<filename>...</filename>
</literallayout></para>
- <para><literallayout><filename>$HOME/.config/systemd/user/*</filename>
+ <para><literallayout><filename>$XDG_CONFIG_HOME/systemd/user/*</filename>
+<filename>$HOME/.config/systemd/user/*</filename>
<filename>/etc/systemd/user/*</filename>
<filename>/run/systemd/user/*</filename>
+<filename>$XDG_DATA_HOME/systemd/user/*</filename>
+<filename>$HOME/.local/share/systemd/user/*</filename>
<filename>/usr/lib/systemd/user/*</filename>
<filename>...</filename>
</literallayout></para>
<citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>.
</para>
+ <para>Various settings are allowed to be specified
+ more than once, in which case the interpretation
+ depends on the setting. Often, multiple settings form
+ a list, and setting to an empty value "resets", which
+ means that previous assignments are ignored. When this
+ is allowed, it is mentioned in the description of the
+ setting. Note that using multiple assignments to the
+ same value makes the unit file incompatible with
+ parsers for the XDG <filename>.desktop</filename> file
+ format.</para>
+
<para>Unit files are loaded from a set of paths
determined during compilation, described in the next section.
</para>
<para>Unit files may contain additional options on top
of those listed here. If systemd encounters an unknown
option, it will write a warning log message but
- continue loading the unit. If an option is prefixed
- with <option>X-</option>, it is ignored completely by
- systemd. Applications may use this to include
- additional information in the unit files.</para>
+ continue loading the unit. If an option or section name
+ is prefixed with <option>X-</option>, it is ignored
+ completely by systemd. Options within an ignored
+ section do not need the prefix. Applications may use
+ this to include additional information in the unit
+ files.</para>
<para>Boolean arguments used in unit files can be
written in various formats. For positive settings the
settings to a unit, without having to modify their
unit files. Make sure that the file that is included
has the appropriate section headers before any
- directive.</para>
-
- <para>If a line starts with <option>.include</option>
- followed by a filename, the specified file will be
- parsed at this point. Make sure that the file that is
- included has the appropriate section headers before
- any directives.</para>
+ directive. Note that for instanced units this logic
+ will first look for the instance
+ <literal>.d/</literal> subdirectory and read its
+ <literal>.conf</literal> files, followed by the
+ template <literal>.d/</literal> subdirectory and reads
+ its <literal>.conf</literal> files.</para>
<para>Note that while systemd offers a flexible
dependency system between units it is recommended to
multiple units from a single configuration file. If
systemd looks for a unit configuration file, it will
first search for the literal unit name in the
- filesystem. If that yields no success and the unit
+ file system. If that yields no success and the unit
name contains an <literal>@</literal> character, systemd will look for a
unit template that shares the same name but with the
instance string (i.e. the part between the <literal>@</literal> character
(<option>--user</option>) and the variable
<varname>$SYSTEMD_UNIT_PATH</varname> is set, this
contents of this variable overrides the unit load
- path.
- </para>
+ path. If <varname>$SYSTEMD_UNIT_PATH</varname> ends
+ with an empty component (<literal>:</literal>), the
+ usual unit load path will be appended to the contents
+ of the variable.</para>
<table>
<title>
</row>
</thead>
<tbody>
+ <row>
+ <entry><filename>$XDG_CONFIG_HOME/systemd/user</filename></entry>
+ <entry>User configuration (only used when $XDG_CONFIG_HOME is set)</entry>
+ </row>
<row>
<entry><filename>$HOME/.config/systemd/user</filename></entry>
- <entry>User configuration</entry>
+ <entry>User configuration (only used when $XDG_CONFIG_HOME is not set)</entry>
</row>
<row>
<entry><filename>/etc/systemd/user</filename></entry>
<entry><filename>/run/systemd/user</filename></entry>
<entry>Runtime units</entry>
</row>
+ <row>
+ <entry><filename>$XDG_DATA_HOME/systemd/user</filename></entry>
+ <entry>Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is set)</entry>
+ </row>
+ <row>
+ <entry><filename>$HOME/.local/share/systemd/user</filename></entry>
+ <entry>Units of packages that have been installed in the home directory (only used when $XDG_DATA_HOME is not set)</entry>
+ </row>
<row>
<entry><filename>/usr/lib/systemd/user</filename></entry>
- <entry>Units of installed packages</entry>
+ <entry>Units of packages that have been installed system-wide</entry>
</row>
</tbody>
</tgroup>
</refsect1>
<refsect1>
- <title>Options</title>
+ <title>[Unit] Section Options</title>
<para>Unit file may include a [Unit] section, which
carries generic information about the unit that is not
<literal>man:</literal>. For more
information about the syntax of these
URIs, see
- <citerefentry><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The
+ <citerefentry project='man-pages'><refentrytitle>uri</refentrytitle><manvolnum>7</manvolnum></citerefentry>. The
URIs should be listed in order of
relevance, starting with the most
relevant. It is a good idea to first
what the unit's purpose is, followed
by how it is configured, followed by
any other related documentation. This
- option may be specified more than once
+ option may be specified more than once,
in which case the specified list of
URIs is merged. If the empty string is
assigned to this option, the list is
of the other units gets deactivated or
its activation fails, this unit will
be deactivated. This option may be
- specified more than once, in which
- case requirement dependencies for all
- listed names are created. Note that
- requirement dependencies do not
+ specified more than once or multiple
+ space-separated units may be specified
+ in one option in which case
+ requirement dependencies for all
+ listed names will be created. Note
+ that requirement dependencies do not
influence the order in which services
are started or stopped. This has to be
configured independently with the
<term><varname>RequisiteOverridable=</varname></term>
<listitem><para>Similar to
- <varname>Requires=</varname>
- and <varname>RequiresOverridable=</varname>, respectively. However,
- if a unit listed here is not started
- already it will not be started and the
- transaction fails
- immediately.</para></listitem>
+ <varname>Requires=</varname> and
+ <varname>RequiresOverridable=</varname>,
+ respectively. However, if the units
+ listed here are not started already,
+ they will not be started and the
+ transaction will fail immediately.
+ </para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Wants=</varname></term>
<listitem><para>A weaker version of
- <varname>Requires=</varname>. A unit
+ <varname>Requires=</varname>. Units
listed in this option will be started
if the configuring unit is. However,
- if the listed unit fails to start up
- or cannot be added to the transaction
+ if the listed units fail to start
+ or cannot be added to the transaction,
this has no impact on the validity of
the transaction as a whole. This is
the recommended way to hook start-up
<para>Note that dependencies of this
type may also be configured outside of
- the unit configuration file by
- adding a symlink to a
+ the unit configuration file by adding
+ symlinks to a
<filename>.wants/</filename> directory
accompanying the unit file. For
- details see above.</para></listitem>
+ details, see above.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>Configures requirement
dependencies, very similar in style to
<varname>Requires=</varname>, however
- in addition to this behavior it also
+ in addition to this behavior, it also
declares that this unit is stopped
when any of the units listed suddenly
disappears. Units can suddenly,
of units. When systemd stops or restarts
the units listed here, the action is
propagated to this unit.
- Note that this is a one way dependency -
+ Note that this is a one-way dependency —
changes to this unit do not affect the
listed units.
</para></listitem>
<varlistentry>
<term><varname>Conflicts=</varname></term>
- <listitem><para>Configures negative
+ <listitem><para>A space-separated list
+ of unit names. Configures negative
requirement dependencies. If a unit
- has a
- <varname>Conflicts=</varname> setting
- on another unit, starting the former
- will stop the latter and vice
+ has a <varname>Conflicts=</varname>
+ setting on another unit, starting the
+ former will stop the latter and vice
versa. Note that this setting is
independent of and orthogonal to the
<varname>After=</varname> and
be modified to be fixed (in case one
or both jobs are not a required part
of the transaction). In the latter
- case the job that is not the required
+ case, the job that is not the required
will be removed, or in case both are
- not required the unit that conflicts
+ not required, the unit that conflicts
will be started and the unit that is
conflicted is
stopped.</para></listitem>
<term><varname>Before=</varname></term>
<term><varname>After=</varname></term>
- <listitem><para>Configures ordering
+ <listitem><para>A space-separated list
+ of unit names. Configures ordering
dependencies between units. If a unit
<filename>foo.service</filename>
contains a setting
a common pattern to include a unit
name in both the
<varname>After=</varname> and
- <varname>Requires=</varname> option in
+ <varname>Requires=</varname> option, in
which case the unit listed will be
started before the unit that is
configured with these options. This
dependency on another unit is shut
down while the latter is started up,
the shut down is ordered before the
- start-up regardless whether the
+ start-up regardless of whether the
ordering dependency is actually of
type <varname>After=</varname> or
<varname>Before=</varname>. If two
units have no ordering dependencies
- between them, they are shut down
- or started up simultaneously, and
- no ordering takes
+ between them, they are shut down or
+ started up simultaneously, and no
+ ordering takes
place. </para></listitem>
</varlistentry>
<varlistentry>
<term><varname>OnFailure=</varname></term>
- <listitem><para>Lists one or more
- units that are activated when this
- unit enters the
+ <listitem><para>A space-separated list
+ of one or more units that are
+ activated when this unit enters the
<literal>failed</literal>
state.</para></listitem>
</varlistentry>
<term><varname>PropagatesReloadTo=</varname></term>
<term><varname>ReloadPropagatedFrom=</varname></term>
- <listitem><para>Lists one or more
- units where reload requests on the
- unit will be propagated to/on the
- other unit will be propagated
- from. Issuing a reload request on a
- unit will automatically also enqueue a
- reload request on all units that the
- reload request shall be propagated to
- via these two
- settings.</para></listitem>
+ <listitem><para>A space-separated list
+ of one or more units where reload
+ requests on this unit will be
+ propagated to, or reload requests on
+ the other unit will be propagated to
+ this unit, respectively. Issuing a
+ reload request on a unit will
+ automatically also enqueue a reload
+ request on all units that the reload
+ request shall be propagated to via
+ these two settings.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>JoinsNamespaceOf=</varname></term>
+
+ <listitem><para>For units that start
+ processes (such as service units),
+ lists one or more other units whose
+ network and/or temporary file
+ namespace to join. This only applies
+ to unit types which support the
+ <varname>PrivateNetwork=</varname> and
+ <varname>PrivateTmp=</varname>
+ directives (see
+ <citerefentry><refentrytitle>systemd.exec</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ for details). If a unit that has this
+ setting set is started, its processes
+ will see the same
+ <filename>/tmp</filename>,
+ <filename>/tmp/var</filename> and
+ network namespace as one listed unit
+ that is started. If multiple listed
+ units are already started, it is not
+ defined which namespace is
+ joined. Note that this setting only
+ has an effect if
+ <varname>PrivateNetwork=</varname>
+ and/or <varname>PrivateTmp=</varname>
+ is enabled for both the unit that
+ joins the namespace and the unit whose
+ namespace is joined.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>RequiresMountsFor=</varname></term>
- <listitem><para>Takes a space-separated
- list of absolute paths. Automatically
- adds dependencies of type
- <varname>Requires=</varname> and
- <varname>After=</varname> for all
+ <listitem><para>Takes a
+ space-separated list of absolute
+ paths. Automatically adds dependencies
+ of type <varname>Requires=</varname>
+ and <varname>After=</varname> for all
mount units required to access the
- specified path.</para></listitem>
+ specified path.</para>
+
+ <para>Mount points marked with
+ <option>noauto</option> are not
+ mounted automatically and will be
+ ignored for the purposes of this
+ option. If such a mount should be a
+ requirement for this unit,
+ direct dependencies on the mount
+ units may be added
+ (<varname>Requires=</varname> and
+ <varname>After=</varname> or
+ some other combination).
+ </para></listitem>
</varlistentry>
<varlistentry>
- <term><varname>OnFailureIsolate=</varname></term>
-
- <listitem><para>Takes a boolean
- argument. If <option>true</option>, the
- unit listed in
+ <term><varname>OnFailureJobMode=</varname></term>
+
+ <listitem><para>Takes a value of
+ <literal>fail</literal>,
+ <literal>replace</literal>,
+ <literal>replace-irreversibly</literal>,
+ <literal>isolate</literal>,
+ <literal>flush</literal>,
+ <literal>ignore-dependencies</literal>
+ or
+ <literal>ignore-requirements</literal>. Defaults
+ to
+ <literal>replace</literal>. Specifies
+ how the units listed in
<varname>OnFailure=</varname> will be
- enqueued in isolation mode, i.e. all
- units that are not its dependency will
- be stopped. If this is set, only a
+ enqueued. See
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>'s
+ <option>--job-mode=</option> option
+ for details on the possible values. If
+ this is set to
+ <literal>isolate</literal>, only a
single unit may be listed in
- <varname>OnFailure=</varname>. Defaults
- to
- <option>false</option>.</para></listitem>
+ <varname>OnFailure=</varname>..</para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
+ <term><varname>ConditionArchitecture=</varname></term>
+ <term><varname>ConditionVirtualization=</varname></term>
+ <term><varname>ConditionHost=</varname></term>
+ <term><varname>ConditionKernelCommandLine=</varname></term>
+ <term><varname>ConditionSecurity=</varname></term>
+ <term><varname>ConditionCapability=</varname></term>
+ <term><varname>ConditionACPower=</varname></term>
+ <term><varname>ConditionNeedsUpdate=</varname></term>
+ <term><varname>ConditionFirstBoot=</varname></term>
<term><varname>ConditionPathExists=</varname></term>
<term><varname>ConditionPathExistsGlob=</varname></term>
<term><varname>ConditionPathIsDirectory=</varname></term>
<term><varname>ConditionDirectoryNotEmpty=</varname></term>
<term><varname>ConditionFileNotEmpty=</varname></term>
<term><varname>ConditionFileIsExecutable=</varname></term>
- <term><varname>ConditionKernelCommandLine=</varname></term>
- <term><varname>ConditionVirtualization=</varname></term>
- <term><varname>ConditionSecurity=</varname></term>
- <term><varname>ConditionCapability=</varname></term>
- <term><varname>ConditionHost=</varname></term>
- <term><varname>ConditionACPower=</varname></term>
<term><varname>ConditionNull=</varname></term>
<listitem><para>Before starting a unit
queued start job is to be
executed.</para>
- <para>With
- <varname>ConditionPathExists=</varname>
- a file existence condition is
- checked before a unit is started. If
- the specified absolute path name does
- not exist, the condition will
- fail. If the absolute path name passed
- to
- <varname>ConditionPathExists=</varname>
- is prefixed with an exclamation mark
- (<literal>!</literal>), the test is negated, and the unit
- is only started if the path does not
- exist.</para>
-
- <para><varname>ConditionPathExistsGlob=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>,
- but checks for the existence of at
- least one file or directory matching
- the specified globbing pattern.</para>
-
- <para><varname>ConditionPathIsDirectory=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists and is a
- directory.</para>
-
- <para><varname>ConditionPathIsSymbolicLink=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists and is a symbolic
- link.</para>
-
- <para><varname>ConditionPathIsMountPoint=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists and is a mount
- point.</para>
-
- <para><varname>ConditionPathIsReadWrite=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether the underlying
- file system is readable and writable
- (i.e. not mounted
- read-only).</para>
-
- <para><varname>ConditionDirectoryNotEmpty=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists and is a non-empty
- directory.</para>
-
- <para><varname>ConditionFileNotEmpty=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists and refers to a regular file
- with a non-zero size.</para>
-
- <para><varname>ConditionFileIsExecutable=</varname>
- is similar to
- <varname>ConditionPathExists=</varname>
- but verifies whether a certain path
- exists, is a regular file and marked
- executable.</para>
-
- <para>Similar,
- <varname>ConditionKernelCommandLine=</varname>
- may be used to check whether a
- specific kernel command line option is
- set (or if prefixed with the
- exclamation mark unset). The argument
- must either be a single word, or an
- assignment (i.e. two words, separated
- <literal>=</literal>). In the former
- case the kernel command line is
- searched for the word appearing as is,
- or as left hand side of an
- assignment. In the latter case the
- exact assignment is looked for with
- right and left hand side
- matching.</para>
+ <para><varname>ConditionArchitecture=</varname>
+ may be used to check whether the
+ system is running on a specific
+ architecture. Takes one of
+ <varname>x86</varname>,
+ <varname>x86-64</varname>,
+ <varname>ppc</varname>,
+ <varname>ppc-le</varname>,
+ <varname>ppc64</varname>,
+ <varname>ppc64-le</varname>,
+ <varname>ia64</varname>,
+ <varname>parisc</varname>,
+ <varname>parisc64</varname>,
+ <varname>s390</varname>,
+ <varname>s390x</varname>,
+ <varname>sparc</varname>,
+ <varname>sparc64</varname>,
+ <varname>mips</varname>,
+ <varname>mips-le</varname>,
+ <varname>mips64</varname>,
+ <varname>mips64-le</varname>,
+ <varname>alpha</varname>,
+ <varname>arm</varname>,
+ <varname>arm-be</varname>,
+ <varname>arm64</varname>,
+ <varname>arm64-be</varname>,
+ <varname>sh</varname>,
+ <varname>sh64</varname>,
+ <varname>m86k</varname>,
+ <varname>tilegx</varname>,
+ <varname>cris</varname> to test
+ against a specific architecture. The
+ architecture is determined from the
+ information returned by
+ <citerefentry><refentrytitle>uname</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ and is thus subject to
+ <citerefentry><refentrytitle>personality</refentrytitle><manvolnum>2</manvolnum></citerefentry>. Note
+ that a <varname>Personality=</varname>
+ setting in the same unit file has no
+ effect on this condition. A special
+ architecture name
+ <varname>native</varname> is mapped to
+ the architecture the system manager
+ itself is compiled for. The test may
+ be negated by prepending an
+ exclamation mark.</para>
<para><varname>ConditionVirtualization=</varname>
may be used to check whether the
virtualization solution, or one of
<varname>qemu</varname>,
<varname>kvm</varname>,
+ <varname>zvm</varname>,
<varname>vmware</varname>,
<varname>microsoft</varname>,
<varname>oracle</varname>,
<varname>xen</varname>,
<varname>bochs</varname>,
- <varname>chroot</varname>,
<varname>uml</varname>,
<varname>openvz</varname>,
<varname>lxc</varname>,
test may be negated by prepending an
exclamation mark.</para>
+ <para><varname>ConditionHost=</varname>
+ may be used to match against the
+ hostname or machine ID of the
+ host. This either takes a hostname
+ string (optionally with shell style
+ globs) which is tested against the
+ locally set hostname as returned by
+ <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
+ or a machine ID formatted as string
+ (see
+ <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
+ The test may be negated by prepending
+ an exclamation mark.</para>
+
+ <para><varname>ConditionKernelCommandLine=</varname>
+ may be used to check whether a
+ specific kernel command line option is
+ set (or if prefixed with the
+ exclamation mark unset). The argument
+ must either be a single word, or an
+ assignment (i.e. two words, separated
+ <literal>=</literal>). In the former
+ case the kernel command line is
+ searched for the word appearing as is,
+ or as left hand side of an
+ assignment. In the latter case, the
+ exact assignment is looked for with
+ right and left hand side
+ matching.</para>
+
<para><varname>ConditionSecurity=</varname>
may be used to check whether the given
security module is enabled on the
(i.e. this does not check whether
capability is actually available in
the permitted or effective sets, see
- <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
+ <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
for details). Pass a capability name
such as <literal>CAP_MKNOD</literal>,
possibly prefixed with an exclamation
mark to negate the check.</para>
- <para><varname>ConditionHost=</varname>
- may be used to match against the
- hostname or machine ID of the
- host. This either takes a hostname
- string (optionally with shell style
- globs) which is tested against the
- locally set hostname as returned by
- <citerefentry><refentrytitle>gethostname</refentrytitle><manvolnum>2</manvolnum></citerefentry>,
- or a machine ID formatted as string
- (see
- <citerefentry><refentrytitle>machine-id</refentrytitle><manvolnum>5</manvolnum></citerefentry>).
- The test may be negated by prepending
- an exclamation mark.</para>
-
<para><varname>ConditionACPower=</varname>
may be used to check whether the
system has AC power, or is exclusively
all AC connectors are disconnected
from a power source.</para>
+ <para><varname>ConditionNeedsUpdate=</varname>
+ takes one of <filename>/var</filename>
+ or <filename>/etc</filename> as
+ argument, possibly prefixed with a
+ <literal>!</literal> (for inverting
+ the condition). This condition may be
+ used to conditionalize units on
+ whether the specified directory
+ requires an update because
+ <filename>/usr</filename>'s
+ modification time is newer than the
+ stamp file
+ <filename>.updated</filename> in the
+ specified directory. This is useful to
+ implement offline updates of the
+ vendor operating system resources in
+ <filename>/usr</filename> that require
+ updating of <filename>/etc</filename>
+ or <filename>/var</filename> on the
+ next following boot. Units making use
+ of this condition should order
+ themselves before
+ <citerefentry><refentrytitle>systemd-update-done.service</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ to make sure they run before the stamp
+ files's modification time gets reset
+ indicating a completed update.</para>
+
+ <para><varname>ConditionFirstBoot=</varname>
+ takes a boolean argument. This
+ condition may be used to
+ conditionalize units on whether the
+ system is booting up with an
+ unpopulated <filename>/etc</filename>
+ directory. This may be used to
+ populate <filename>/etc</filename> on
+ the first boot after factory reset, or
+ when a new system instances boots up
+ for the first time.</para>
+
+ <para>With
+ <varname>ConditionPathExists=</varname>
+ a file existence condition is
+ checked before a unit is started. If
+ the specified absolute path name does
+ not exist, the condition will
+ fail. If the absolute path name passed
+ to
+ <varname>ConditionPathExists=</varname>
+ is prefixed with an exclamation mark
+ (<literal>!</literal>), the test is negated, and the unit
+ is only started if the path does not
+ exist.</para>
+
+ <para><varname>ConditionPathExistsGlob=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>,
+ but checks for the existence of at
+ least one file or directory matching
+ the specified globbing pattern.</para>
+
+ <para><varname>ConditionPathIsDirectory=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a
+ directory.</para>
+
+ <para><varname>ConditionPathIsSymbolicLink=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a symbolic
+ link.</para>
+
+ <para><varname>ConditionPathIsMountPoint=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a mount
+ point.</para>
+
+ <para><varname>ConditionPathIsReadWrite=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether the underlying
+ file system is readable and writable
+ (i.e. not mounted
+ read-only).</para>
+
+ <para><varname>ConditionDirectoryNotEmpty=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and is a non-empty
+ directory.</para>
+
+ <para><varname>ConditionFileNotEmpty=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists and refers to a regular file
+ with a non-zero size.</para>
+
+ <para><varname>ConditionFileIsExecutable=</varname>
+ is similar to
+ <varname>ConditionPathExists=</varname>
+ but verifies whether a certain path
+ exists, is a regular file and marked
+ executable.</para>
+
<para>Finally,
<varname>ConditionNull=</varname> may
be used to add a constant condition
useful for implementation of generator
tools that convert configuration from
an external configuration file format
- into native unit files. Thus
+ into native unit files. This
functionality should not be used in
normal units.</para></listitem>
</varlistentry>
</variablelist>
- <para>Unit file may include a [Install] section, which
- carries installation information for the unit. This
- section is not interpreted by
+ </refsect1>
+
+ <refsect1>
+ <title>[Install] Section Options</title>
+
+ <para>Unit file may include an
+ <literal>[Install]</literal> section, which carries
+ installation information for the unit. This section is
+ not interpreted by
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>
during runtime. It is used exclusively by the
<command>enable</command> and
<varlistentry>
<term><varname>Alias=</varname></term>
- <listitem><para>Additional names this
- unit shall be installed under. The
- names listed here must have the same
- suffix (i.e. type) as the unit file
- name. This option may be specified
- more than once, in which case all
- listed names are used. At installation
- time,
- <command>systemctl enable</command>
- will create symlinks from these names
- to the unit filename.</para></listitem>
+ <listitem><para>A space-separated list
+ of additional names this unit shall be
+ installed under. The names listed here
+ must have the same suffix (i.e. type)
+ as the unit file name. This option may
+ be specified more than once, in which
+ case all listed names are used. At
+ installation time, <command>systemctl
+ enable</command> will create symlinks
+ from these names to the unit
+ filename.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>WantedBy=</varname></term>
<term><varname>RequiredBy=</varname></term>
- <listitem><para>A symbolic link is
- created in the
- <filename>.wants/</filename> or
- <filename>.requires/</filename> directory
- of the listed unit when this unit is
- activated by <command>systemctl
- enable</command>. This has the effect
- that a dependency of type
- <varname>Wants=</varname> or
+ <listitem><para>This option may be
+ used more than once, or a
+ space-separated list of unit names may
+ be given. A symbolic link is created
+ in the <filename>.wants/</filename> or
+ <filename>.requires/</filename>
+ directory of each of the listed units
+ when this unit is installed by
+ <command>systemctl enable</command>.
+ This has the effect that a dependency
+ of type <varname>Wants=</varname> or
<varname>Requires=</varname> is added
from the listed unit to the current
unit. The primary result is that the
and <command>systemctl
disable</command> will automatically
install/uninstall units listed in this option as
- well.</para></listitem>
+ well.</para>
+
+ <para>This option may be used more
+ than once, or a space-separated list
+ of unit names may be
+ given.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>DefaultInstance=</varname></term>
+
+ <listitem><para>In template unit files,
+ this specifies for which instance the
+ unit shall be enabled if the template
+ is enabled without any explicitly set
+ instance. This option has no effect in
+ non-template unit files. The specified
+ string must be usable as instance
+ identifier.</para></listitem>
</varlistentry>
</variablelist>
<row>
<entry><literal>%N</literal></entry>
<entry>Unescaped full unit name</entry>
- <entry></entry>
+ <entry>Same as <literal>%n</literal>, but with escaping undone</entry>
</row>
<row>
<entry><literal>%p</literal></entry>
<entry>Prefix name</entry>
- <entry>For instantiated units this refers to the string before the @. For non-instantiated units this refers to to the name of the unit with the type suffix removed.</entry>
+ <entry>For instantiated units, this refers to the string before the <literal>@</literal> character of the unit name. For non-instantiated units, this refers to the name of the unit with the type suffix removed.</entry>
</row>
<row>
<entry><literal>%P</literal></entry>
<entry>Unescaped prefix name</entry>
- <entry></entry>
+ <entry>Same as <literal>%p</literal>, but with escaping undone</entry>
</row>
<row>
<entry><literal>%i</literal></entry>
<entry>Instance name</entry>
- <entry>For instantiated units: this is the string between the <literal>@</literal> character and the suffix.</entry>
+ <entry>For instantiated units: this is the string between the <literal>@</literal> character and the suffix of the unit name.</entry>
</row>
<row>
<entry><literal>%I</literal></entry>
<entry>Unescaped instance name</entry>
- <entry></entry>
+ <entry>Same as <literal>%i</literal>, but with escaping undone</entry>
</row>
<row>
<entry><literal>%f</literal></entry>
<entry>Unescaped filename</entry>
- <entry>This is either the unescaped instance name (if applicable) with <filename>/</filename> prepended (if applicable), or the prefix name similarly prepended with <filename>/</filename>.</entry>
+ <entry>This is either the unescaped instance name (if applicable) with <filename>/</filename> prepended (if applicable), or the prefix name prepended with <filename>/</filename>.</entry>
</row>
<row>
<entry><literal>%c</literal></entry>
<entry>Control group path of the unit</entry>
- <entry></entry>
+ <entry>This path does not include the <filename>/sys/fs/cgroup/systemd/</filename> prefix.</entry>
</row>
<row>
<entry><literal>%r</literal></entry>
- <entry>Root control group path where units are placed.</entry>
- <entry>For system instances this usually resolves to <filename>/system</filename>, except in containers, where the path might be prefixed with the container's root control group.</entry>
+ <entry>Control group path of the slice the unit is placed in</entry>
+ <entry>This usually maps to the parent cgroup path of <literal>%c</literal>.</entry>
</row>
<row>
<entry><literal>%R</literal></entry>
- <entry>Parent directory of the control group path where units are placed.</entry>
- <entry>For system instances this usually
- resolves to <filename>/</filename>, except in
- containers, where this resolves to the
- container's root directory.</entry>
+ <entry>Root control group path below which slices and units are placed</entry>
+ <entry>For system instances, this resolves to <filename>/</filename>, except in containers, where this maps to the container's root control group path.</entry>
</row>
<row>
<entry><literal>%t</literal></entry>
- <entry>Runtime socket dir</entry>
- <entry>This is either <filename>/run</filename> (for the system manager) or <literal>$XDG_RUNTIME_DIR</literal> (for user managers).</entry>
+ <entry>Runtime directory</entry>
+ <entry>This is either <filename>/run</filename> (for the system manager) or the path <literal>$XDG_RUNTIME_DIR</literal> resolves to (for user managers).</entry>
</row>
<row>
<entry><literal>%u</literal></entry>
<row>
<entry><literal>%U</literal></entry>
<entry>User UID</entry>
- <entry>This is the UID of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry>
+ <entry>This is the numeric UID of the configured user of the unit, or (if none is set) the user running the systemd user instance. Note that this specifier is not available for units run by the systemd system instance (as opposed to those run by a systemd user instance), unless the user has been configured as a numeric UID in the first place or the configured user is the root user.</entry>
</row>
<row>
<entry><literal>%h</literal></entry>
<entry>User home directory</entry>
- <entry>This is the home directory of the configured user of the unit, or (if none is set) the user running the systemd instance.</entry>
+ <entry>This is the home directory of the configured user of the unit, or (if none is set) the user running the systemd user instance. Similar to <literal>%U</literal>, this specifier is not available for units run by the systemd system instance, unless the configured user is the root user.</entry>
</row>
<row>
<entry><literal>%s</literal></entry>
<entry>User shell</entry>
- <entry>This is the shell of the configured user of the unit, or (if none is set) the user running the systemd instance. If the user is <literal>root</literal> (UID equal to 0), the shell configured in account database is ignored and <filename>/bin/sh</filename> is always used.</entry>
+ <entry>This is the shell of the configured user of the unit, or (if none is set) the user running the systemd user instance. Similar to <literal>%U</literal>, this specifier is not available for units run by the systemd system instance, unless the configured user is the root user.</entry>
</row>
<row>
<entry><literal>%m</literal></entry>
<row>
<entry><literal>%H</literal></entry>
<entry>Host name</entry>
- <entry>The hostname of the running system.</entry>
+ <entry>The hostname of the running system at the point in time the unit configuation is loaded.</entry>
</row>
<row>
<entry><literal>%v</literal></entry>
<entry>Kernel release</entry>
- <entry>Identical to <command>uname -r</command> output.</entry>
+ <entry>Identical to <command>uname -r</command> output</entry>
</row>
<row>
<entry><literal>%%</literal></entry>
- <entry>Escaped %</entry>
- <entry>Single percent sign.</entry>
+ <entry>Single percent sign</entry>
+ <entry>Use <literal>%%</literal> in place of <literal>%</literal> to specify a single percent sign.</entry>
</row>
</tbody>
</tgroup>
<title>See Also</title>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.special</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.scope</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.slice</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.time</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-verify</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
+ <citerefentry project='man-pages'><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
<citerefentry><refentrytitle>uname</refentrytitle><manvolnum>1</manvolnum></citerefentry>
</para>