Update Korean Translation for Cura 14.09

[cura.git] / resources / locale / en / LC_MESSAGES / Cura.po

diff --git a/resources/locale/en/LC_MESSAGES/Cura.po b/resources/locale/en/LC_MESSAGES/Cura.po
index e78b41756249277121764e1a0d206c5fb810cc20..3584f32468cb0d3ec0384e00727cce4cad086db8 100644 (file)
--- a/resources/locale/en/LC_MESSAGES/Cura.po
+++ b/resources/locale/en/LC_MESSAGES/Cura.po
@@ -7,7 +7,7 @@ msgid ""
 msgstr ""\r
 "Project-Id-Version: Cura\n"\r
 "Report-Msgid-Bugs-To: \n"\r
-"POT-Creation-Date: 2014-07-28 17:57+0200\n"\r
+"POT-Creation-Date: 2014-10-22 10:17+0200\n"\r
 "PO-Revision-Date: 2013-09-27 09:41+0100\n"\r
 "Last-Translator: \n"\r
 "Language-Team: LANGUAGE <LL@li.org>\n"\r
@@ -16,39 +16,51 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"\r
 "X-Generator: Poedit 1.5.7\n"\r
 \r
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
 msgid "A new version of Cura is available, would you like to download?"\r
 msgstr ""\r
 \r
-#: Cura/gui/app.py:144 Cura/gui/mainWindow.py:566\r
+#: Cura/gui/app.py:140 Cura/gui/mainWindow.py:610\r
 msgid "New version available"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:223\r
+#: Cura/gui/configWizard.py:231\r
 msgid "Add new machine wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:225\r
+#: Cura/gui/configWizard.py:233\r
 msgid "First time run wizard"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:226\r
+#: Cura/gui/configWizard.py:234\r
 msgid "Welcome, and thanks for trying Cura!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:228\r
+#: Cura/gui/configWizard.py:236\r
 msgid "This wizard will help you in setting up Cura for your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:262\r
+#: Cura/gui/configWizard.py:239\r
+msgid "Select your language:"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:279\r
+msgid "Printrbot Selection"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:280\r
 msgid "Select which Printrbot machine you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:299\r
+#: Cura/gui/configWizard.py:316\r
+msgid "Other machine information"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:317\r
 msgid "The following pre-defined machine profiles are available"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:300\r
+#: Cura/gui/configWizard.py:318\r
 msgid ""\r
 "Note that these profiles are not guaranteed to give good results,\n"\r
 "or work at all. Extra tweaks might be required.\n"\r
@@ -57,611 +69,877 @@ msgid ""
 "Please report it at the github issue tracker."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:330\r
+#: Cura/gui/configWizard.py:329\r
+msgid "Custom..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:347\r
+msgid "Cura Ready!"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:348\r
 msgid "Cura is now ready to be used!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:335\r
+#: Cura/gui/configWizard.py:352\r
+msgid "Custom RepRap information"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:353\r
 msgid ""\r
 "RepRap machines can be vastly different, so here you can set your own "\r
 "settings."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:336\r
+#: Cura/gui/configWizard.py:354\r
 msgid ""\r
 "Be sure to review the default profile before running it on your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:337\r
+#: Cura/gui/configWizard.py:355\r
 msgid ""\r
 "If you like a default profile for your machine added,\n"\r
 "then make an issue on github."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:339\r
+#: Cura/gui/configWizard.py:357\r
 msgid "You will have to manually install Marlin or Sprinter firmware."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:341\r
+#: Cura/gui/configWizard.py:359\r
 msgid "Machine name"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:342\r
+#: Cura/gui/configWizard.py:360\r
 msgid "Machine width (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:343\r
+#: Cura/gui/configWizard.py:361\r
 msgid "Machine depth (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:344\r
+#: Cura/gui/configWizard.py:362\r
 msgid "Machine height (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:345 Cura/util/profile.py:175\r
+#: Cura/gui/configWizard.py:363 Cura/util/profile.py:175\r
 msgid "Nozzle size (mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:346 Cura/util/profile.py:503\r
+#: Cura/gui/configWizard.py:364 Cura/util/profile.py:503\r
 msgid "Heated bed"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:347\r
+#: Cura/gui/configWizard.py:365\r
 msgid "Bed center is 0,0,0 (RoStock)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:367\r
+#: Cura/gui/configWizard.py:385\r
 msgid "Select your machine"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:368\r
+#: Cura/gui/configWizard.py:386\r
 msgid "What kind of machine do you have:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:377\r
-msgid "Other (Ex: RepRap, MakerBot)"\r
+#: Cura/gui/configWizard.py:401\r
+msgid "Other (Ex: RepRap, MakerBot, Witbox)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:380\r
+#: Cura/gui/configWizard.py:404\r
 msgid ""\r
 "The collection of anonymous usage information helps with the continued "\r
 "improvement of Cura."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:381\r
+#: Cura/gui/configWizard.py:405\r
 msgid ""\r
 "This does NOT submit your models online nor gathers any privacy related "\r
 "information."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:382\r
+#: Cura/gui/configWizard.py:406\r
 msgid "Submit anonymous usage information:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:383\r
+#: Cura/gui/configWizard.py:407\r
 msgid "For full details see: http://wiki.ultimaker.com/Cura:stats"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:455\r
+#: Cura/gui/configWizard.py:524\r
 msgid "Select upgraded parts you have"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:456\r
+#: Cura/gui/configWizard.py:525\r
 msgid ""\r
 "To assist you in having better default settings for your Ultimaker\n"\r
 "Cura would like to know which upgrades you have in your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:458\r
+#: Cura/gui/configWizard.py:527\r
 msgid "Extruder drive upgrade"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:459\r
+#: Cura/gui/configWizard.py:528\r
 msgid "Heated printer bed (kit)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:460\r
+#: Cura/gui/configWizard.py:529\r
 msgid "Heated printer bed (self built)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:461\r
+#: Cura/gui/configWizard.py:530\r
 msgid "Dual extrusion (experimental)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:463\r
+#: Cura/gui/configWizard.py:532\r
 msgid ""\r
 "If you have an Ultimaker bought after october 2012 you will have the\n"\r
 "Extruder drive upgrade. If you do not have this upgrade,\n"\r
 "it is highly recommended to improve reliability."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:464\r
+#: Cura/gui/configWizard.py:533\r
 msgid ""\r
 "This upgrade can be bought from the Ultimaker webshop\n"\r
 "or found on thingiverse as thing:26094"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:486\r
+#: Cura/gui/configWizard.py:555\r
 msgid "Upgrade Ultimaker Firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:487\r
+#: Cura/gui/configWizard.py:556\r
 msgid ""\r
 "Firmware is the piece of software running directly on your 3D printer.\n"\r
 "This firmware controls the step motors, regulates the temperature\n"\r
 "and ultimately makes your printer work."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:489\r
+#: Cura/gui/configWizard.py:558\r
 msgid ""\r
 "The firmware shipping with new Ultimakers works, but upgrades\n"\r
 "have been made to make better prints, and make calibration easier."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:491\r
+#: Cura/gui/configWizard.py:560\r
 msgid ""\r
 "Cura requires these new features and thus\n"\r
 "your firmware will most likely need to be upgraded.\n"\r
 "You will get the chance to do so now."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:496\r
+#: Cura/gui/configWizard.py:566\r
 msgid "Do not upgrade to this firmware if:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:497\r
+#: Cura/gui/configWizard.py:567\r
 msgid "* You have an older machine based on ATMega1280 (Rev 1 machine)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:498\r
+#: Cura/gui/configWizard.py:568\r
+msgid "* Build your own heated bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:569\r
 msgid "* Have other changes in the firmware"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:532\r
+#: Cura/gui/configWizard.py:589\r
+msgid "Ultimaker Checkup"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:603\r
 msgid ""\r
 "It is a good idea to do a few sanity checks now on your Ultimaker.\n"\r
 "You can skip these if you know your machine is functional."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:604\r
 msgid "Run checks"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:533\r
+#: Cura/gui/configWizard.py:604\r
 msgid "Skip checks"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:537\r
+#: Cura/gui/configWizard.py:608\r
 msgid "Communication:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:538\r
+#: Cura/gui/configWizard.py:609\r
 msgid "Temperature:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:539\r
+#: Cura/gui/configWizard.py:610\r
 msgid "Endstops:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:544\r
+#: Cura/gui/configWizard.py:615\r
 msgid "Show error log"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:578\r
+#: Cura/gui/configWizard.py:649 Cura/gui/configWizard.py:1078\r
+#: Cura/gui/configWizard.py:1297\r
 msgid "Connecting to machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:599\r
+#: Cura/gui/configWizard.py:670\r
 msgid "Cooldown before temperature check."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:605 Cura/gui/configWizard.py:612\r
+#: Cura/gui/configWizard.py:676 Cura/gui/configWizard.py:683\r
 msgid "Checking the heater and temperature sensor."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:623\r
+#: Cura/gui/configWizard.py:694\r
 msgid "Please make sure none of the endstops are pressed."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:636\r
+#: Cura/gui/configWizard.py:707\r
 msgid "Temperature measurement FAILED!"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:641\r
+#: Cura/gui/configWizard.py:712\r
 #, python-format\r
 msgid "Head temperature: %d"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:648 Cura/gui/configWizard.py:657\r
+#: Cura/gui/configWizard.py:719 Cura/gui/configWizard.py:728\r
 #, python-format\r
 msgid "Communication State: %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:651\r
+#: Cura/gui/configWizard.py:722 Cura/gui/configWizard.py:1255\r
+#: Cura/gui/configWizard.py:1473\r
 msgid "Failed to establish connection with the printer."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:696\r
-msgid "Please press the right X endstop."\r
+#: Cura/gui/configWizard.py:768 Cura/gui/configWizard.py:777\r
+msgid "Please press the left X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:701\r
-msgid "Please press the left X endstop."\r
+#: Cura/gui/configWizard.py:772\r
+msgid "Please press the right X endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:706\r
+#: Cura/gui/configWizard.py:782\r
 msgid "Please press the front Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:711\r
+#: Cura/gui/configWizard.py:788 Cura/gui/configWizard.py:797\r
+msgid "Please press the top Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:792\r
 msgid "Please press the back Y endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:716\r
-msgid "Please press the top Z endstop."\r
+#: Cura/gui/configWizard.py:804 Cura/gui/configWizard.py:817\r
+msgid "Checkup finished"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:721\r
+#: Cura/gui/configWizard.py:811\r
 msgid "Please press the bottom Z endstop."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:727\r
-msgid "Checkup finished"\r
+#: Cura/gui/configWizard.py:832 Cura/gui/configWizard.py:855\r
+msgid "Ultimaker Calibration"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:770\r
+#: Cura/gui/configWizard.py:860\r
 msgid "Calibrating the Steps Per E requires some manual actions."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:771\r
+#: Cura/gui/configWizard.py:861\r
 msgid "First remove any filament from your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:772\r
+#: Cura/gui/configWizard.py:862\r
 msgid ""\r
 "Next put in your filament so the tip is aligned with the\n"\r
 "top of the extruder drive."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:773\r
+#: Cura/gui/configWizard.py:863\r
 msgid "We'll push the filament 100mm"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:774\r
+#: Cura/gui/configWizard.py:864\r
 msgid "Extrude 100mm filament"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:775\r
+#: Cura/gui/configWizard.py:865\r
 msgid ""\r
 "Now measure the amount of extruded filament:\n"\r
 "(this can be more or less then 100mm)"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:776\r
+#: Cura/gui/configWizard.py:866\r
 msgid "Save"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:777\r
+#: Cura/gui/configWizard.py:867\r
 msgid "This results in the following steps per E:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:779\r
+#: Cura/gui/configWizard.py:869\r
 msgid "You can repeat these steps to get better calibration."\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:782\r
+#: Cura/gui/configWizard.py:872\r
 msgid ""\r
 "If you still have filament in your printer which needs\n"\r
 "heat to remove, press the heat up button below:"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:783\r
+#: Cura/gui/configWizard.py:873\r
 msgid "Heatup for filament removal"\r
 msgstr ""\r
 \r
-#: Cura/gui/configWizard.py:808 Cura/gui/configWizard.py:842\r
+#: Cura/gui/configWizard.py:898 Cura/gui/configWizard.py:932\r
 msgid ""\r
 "Error: Failed to open serial port to machine\n"\r
 "If this keeps happening, try disconnecting and reconnecting the USB cable"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:44\r
+#: Cura/gui/configWizard.py:972\r
+msgid "Ultimaker2"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:973\r
+msgid "Congratulations on your the purchase of your brand new Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:974\r
+msgid "Cura is now ready to be used with your Ultimaker2."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:979\r
+msgid "Lulzbot TAZ/Mini"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:980\r
+msgid "Cura is now ready to be used with your Lulzbot."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:985\r
+msgid "Configuration Wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1038 Cura/gui/configWizard.py:1486\r
+msgid "Bed leveling wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1040\r
+msgid "This wizard will help you in leveling your printer bed"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1042\r
+msgid "It will do the following steps"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1043\r
+msgid "* Move the printer head to each corner"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1044\r
+msgid "  and let you adjust the height of the bed to the nozzle"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1045\r
+msgid "* Print a line around the bed to check if it is level"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1048 Cura/gui/configWizard.py:1273\r
+msgid "Connect to printer"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1052 Cura/gui/configWizard.py:1279\r
+msgid "Resume"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Up 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1053\r
+msgid "Down 0.2mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Up 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1054\r
+msgid "Down 10mm"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1114\r
+msgid "Homing printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1124\r
+msgid "Moving head to back center..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1131\r
+msgid "Moving head to back left corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1139 Cura/gui/configWizard.py:1153\r
+msgid "Moving head to front right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1146\r
+msgid "Moving head to back right corner..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1160\r
+msgid "Heating up printer..."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1167\r
+msgid "Printing a square on the printer bed at 0.3mm height."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1207\r
+msgid ""\r
+"Adjust the front left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1212\r
+msgid ""\r
+"Adjust the back screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1214\r
+msgid ""\r
+"Adjust the back left screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1218\r
+msgid ""\r
+"Adjust the back right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1222\r
+msgid ""\r
+"Adjust the front right screw of your printer bed\n"\r
+"So the nozzle just hits the bed."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1226\r
+#, python-format\r
+msgid "Heating up printer: %d/%d"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1228\r
+msgid ""\r
+"The printer is hot now. Please insert some PLA filament into the printer."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1237\r
+msgid "Use the up/down buttons to move the bed and adjust your Z endstop."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1249\r
+msgid ""\r
+"Calibration finished.\n"\r
+"The squares on the bed should slightly touch each other."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1270\r
+msgid ""\r
+"This wizard will help you in calibrating the printer head offsets of your "\r
+"dual extrusion machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1303\r
+msgid "Printing initial calibration cross"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1351\r
+msgid ""\r
+"Please measure the distance between the horizontal lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1361\r
+msgid "Printing the fine calibration lines."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1416\r
+msgid ""\r
+"Which horizontal line number lays perfect on top of each other? Front most "\r
+"line is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1427\r
+#, python-format\r
+msgid "Calibration finished. Offsets are: %s %s"\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1440\r
+msgid "Please load both extruders with PLA."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1449\r
+msgid "Homing printer and heating up both extruders."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1459\r
+msgid "Please measure the distance between the vertical lines in millimeters."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1466\r
+msgid ""\r
+"Which vertical line number lays perfect on top of each other? Leftmost line "\r
+"is zero."\r
+msgstr ""\r
+\r
+#: Cura/gui/configWizard.py:1515\r
+msgid "Head offset wizard"\r
+msgstr ""\r
+\r
+#: Cura/gui/expertConfig.py:25\r
+msgid "Expert config"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:59\r
 msgid ""\r
 "I am sorry, but Cura does not ship with a default firmware for your machine "\r
 "configuration."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:44 Cura/gui/firmwareInstall.py:48\r
-#: Cura/gui/firmwareInstall.py:103 Cura/gui/mainWindow.py:508\r
+#: Cura/gui/firmwareInstall.py:59 Cura/gui/firmwareInstall.py:64\r
+#: Cura/gui/firmwareInstall.py:119 Cura/gui/mainWindow.py:541\r
 msgid "Firmware update"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:48\r
+#: Cura/gui/firmwareInstall.py:64\r
 msgid ""\r
 "Cura only supports firmware updates for ATMega2560 based hardware.\n"\r
 "So updating your RepRap with Cura might or might not work."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:56\r
+#: Cura/gui/firmwareInstall.py:72 Cura/gui/firmwareInstall.py:175\r
 msgid "OK"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:77\r
+#: Cura/gui/firmwareInstall.py:93 Cura/gui/firmwareInstall.py:206\r
 msgid "Reading firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:79\r
+#: Cura/gui/firmwareInstall.py:95 Cura/gui/firmwareInstall.py:208\r
 msgid "Connecting to machine..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:83\r
+#: Cura/gui/firmwareInstall.py:99 Cura/gui/firmwareInstall.py:212\r
 msgid ""\r
 "Please connect the printer to\n"\r
 "your computer with the USB cable."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:102\r
+#: Cura/gui/firmwareInstall.py:118\r
 msgid ""\r
 "Failed to find machine for firmware upgrade\n"\r
 "Is your machine connected to the PC?"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:107\r
+#: Cura/gui/firmwareInstall.py:125\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UMO firmware on an UM2 or UMO+?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:131\r
+msgid ""\r
+"Failed to install firmware:\n"\r
+"This firmware is not compatible with this machine.\n"\r
+"Trying to install UM2 or UMO+ firmware on an UMO?"\r
+msgstr ""\r
+\r
+#: Cura/gui/firmwareInstall.py:136 Cura/gui/firmwareInstall.py:234\r
 msgid "Uploading firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:110\r
+#: Cura/gui/firmwareInstall.py:139 Cura/gui/firmwareInstall.py:237\r
 #, python-format\r
 msgid ""\r
 "Done!\n"\r
 "Installed firmware: %s"\r
 msgstr ""\r
 \r
-#: Cura/gui/firmwareInstall.py:112\r
+#: Cura/gui/firmwareInstall.py:141 Cura/gui/firmwareInstall.py:239\r
 msgid "Failed to write firmware.\n"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:66\r
-msgid "Load model file...\tCTRL+L"\r
+#: Cura/gui/firmwareInstall.py:231\r
+msgid "Failed to connect to programmer.\n"\r
 msgstr ""\r
 \r
 #: Cura/gui/mainWindow.py:68\r
-msgid "Save model...\tCTRL+S"\r
+msgid "Load model file...\tCTRL+L"\r
 msgstr ""\r
 \r
 #: Cura/gui/mainWindow.py:70\r
-msgid "Reload platform\tF5"\r
+msgid "Save model...\tCTRL+S"\r
 msgstr ""\r
 \r
 #: Cura/gui/mainWindow.py:72\r
+msgid "Reload platform\tF5"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:74\r
 msgid "Clear platform"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:76\r
+#: Cura/gui/mainWindow.py:78\r
 msgid "Print...\tCTRL+P"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:78 Cura/gui/sceneView.py:279\r
+#: Cura/gui/mainWindow.py:80 Cura/gui/sceneView.py:279\r
 msgid "Save GCode..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:80\r
+#: Cura/gui/mainWindow.py:82\r
 msgid "Show slice engine log..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:84\r
+#: Cura/gui/mainWindow.py:86\r
 msgid "Open Profile..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:87\r
+#: Cura/gui/mainWindow.py:89\r
 msgid "Save Profile..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:90\r
+#: Cura/gui/mainWindow.py:92\r
 msgid "Load Profile from GCode..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:94\r
+#: Cura/gui/mainWindow.py:96\r
 msgid "Reset Profile to default"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:99\r
+#: Cura/gui/mainWindow.py:101\r
 msgid "Preferences...\tCTRL+,"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:101 Cura/gui/mainWindow.py:434\r
+#: Cura/gui/mainWindow.py:103 Cura/gui/mainWindow.py:467\r
 msgid "Machine settings..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:107\r
+#: Cura/gui/mainWindow.py:109\r
 msgid "Recent Model Files"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:114\r
+#: Cura/gui/mainWindow.py:116\r
 msgid "Recent Profile Files"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:120\r
+#: Cura/gui/mainWindow.py:122\r
 msgid "Quit"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:122\r
+#: Cura/gui/mainWindow.py:124\r
 msgid "File"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:130\r
+#: Cura/gui/mainWindow.py:132\r
 msgid "Minecraft map import..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:134\r
+#: Cura/gui/mainWindow.py:136\r
 msgid "PID Debugger..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:137\r
-msgid "Copy profile to clipboard"\r
+#: Cura/gui/mainWindow.py:138\r
+msgid "Auto Firmware Update..."\r
 msgstr ""\r
 \r
 #: Cura/gui/mainWindow.py:141\r
+msgid "Copy profile to clipboard"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:145\r
 msgid "Print all at once"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:143\r
+#: Cura/gui/mainWindow.py:147\r
 msgid "Print one at a time"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:150\r
+#: Cura/gui/mainWindow.py:154\r
 msgid "Tools"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:156 Cura/util/profile.py:175\r
+#: Cura/gui/mainWindow.py:160 Cura/util/profile.py:175\r
 msgid "Machine"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:159\r
+#: Cura/gui/mainWindow.py:163\r
 msgid "Switch to quickprint..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:163\r
+#: Cura/gui/mainWindow.py:167\r
 msgid "Switch to full settings..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:168\r
+#: Cura/gui/mainWindow.py:172\r
 msgid "Open expert settings...\tCTRL+E"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:172\r
+#: Cura/gui/mainWindow.py:176\r
 msgid "Run first run wizard..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:174\r
+#: Cura/gui/mainWindow.py:178\r
 msgid "Run bed leveling wizard..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:176\r
+#: Cura/gui/mainWindow.py:180\r
 msgid "Run head offset wizard..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:179\r
+#: Cura/gui/mainWindow.py:183\r
 msgid "Expert"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:182\r
+#: Cura/gui/mainWindow.py:186\r
 msgid "Online documentation..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:184\r
+#: Cura/gui/mainWindow.py:188\r
 msgid "Report a problem..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:186\r
+#: Cura/gui/mainWindow.py:190\r
 msgid "Check for update..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:188\r
+#: Cura/gui/mainWindow.py:192\r
 msgid "Open YouMagine website..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:190\r
+#: Cura/gui/mainWindow.py:194\r
 msgid "About Cura..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:192\r
+#: Cura/gui/mainWindow.py:196\r
 msgid "Help"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:376\r
 msgid ""\r
 "For \"One at a time\" printing, you need to have entered the correct head "\r
 "size and gantry height in the machine settings"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:343\r
+#: Cura/gui/mainWindow.py:376\r
 msgid "One at a time warning"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:440\r
+#: Cura/gui/mainWindow.py:473\r
 msgid "Install default firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:443\r
+#: Cura/gui/mainWindow.py:476\r
 msgid "Install custom firmware..."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:447\r
+#: Cura/gui/mainWindow.py:480\r
 msgid "Select profile file to load"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:459\r
+#: Cura/gui/mainWindow.py:492\r
 msgid "Select gcode file to load profile from"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:507\r
 msgid ""\r
 "No profile found in GCode file.\n"\r
 "This feature only works with GCode files made by Cura 12.07 or newer."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:474\r
+#: Cura/gui/mainWindow.py:507\r
 msgid "Profile load error"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:478\r
+#: Cura/gui/mainWindow.py:511\r
 msgid "Select profile file to save"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:521\r
 msgid ""\r
 "This will reset all profile settings to defaults.\n"\r
 "Unless you have saved your current profile, all settings will be lost!\n"\r
 "Do you really want to reset?"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:488\r
+#: Cura/gui/mainWindow.py:521\r
 msgid "Profile reset"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:508\r
+#: Cura/gui/mainWindow.py:541\r
 msgid ""\r
 "Warning: Installing a custom firmware does not guarantee that you machine "\r
 "will function correctly, and could damage your machine."\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:509\r
+#: Cura/gui/mainWindow.py:542 Cura/gui/mainWindow.py:584\r
 msgid "Open firmware to upload"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:613\r
 msgid "You are running the latest version of Cura!"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:569\r
+#: Cura/gui/mainWindow.py:613\r
 msgid "Awesome!"\r
 msgstr ""\r
 \r
-#: Cura/gui/mainWindow.py:624\r
+#: Cura/gui/mainWindow.py:658\r
+msgid "Basic"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:662\r
+msgid "Advanced"\r
+msgstr ""\r
+\r
+#: Cura/gui/mainWindow.py:668\r
 msgid "Plugins"\r
 msgstr ""\r
 \r
-#: Cura/gui/pluginPanel.py:27\r
+#: Cura/gui/pluginPanel.py:31\r
 msgid "Plugins:"\r
 msgstr ""\r
 \r
-#: Cura/gui/pluginPanel.py:31\r
+#: Cura/gui/pluginPanel.py:35\r
 msgid "Open plugin location"\r
 msgstr ""\r
 \r
-#: Cura/gui/pluginPanel.py:32\r
+#: Cura/gui/pluginPanel.py:36\r
 msgid "Enabled plugins"\r
 msgstr ""\r
 \r
-#: Cura/gui/pluginPanel.py:134\r
+#: Cura/gui/pluginPanel.py:159\r
 msgid "You need to select a plugin before you can add anything."\r
 msgstr ""\r
 \r
-#: Cura/gui/pluginPanel.py:134\r
+#: Cura/gui/pluginPanel.py:159\r
 msgid "Error: no plugin selected"\r
 msgstr ""\r
 \r
+#: Cura/gui/preferencesDialog.py:14\r
+msgid "Preferences"\r
+msgstr ""\r
+\r
 #: Cura/gui/preferencesDialog.py:28\r
 msgid "Print window"\r
 msgstr ""\r
@@ -682,7 +960,7 @@ msgstr ""
 msgid "Cura settings"\r
 msgstr ""\r
 \r
-#: Cura/gui/preferencesDialog.py:84\r
+#: Cura/gui/preferencesDialog.py:68 Cura/gui/preferencesDialog.py:84\r
 msgid "Machine settings"\r
 msgstr ""\r
 \r
@@ -699,6 +977,22 @@ msgstr ""
 msgid "Communication settings"\r
 msgstr ""\r
 \r
+#: Cura/gui/preferencesDialog.py:119\r
+msgid "Ok"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:123\r
+msgid "Add new machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:127\r
+msgid "Remove machine"\r
+msgstr ""\r
+\r
+#: Cura/gui/preferencesDialog.py:131 Cura/gui/preferencesDialog.py:168\r
+msgid "Change machine name"\r
+msgstr ""\r
+\r
 #: Cura/gui/preferencesDialog.py:154\r
 msgid "Cannot remove the last machine configuration in Cura"\r
 msgstr ""\r
@@ -711,10 +1005,6 @@ msgstr ""
 msgid "Enter the new name:"\r
 msgstr ""\r
 \r
-#: Cura/gui/preferencesDialog.py:168\r
-msgid "Change machine name"\r
-msgstr ""\r
-\r
 #: Cura/gui/printWindow.py:33 Cura/gui/printWindow.py:312\r
 #, python-format\r
 msgid "Printing on %s"\r
@@ -860,7 +1150,7 @@ msgstr ""
 msgid "Save 3D model"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:914\r
+#: Cura/gui/sceneView.py:276 Cura/gui/sceneView.py:915\r
 #, python-format\r
 msgid "Print with %s"\r
 msgstr ""\r
@@ -869,63 +1159,63 @@ msgstr ""
 msgid "Slice engine log..."\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:917\r
+#: Cura/gui/sceneView.py:305 Cura/gui/sceneView.py:918\r
 msgid "Save toolpath"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:351\r
+#: Cura/gui/sceneView.py:352\r
 msgid "The slicing engine reported the following"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:351\r
+#: Cura/gui/sceneView.py:352\r
 msgid "Engine log..."\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "How many copies do you want?"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "Number of copies"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:490\r
+#: Cura/gui/sceneView.py:491\r
 msgid "Multiply"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:780\r
+#: Cura/gui/sceneView.py:781\r
 msgid "Center on platform"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:781\r
+#: Cura/gui/sceneView.py:782\r
 msgid "Delete object"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:782\r
+#: Cura/gui/sceneView.py:783\r
 msgid "Multiply object"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:783\r
+#: Cura/gui/sceneView.py:784\r
 msgid "Split object into parts"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:785\r
+#: Cura/gui/sceneView.py:786\r
 msgid "Dual extrusion merge"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:787\r
+#: Cura/gui/sceneView.py:788\r
 msgid "Delete all objects"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:788\r
+#: Cura/gui/sceneView.py:789\r
 msgid "Reload all objects"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:911\r
+#: Cura/gui/sceneView.py:912\r
 msgid "Toolpath to SD"\r
 msgstr ""\r
 \r
-#: Cura/gui/sceneView.py:1205\r
+#: Cura/gui/sceneView.py:1206\r
 msgid "Overhang view not working due to lack of OpenGL shaders support."\r
 msgstr ""\r
 \r
@@ -2347,3 +2637,23 @@ msgid ""
 "A bottom layer of more then %.2fmm (3/4 nozzle size) usually give bad "\r
 "results and is not recommended."\r
 msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:92\r
+#, python-format\r
+msgid "%d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:94\r
+#, python-format\r
+msgid "%d hour %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:95\r
+#, python-format\r
+msgid "%d hours %d minutes"\r
+msgstr ""\r
+\r
+#: Cura/util/sliceEngine.py:100\r
+#, python-format\r
+msgid "%0.2f meter %0.0f gram"\r
+msgstr ""\r