<filename>.ini</filename> files.</para>
<para>This man pages lists the common configuration
- options of the all unit types. These options need to
+ options of all the unit types. These options need to
be configured in the [Unit] resp. [Install]
section of the unit files.</para>
<para>In addition to the generic [Unit] and [Install]
- sections described here each unit should have a
+ sections described here, each unit should have a
type-specific section, e.g. [Service] for a service
unit. See the respective man pages for more
information.</para>
written in various formats. A stand-alone number
specifies a time in seconds. If suffixed with a time
unit, the unit is honored. A concatenation of
- multiple value with units is supported, in which case
+ multiple values with units is supported, in which case
the values are added up. Example: "50" refers to 50
seconds; "2min 200ms" refers to 2 minutes plus 200
milliseconds, i.e. 120200ms. The following time units
are understood: s, min, h, d, w, ms, us.</para>
<para>Empty lines and lines starting with # or ; are
- ignored. This may be used for commenting.</para>
+ ignored. This may be used for commenting. Lines ending
+ in a backslash are concatenated with the following
+ line while reading and the backslash is replaced by a
+ space character. This may be used to wrap long lines.</para>
<para>If a line starts with <option>.include</option>
- followed by a file name the specified file will be
- read as if its contents where listed in place of the
+ followed by a file name, the specified file will be
+ read as if its contents were listed in place of the
<option>.include</option> directive.</para>
<para>Along with a unit file
<varname>Wanted=</varname> see below. The preferred
way to create symlinks in the
<filename>.wants/</filename> directory of a service is
- with the
- <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ with the <command>enable</command> command of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
tool which reads information from the [Install]
section of unit files. (See below.)</para>
<filename>dev-sda.device</filename> refers to a device
with the device node <filename>/dev/sda</filename> in
the file system namespace. If this applies a special
- way to escape the path name is used, so that it is
- usable as part of a file name. Basically, given a
- path, "/" is replaced by "-", and all unprintable
- characters and the "-" are replaced by C-style "\x20"
- escapes. The root directory "/" is encoded as single
- dash, while otherwise the initial and ending "/" is
- removed from all paths during transformation. This
- escaping is reversible.</para>
+ way to escape the path name is used, so that the
+ result is usable as part of a file name. Basically,
+ given a path, "/" is replaced by "-", and all
+ unprintable characters and the "-" are replaced by
+ C-style "\x20" escapes. The root directory "/" is
+ encoded as single dash, while otherwise the initial
+ and ending "/" is removed from all paths during
+ transformation. This escaping is reversible.</para>
<para>Optionally, units may be instantiated from a
template file at runtime. This allows creation of
respectively. The prefix name here refers to the
string before the @, i.e. "getty" in the example
above, where "tty3" is the instance name.</para>
+
+ <para>The unit file format is covered by the
+ <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/InterfaceStabilityPromise">Interface
+ Stability Promise</ulink>.</para>
</refsect1>
<refsect1>
<listitem><para>Configures requirement
dependencies on other units. If this
- units get activated the units listed
+ unit gets activated, the units listed
here will be activated as well. If one
of the other units gets deactivated or
its activation fails, this unit will
Dependencies listed in
<varname>RequiresOverridable=</varname>
which cannot be fulfilled or fail to
- start are ignored iff the startup was
+ start are ignored if the startup was
explicitly requested by the user. If
the start-up was pulled in indirectly
by some dependency or automatic
<varname>Requires=</varname>. A unit
listed in this option will be started
if the configuring unit is. However,
- it the listed unit fails to start up
+ if the listed unit fails to start up
or cannot be added to the transaction
this has no impact on the validity of
the transaction as a whole. This is
<listitem><para>Configures negative
requirement dependencies. If a unit
- that has a
+ has a
<varname>Conflicts=</varname> setting
- on another unit starting the former
+ on another unit, starting the former
will stop the latter and vice
versa. Note that this setting is
independent of and orthogonal to the
<varname>After=</varname> and
<varname>Before=</varname> ordering
- dependencies.</para></listitem>
+ dependencies.</para>
+
+ <para>If a unit A that conflicts with
+ a unit B is scheduled to be started at
+ the same time as B, the transaction
+ will either fail (in case both are
+ required part of the transaction) or
+ be modified to be fixed (in case one
+ or both jobs are not a required part
+ of the transaction). In the latter
+ case the job that is not the required
+ will be removed, or in case both are
+ not required the unit that conflicts
+ will be started and the unit that is
+ conflicted is
+ stopped.</para></listitem>
</varlistentry>
<varlistentry>
<filename>foo.service</filename>
contains a setting
<option>Before=bar.service</option>
- and both units are being started
+ and both units are being started,
<filename>bar.service</filename>'s
start-up is delayed until
<filename>foo.service</filename> is
listed unit is started. Note that when
two units with an ordering dependency
between them are shut down, the
- inverse of of the start-up order is
+ inverse of the start-up order is
applied. i.e. if a unit is configured
with <varname>After=</varname> on
another unit, the former is stopped
place. </para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>OnFailure=</varname></term>
+
+ <listitem><para>Lists one or more
+ units that are activated when this
+ unit enters the
+ '<literal>failed</literal>'
+ state.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>RecursiveStop=</varname></term>
<listitem><para>Takes a boolean
argument. If <option>true</option> and
- the unit stops without this being
- requested by the user all units
+ the unit stops without being requested
+ by the user, all units
depending on it will be stopped as
well. (e.g. if a service exits or
crashes on its own behalf, units using
it will be stopped) Note that normally
- if a unit stops without user request
+ if a unit stops without a user request,
units depending on it will not be
terminated. Only if the user requested
- shutdown of a unit all units depending
- on the unit will be shut down as well
+ shutdown of a unit, all units depending
+ on that unit will be shut down as well
and at the same time. Defaults to
<option>false</option>.</para></listitem>
</varlistentry>
argument. If <option>true</option>
this unit will be stopped when it is
no longer used. Note that in order to
- minimize the work to be executed
- systemd will by default not stop units
+ minimize the work to be executed,
+ systemd will not stop units by default
unless they are conflicting with other
units, or the user explicitly
requested their shut down. If this
- option is set a unit will be
+ option is set, a unit will be
automatically cleaned up if no other
active unit requires it. Defaults to
<option>false</option>.</para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>OnlyByDependency=</varname></term>
+ <term><varname>RefuseManualStart=</varname></term>
+ <term><varname>RefuseManualStop=</varname></term>
<listitem><para>Takes a boolean
argument. If <option>true</option>
- this unit may only be activated
- indirectly. In this case explicit
- start-up requested by the user is
- denied, however if it is started as
- dependency of another unit start-up
- will succeed. This is mostly a safety
- feature to ensure that the user does
- not accidentally activate units that are
- not intended to be activated
- explicitly. This option defaults to
+ this unit can only be activated
+ (resp. deactivated) indirectly. In
+ this case explicit start-up
+ (resp. termination) requested by the
+ user is denied, however if it is
+ started (resp. stopped) as a
+ dependency of another unit, start-up
+ (resp. termination) will succeed. This
+ is mostly a safety feature to ensure
+ that the user does not accidentally
+ activate units that are not intended
+ to be activated explicitly, and not
+ accidentally deactivate units that are
+ not intended to be deactivated.
+ These options default to
+ <option>false</option>.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>AllowIsolate=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option>
+ this unit may be used with the
+ <command>systemctl isolate</command>
+ command. Otherwise this will be
+ refused. It probably is a good idea to
+ leave this disabled except for target
+ units that shall be used similar to
+ runlevels in SysV init systems, just
+ as a precaution to avoid unusable
+ system states. This option defaults to
<option>false</option>.</para></listitem>
</varlistentry>
units, these dependencies ensure that
the service is started only after
basic system initialization is
- complete and is properly terminated on
+ completed and is properly terminated on
system shutdown. See the respective
man pages for details. Generally, only
services involved with early boot or
ones.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>IgnoreDependencyFailure=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If <option>true</option> and
+ a requirement dependency of this unit
+ fails to start up this unit will be
+ started nonetheless, ignoring that
+ failure. If <option>false</option>
+ (the default) and a dependency unit
+ fails the unit will immediately fail
+ too and the job is removed.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>JobTimeoutSec=</varname></term>
+
+ <listitem><para>When clients are
+ waiting for a job of this unit to
+ complete, time out after the specified
+ time. If this time limit is reached
+ the job will be cancelled, the unit
+ however will not change state or even
+ enter the '<literal>failed</literal>'
+ mode. This value defaults to 0 (job
+ timeouts disabled), except for device
+ units. NB: this timeout is independent
+ from any unit-specific timeout (for
+ example, the timeout set with
+ <varname>Timeout=</varname> in service
+ units) as the job timeout has no
+ effect on the unit itself, only on the
+ job that might be pending for it. Or
+ in other words: unit-specific timeouts
+ are useful to abort unit state
+ changes, and revert them. The job
+ timeout set with this option however
+ is useful to abort only the job
+ waiting for the unit state to
+ change.</para></listitem>
+ </varlistentry>
+
</variablelist>
<para>Unit file may include a [Install] section, which
section is not interpreted by
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
during runtime. It is used exclusively by the
- <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ <command>enable</command> and
+ <command>disable</command> commands of the
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
tool during installation of a unit:</para>
<variablelist>
more than once, in which case all
listed names are used. At installation
time,
- <command>systemd-install</command>
+ <command>systemctl enable</command>
will create symlinks from these names
to the unit file name. Note that this
is different from the
<varname>Alias=</varname> apply only
if the unit has actually been
installed with the
- <command>systemd-install</command>
- tool. Also, if systemd searches for a
+ <command>systemctl enable</command>
+ command. Also, if systemd searches for a
unit, it will discover symlinked alias
names as configured with
<varname>Alias=</varname>, but not
install when this unit is
installed. If the user requests
installation of a unit with this
- option configured
- <command>systemd-install</command>
+ option configured,
+ <command>systemctl enable</command>
will automatically install units
listed in this option as
well.</para></listitem>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd-install</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,