Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<filename>.service</filename> suffix removed) and
dynamically creates a service unit from that
script. This is useful for compatibility with
- SysV.</para>
+ SysV. Note that this compatibility is quite
+ comprehensive but not 100%. For details about the
+ incomptibilities see the <ulink
+ url="http://www.freedesktop.org/wiki/Software/systemd/Incompatibilities">Incompatibilities
+ with SysV</ulink> document.
+ </para>
</refsect1>
<refsect1>
<option>forking</option>,
<option>oneshot</option>,
<option>dbus</option>,
- <option>notify</option>.</para>
+ <option>notify</option> or
+ <option>idle</option>.</para>
<para>If set to
<option>simple</option> (the default
- value) it is expected that the process
- configured with
+ value if <varname>BusName=</varname>
+ is not specified) it is expected that
+ the process configured with
<varname>ExecStart=</varname> is the
main process of the service. In this
mode, if the process offers
option configured implicitly gain
dependencies on the
<filename>dbus.socket</filename>
- unit.</para>
+ unit. This type is the default if
+ <varname>BusName=</varname> is
+ specified.</para>
<para>Behaviour of
<option>notify</option> is similar to
below) should be set to open access to
the notification socket provided by
systemd. If
- <varname>NotifyAccess=</varname> is not
- set, it will implicitly be set to
+ <varname>NotifyAccess=</varname> is
+ not set, it will be implicitly set to
<option>main</option>.</para>
+
+ <para>Behaviour of
+ <option>idle</option> is very similar
+ to <option>simple</option>, however
+ actual execution of a the service
+ binary is delayed until all jobs are
+ dispatched. This may be used to avoid
+ interleaving of output of shell
+ services with the status output on the
+ console.</para>
</listitem>
</varlistentry>
main process of the daemon. The
command line accepts % specifiers as
described in
- <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. On
- top of that basic environment variable
- substitution is supported, where
- <literal>${FOO}</literal> is replaced
- by the string value of the environment
- variable of the same name. Also
- <literal>$FOO</literal> may appear as
- separate word on the command line in
- which case the variable is replaced by
- its value split at whitespaces. Note
- that the first argument (i.e. the
- binary to execute) may not be a
- variable, and must be a literal and
- absolute path name.</para></listitem>
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>.</para>
+
+ <para>On top of that basic environment
+ variable substitution is
+ supported. Use
+ <literal>${FOO}</literal> as part of a
+ word, or as word of its own on the
+ command line, in which case it will be
+ replaced by the value of the
+ environment variable including all
+ whitespace it contains, resulting in a
+ single argument. Use
+ <literal>$FOO</literal> as a separate
+ word on the command line, in which
+ case it will be replaced by the value
+ of the environment variable split up
+ at whitespace, resulting in no or more
+ arguments. Note that the first
+ argument (i.e. the program to execute)
+ may not be a variable, and must be a
+ literal and absolute path
+ name.</para></listitem>
</varlistentry>
<varlistentry>
time span value such as "5min
20s". Pass 0 to disable the timeout
logic. Defaults to
- 60s.</para></listitem>
+ 90s, except when <varname>Type=oneshot</varname> is
+ used in which case the timeout
+ is disabled by default.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>WatchdogSec=</varname></term>
+ <listitem><para>Configures the
+ watchdog timeout for a service. This
+ is activated when the start-up is
+ completed. The service must call
+ <citerefentry><refentrytitle>sd_notify</refentrytitle><manvolnum>3</manvolnum></citerefentry>
+ regularly with "WATCHDOG=1" (i.e. the
+ "keep-alive ping"). If the time
+ between two such calls is larger than
+ the configured time then the service
+ is placed in a failure state. By
+ setting <varname>Restart=</varname> to
+ <option>on-failure</option> or
+ <option>always</option> the service
+ will be automatically restarted. The
+ time configured here will be passed to
+ the executed service process in the
+ <varname>WATCHDOG_USEC=</varname>
+ environment variable. This allows
+ daemons to automatically enable the
+ keep-alive pinging logic if watchdog
+ support is enabled for the service. If
+ this option is used
+ <varname>NotifyAccess=</varname> (see
+ below) should be set to open access to
+ the notification socket provided by
+ systemd. If
+ <varname>NotifyAccess=</varname> is
+ not set, it will be implicitly set to
+ <option>main</option>. Defaults to 0,
+ which disables this
+ feature.</para></listitem>
</varlistentry>
<varlistentry>
0. If set to
<option>on-failure</option> it will be
restarted only when it exited with an
- exit code not equalling 0, or when
- terminated by a signal. If set to
+ exit code not equalling 0, when
+ terminated by a signal (including on
+ core dump), when an operation (such as
+ service reload) times out or when the
+ configured watchdog timeout is
+ triggered. If set to
<option>on-abort</option> it will be
restarted only if it exits due to
- reception of an uncaught signal. If
- set to <option>always</option> the
- service will be restarted regardless
- whether it exited cleanly or not, or
- got terminated abnormally by a
- signal.</para></listitem>
+ reception of an uncaught signal
+ (including on core dump). If set to
+ <option>always</option> the service
+ will be restarted regardless whether
+ it exited cleanly or not, got
+ terminated abnormally by a signal or
+ hit a timeout.</para></listitem>
</varlistentry>
<varlistentry>
false.</para></listitem>
</varlistentry>
- <varlistentry>
- <term><varname>SysVStartPriority=</varname></term>
- <listitem><para>Set the SysV start
- priority to use to order this service
- in relation to SysV services lacking
- LSB headers. This option is only
- necessary to fix ordering in relation
- to legacy SysV services, that have no
- ordering information encoded in the
- script headers. As such it should only
- be used as temporary compatibility
- option, and not be used in new unit
- files. Almost always it is a better
- choice to add explicit ordering
- directives via
- <varname>After=</varname> or
- <varname>Before=</varname>,
- instead. For more details see
- <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. If
- used, pass an integer value in the
- range 0-99.</para></listitem>
- </varlistentry>
-
<varlistentry>
<term><varname>KillMode=</varname></term>
<listitem><para>Specifies how
accepted. If <option>all</option> all
services updates from all members of
the service's control group are
- accepted. This option must be set to
+ accepted. This option should be set to
open access to the notification socket
when using
- <varname>Type=notify</varname> (see above).</para></listitem>
+ <varname>Type=notify</varname> or
+ <varname>WatchdogUsec=</varname> (see
+ above). If those options are used but
+ <varname>NotifyAccess=</varname> not
+ configured it will be implicitly set
+ to
+ <option>main</option>.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>Specifies the name of
the socket units this service shall
inherit the sockets from when the
- service (ignoring the different suffix
- of course) is started. Normally it
+ service is started. Normally it
should not be necessary to use this
setting as all sockets whose unit
shares the same name as the service
+ (ignoring the different suffix of course)
are passed to the spawned
process.</para>
refers to.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>StartLimitInterval=</varname></term>
+ <term><varname>StartLimitBurst=</varname></term>
+
+ <listitem><para>Configure service
+ start rate limiting. By default
+ services which are started more often
+ than 5 times within 10s are not
+ permitted to start any more times
+ until the 10s interval ends. With
+ these two options this rate limiting
+ may be modified. Use
+ <varname>StartLimitInterval=</varname>
+ to configure the checking interval
+ (defaults to 10s, set to 0 to disable
+ any kind of rate limiting). Use
+ <varname>StartLimitBurst=</varname> to
+ configure how many starts per interval
+ are allowed (defaults to 5). These
+ configuration options are particularly
+ useful in conjunction with
+ <varname>Restart=</varname>, however
+ apply to all kinds of starts
+ (including manual), not just those
+ triggered by the
+ <varname>Restart=</varname> logic.
+ Note that units which are configured
+ for <varname>Restart=</varname> and
+ which reach the start limit are not
+ attempted to be restarted anymore,
+ however they may still be restarted
+ manually at a later point from which
+ point on the restart logic is again
+ activated. Note that
+ <command>systemctl
+ reset-failed</command> will cause the
+ restart rate counter for a service to
+ be flushed, which is useful if the
+ administrator wants to manually start
+ a service and the start limit
+ interferes with
+ that.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>StartLimitAction=</varname></term>
+
+ <listitem><para>Configure the action
+ to take if the rate limit configured
+ with
+ <varname>StartLimitInterval=</varname>
+ and
+ <varname>StartLimitBurst=</varname> is
+ hit. Takes one of
+ <option>none</option>,
+ <option>reboot</option>,
+ <option>reboot-force</option> or
+ <option>reboot-immediate</option>. If
+ <option>none</option> is set,
+ hitting the rate limit will trigger no
+ action besides that the start will not
+ be
+ permitted. <option>reboot</option>
+ causes a reboot following the normal
+ shutdown procedure (i.e. equivalent to
+ <command>systemctl reboot</command>),
+ <option>reboot-force</option> causes
+ an forced reboot which will terminate
+ all processes forcibly but should
+ cause no dirty file systems on reboot
+ (i.e. equivalent to <command>systemctl
+ reboot -f</command>) and
+ <option>reboot-immediate</option>
+ causes immediate execution of the
+ <citerefentry><refentrytitle>reboot</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ system call, which might result in
+ data loss. Defaults to
+ <option>none</option>.</para></listitem>
+ </varlistentry>
+
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Compatibility Options</title>
+
+ <para>The following options are also available in the
+ <literal>[Service]</literal> section, but exist purely
+ for compatibility reasons and should not be used in
+ newly written service files.</para>
+
+ <variablelist>
+ <varlistentry>
+ <term><varname>SysVStartPriority=</varname></term>
+ <listitem><para>Set the SysV start
+ priority to use to order this service
+ in relation to SysV services lacking
+ LSB headers. This option is only
+ necessary to fix ordering in relation
+ to legacy SysV services, that have no
+ ordering information encoded in the
+ script headers. As such it should only
+ be used as temporary compatibility
+ option, and not be used in new unit
+ files. Almost always it is a better
+ choice to add explicit ordering
+ directives via
+ <varname>After=</varname> or
+ <varname>Before=</varname>,
+ instead. For more details see
+ <citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>. If
+ used, pass an integer value in the
+ range 0-99.</para></listitem>
+ </varlistentry>
+
<varlistentry>
<term><varname>FsckPassNo=</varname></term>
<listitem><para>Set the fsck passno