
"Last-Translator: \n"\r
"Language-Team: <LL@li.org>\n"\r
"Language: fr\n"\r
"X-Generator: Poedit 1.6.7\n"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "A new version of Cura is available, would you like to download?"\r
msgstr ""\r
"Une nouvelle version de Cura est disponible, voulez-vous la télécharger?"\r
\r
-#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:579\r
msgid "New version available"\r
msgstr "Nouvelle version disponible"\r
\r
msgid "Select your language:"\r
msgstr "Sélectionnez votre machine"\r
\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:280\r
#, fuzzy\r
msgid "Select which Printrbot machine you have:"\r
msgstr "Quel type de machine avez-vous:"\r
\r
+#: Cura/gui/configWizard.py:316\r
+#, fuzzy\r
+msgid "Other machine information"\r
+msgstr "Taille de la machine en mm"\r
+\r
#: Cura/gui/configWizard.py:317\r
msgid "The following pre-defined machine profiles are available"\r
msgstr "Les profils de machines prédéfinis suivants sont disponibles"\r
" ou si vous voulez un profil supplémentaire.\n"\r
"S'il vous plaît, signaler le à \"github issue tracker\"."\r
\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:348\r
msgid "Cura is now ready to be used!"\r
msgstr "Cura est maintenant prêt à être utilisé."\r
\r
+#: Cura/gui/configWizard.py:352\r
+#, fuzzy\r
+msgid "Custom RepRap information"\r
+msgstr "Soummettre des informations d'usages anonymes:"\r
+\r
#: Cura/gui/configWizard.py:353\r
msgid ""\r
"RepRap machines can be vastly different, so here you can set your own "\r
msgid "* Have other changes in the firmware"\r
msgstr "* Vous avez des changements particuliers dans le firmware"\r
\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:603\r
msgid ""\r
"It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
msgid "Show error log"\r
msgstr "Montrer le journal d'erreur"\r
\r
-#: Cura/gui/configWizard.py:649\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
msgid "Connecting to machine."\r
msgstr "Connexion à la machine."\r
\r
msgid "Communication State: %s"\r
msgstr "Etat de la communication: %s"\r
\r
-#: Cura/gui/configWizard.py:722\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
msgid "Failed to establish connection with the printer."\r
msgstr "Impossible d'établir la communication avec l'imprimante."\r
\r
msgid "Please press the bottom Z endstop."\r
msgstr "Veuillez appuyer sur la butée Z du bas."\r
\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
+msgstr ""\r
+\r
#: Cura/gui/configWizard.py:860\r
msgid "Calibrating the Steps Per E requires some manual actions."\r
msgstr "La calibration du nombre de pas par E requiert une action manuelle."\r
"Erreur: de se connecter à la machine\n"\r
"Si ce problème persiste, essayer de reconnecter le cable USB"\r
\r
-#: Cura/gui/firmwareInstall.py:58\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr "Cura est maintenant prêt à être utilisé."\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+#, fuzzy\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr "Cura est maintenant prêt à être utilisé."\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+#, fuzzy\r
+msgid "Bed leveling wizard"\r
+msgstr "Assistant de mise a niveau du plateau..."\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+#, fuzzy\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr "Cet assistant va vous aider avec les étapes suivantes:"\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+#, fuzzy\r
+msgid "It will do the following steps"\r
+msgstr "Le calcul fournit la valeur de pas par E suivante:"\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid " and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+#, fuzzy\r
+msgid "Connect to printer"\r
+msgstr "Connexion à la machine."\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr "Reprendre"\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+#, fuzzy\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr "Cet assistant va vous aider avec les étapes suivantes:"\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+#, fuzzy\r
+msgid "Head offset wizard"\r
+msgstr "Assistant de décalage des têtes..."\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+#, fuzzy\r
+msgid "Expert config"\r
+msgstr "Expert"\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
msgid ""\r
"I am sorry, but Cura does not ship with a default firmware for your machine "\r
"configuration."\r
"Désolé, mais Cura n'est pas livré avec un firmware par défault dédié à votre "\r
"machine."\r
\r
-#: Cura/gui/firmwareInstall.py:58 Cura/gui/firmwareInstall.py:62\r
-#: Cura/gui/firmwareInstall.py:117 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:510\r
msgid "Firmware update"\r
msgstr "Mise à jour du firmware"\r
\r
-#: Cura/gui/firmwareInstall.py:62\r
+#: Cura/gui/firmwareInstall.py:64\r
msgid ""\r
"Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
"So updating your RepRap with Cura might or might not work."\r
"ATmega2560.\n"\r
"Donc, mettre à jour votre RepRap avec Cura fonctionnera pas."\r
\r
-#: Cura/gui/firmwareInstall.py:70\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
msgid "OK"\r
msgstr "OK"\r
\r
-#: Cura/gui/firmwareInstall.py:91\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
msgid "Reading firmware..."\r
msgstr "Lecture du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:93\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
msgid "Connecting to machine..."\r
msgstr "Connexion à la machine..."\r
\r
-#: Cura/gui/firmwareInstall.py:97\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
msgid ""\r
"Please connect the printer to\n"\r
"your computer with the USB cable."\r
"Veuillez connecter l'imprimante à \n"\r
"votre ordinateur avec le câble USB."\r
\r
-#: Cura/gui/firmwareInstall.py:116\r
+#: Cura/gui/firmwareInstall.py:118\r
msgid ""\r
"Failed to find machine for firmware upgrade\n"\r
"Is your machine connected to the PC?"\r
"Aucune machine trouvée pour ce firmware\n"\r
"Est-elle connectée à votre PC? "\r
\r
-#: Cura/gui/firmwareInstall.py:121\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
msgid "Uploading firmware..."\r
msgstr "Téléchargement du firmware..."\r
\r
-#: Cura/gui/firmwareInstall.py:124\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
#, python-format\r
msgid ""\r
"Done!\n"\r
"Teminé!\n"\r
"Firmware installé: %s"\r
\r
-#: Cura/gui/firmwareInstall.py:126\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
msgid "Failed to write firmware.\n"\r
msgstr "Echec d'écriture du firmware.\n"\r
\r
+#: Cura/gui/firmwareInstall.py:231\r
+#, fuzzy\r
+msgid "Failed to connect to programmer.\n"\r
+msgstr "Impossible de se connecter à YouMagine.com"\r
+\r
#: Cura/gui/mainWindow.py:66\r
msgid "Load model file...\tCTRL+L"\r
msgstr "Ouvrir un modèle...\tCTRL+L"\r
msgid "Preferences...\tCTRL+,"\r
msgstr "Préférences...\tCTRL+,"\r
\r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:436\r
msgid "Machine settings..."\r
msgstr "Réglages machine..."\r
\r
msgid "PID Debugger..."\r
msgstr "Déboguer le PID..."\r
\r
-#: Cura/gui/mainWindow.py:137\r
+#: Cura/gui/mainWindow.py:136\r
+#, fuzzy\r
+msgid "Auto Firmware Update..."\r
+msgstr "Mise à jour du firmware"\r
+\r
+#: Cura/gui/mainWindow.py:139\r
msgid "Copy profile to clipboard"\r
msgstr "Copier le profil dans le bloc-note"\r
\r
-#: Cura/gui/mainWindow.py:141\r
+#: Cura/gui/mainWindow.py:143\r
msgid "Print all at once"\r
msgstr "Imprimer tous les objets à la fois"\r
\r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:145\r
msgid "Print one at a time"\r
msgstr "Imprimer une objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:152\r
msgid "Tools"\r
msgstr "Outils"\r
\r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:158 Cura/util/profile.py:175\r
msgid "Machine"\r
msgstr "Machine"\r
\r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:161\r
msgid "Switch to quickprint..."\r
msgstr "Basculer en mode simple..."\r
\r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:165\r
msgid "Switch to full settings..."\r
msgstr "Basculer en mode complet..."\r
\r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:170\r
msgid "Open expert settings...\tCTRL+E"\r
msgstr "Configuration experte..."\r
\r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:174\r
msgid "Run first run wizard..."\r
msgstr "Assistant de première utilisation..."\r
\r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:176\r
msgid "Run bed leveling wizard..."\r
msgstr "Assistant de mise a niveau du plateau..."\r
\r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:178\r
msgid "Run head offset wizard..."\r
msgstr "Assistant de décalage des têtes..."\r
\r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:181\r
msgid "Expert"\r
msgstr "Expert"\r
\r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:184\r
msgid "Online documentation..."\r
msgstr "Documentation en ligne..."\r
\r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:186\r
msgid "Report a problem..."\r
msgstr "Signaler un problème..."\r
\r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:188\r
msgid "Check for update..."\r
msgstr "Vérification des mises à jour..."\r
\r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:190\r
msgid "Open YouMagine website..."\r
msgstr "Ouvrir le site YouMagine..."\r
\r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:192\r
msgid "About Cura..."\r
msgstr "A propos de Cura..."\r
\r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:194\r
msgid "Help"\r
msgstr "Aide"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid ""\r
"For \"One at a time\" printing, you need to have entered the correct head "\r
"size and gantry height in the machine settings"\r
"Pour l'impression \"Une à la fois \", vous devez avoir entré la taille de la "\r
"tête d'impression dans les paramètres de la machine"\r
\r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:345\r
msgid "One at a time warning"\r
msgstr "Avertissement un objet à la fois"\r
\r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:442\r
msgid "Install default firmware..."\r
msgstr "Installer le firmware Marlin par défaut"\r
\r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:445\r
msgid "Install custom firmware..."\r
msgstr "Installer un firmware maison"\r
\r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:449\r
msgid "Select profile file to load"\r
msgstr "Sélection du profil à charger"\r
\r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:461\r
msgid "Select gcode file to load profile from"\r
msgstr "Sélection du fichier GCode à utiliser"\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid ""\r
"No profile found in GCode file.\n"\r
"This feature only works with GCode files made by Cura 12.07 or newer."\r
"Pas de profil trouvé dans le fichier GCode.\n"\r
"Cette option ne marche qu'avec les fichiers crées à partir de Cura 12.07. "\r
\r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:476\r
msgid "Profile load error"\r
msgstr "Erreur de chargement du profil"\r
\r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:480\r
msgid "Select profile file to save"\r
msgstr "Sélection d'un profil à sauvegarder"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid ""\r
"This will reset all profile settings to defaults.\n"\r
"Unless you have saved your current profile, all settings will be lost!\n"\r
"A moins de l'avoir sauvegardé, tous les réglages actuels seront perdus!\n"\r
"Voulez-vous vraiment les réinitialiser?"\r
\r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:490\r
msgid "Profile reset"\r
msgstr "Réinitialisation du profile"\r
\r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:510\r
msgid ""\r
"Warning: Installing a custom firmware does not guarantee that you machine "\r
"will function correctly, and could damage your machine."\r
"Attention: installer un firmware maison ne garantit pas le bon "\r
"fonctionnement de votre machine et pourrait même l'endommager."\r
\r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:511 Cura/gui/mainWindow.py:553\r
msgid "Open firmware to upload"\r
msgstr "Sélection du firmware à mettre à jour"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "You are running the latest version of Cura!"\r
msgstr "Vous avez la dernière version de Cura!"\r
\r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:582\r
msgid "Awesome!"\r
msgstr "Excellent!"\r
\r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:627\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:631\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:637\r
msgid "Plugins"\r
msgstr "Extensions"\r
\r
msgid "Error: no plugin selected"\r
msgstr "Erreur: aucune extension sélectionnée"\r
\r
+#: Cura/gui/preferencesDialog.py:14\r
+#, fuzzy\r
+msgid "Preferences"\r
+msgstr "Préférences...\tCTRL+,"\r
+\r
#: Cura/gui/preferencesDialog.py:28\r
msgid "Print window"\r
msgstr "Fenêtre d'impression"\r
msgid "Cura settings"\r
msgstr "Réglages de Cura"\r
\r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
msgid "Machine settings"\r
msgstr "Réglages de la machine"\r
\r
msgid "Communication settings"\r
msgstr "Réglages de la communication"\r
\r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+#, fuzzy\r
+msgid "Add new machine"\r
+msgstr "Ajouter une nouvelle machine..."\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+#, fuzzy\r
+msgid "Remove machine"\r
+msgstr "Sélectionnez votre machine"\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+#, fuzzy\r
+msgid "Change machine name"\r
+msgstr "Nom de la machine"\r
+\r
#: Cura/gui/preferencesDialog.py:154\r
msgid "Cannot remove the last machine configuration in Cura"\r
msgstr "La dernière configuration de machine ne peut pas être retirée"\r
msgid "Enter the new name:"\r
msgstr ""\r
\r
-#: Cura/gui/preferencesDialog.py:168\r
-#, fuzzy\r
-msgid "Change machine name"\r
-msgstr "Nom de la machine"\r
-\r
#: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
#, python-format\r
msgid "Printing on %s"\r
"Une première couche plus épaisses que %.2fmm (3/4 du diamètre de la buse) "\r
"donne généralement de mauvais résultats et n'est pas recommandée."\r
\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r
+\r
#~ msgid "* Configure Cura for your machine"\r
#~ msgstr "* Configurer Cura pour votre machine"\r
\r
#~ msgid "* Optionally level your printer bed"\r
#~ msgstr "* Optionnellement mettre votre lit à niveau "\r
\r
-#~ msgid "Add new machine..."\r
-#~ msgstr "Ajouter une nouvelle machine..."\r
-\r
#~ msgid "Statistics"\r
#~ msgstr "Statistiques"\r
\r
#~ msgid "Camera"\r
#~ msgstr "Caméra"\r
\r
-#~ msgid "Resume"\r
-#~ msgstr "Reprendre"\r
-\r
#~ msgid "Loading gcode...\n"\r
#~ msgstr "Chargement du GCode...\n"\r
\r
~ianmdlvl / cura.git / blobdiff