Copyright 2010 Lennart Poettering
systemd is free software; you can redistribute it and/or modify it
- under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ under the terms of the GNU Lesser General Public License as published by
+ the Free Software Foundation; either version 2.1 of the License, or
(at your option) any later version.
systemd is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- General Public License for more details.
+ Lesser General Public License for more details.
- You should have received a copy of the GNU General Public License
+ You should have received a copy of the GNU Lesser General Public License
along with systemd; If not, see <http://www.gnu.org/licenses/>.
-->
<refnamediv>
<refname>systemd.exec</refname>
- <refpurpose>systemd execution environment configuration</refpurpose>
+ <refpurpose>Execution environment configuration</refpurpose>
</refnamediv>
<refsynopsisdiv>
- <para><filename>systemd.service</filename>,
- <filename>systemd.socket</filename>,
- <filename>systemd.mount</filename>,
- <filename>systemd.swap</filename></para>
+ <para><filename><replaceable>service</replaceable>.service</filename>,
+ <filename><replaceable>socket</replaceable>.socket</filename>,
+ <filename><replaceable>mount</replaceable>.mount</filename>,
+ <filename><replaceable>swap</replaceable>.swap</filename></para>
</refsynopsisdiv>
<refsect1>
files, and
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
and
<citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
for more information on the specific unit
configuration files. The execution specific
configuration options are configured in the [Service],
- [Socket], [Mount] resp. [Swap] section, depending on the unit
+ [Socket], [Mount], or [Swap] sections, depending on the unit
type.</para>
</refsect1>
<refsect1>
<title>Options</title>
- <variablelist>
+ <variablelist class='unit-directives'>
<varlistentry>
<term><varname>WorkingDirectory=</varname></term>
<listitem><para>Takes an absolute
directory path. Sets the working
- directory for executed
- processes.</para></listitem>
+ directory for executed processes. If
+ not set defaults to the root directory
+ when systemd is running as a system
+ instance and the respective user's
+ home directory if run as
+ user.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>Group=</varname></term>
<listitem><para>Sets the Unix user
- resp. group the processes are executed
- as. Takes a single user resp. group
+ or group that the processes are executed
+ as, respectively. Takes a single user or group
name or ID as argument. If no group is
- set the default group of the user is
+ set, the default group of the user is
chosen.</para></listitem>
</varlistentry>
<listitem><para>Sets the supplementary
Unix groups the processes are executed
- as. This takes a space separated list
+ as. This takes a space-separated list
of group names or IDs. This option may
be specified more than once in which
case all listed groups are set as
- supplementary groups. This option does
- not override but extends the list of
- supplementary groups configured in the
- system group database for the
+ supplementary groups. When the empty
+ string is assigned the list of
+ supplementary groups is reset, and all
+ assignments prior to this one will
+ have no effect. In any way, this
+ option does not override, but extends
+ the list of supplementary groups
+ configured in the system group
+ database for the
user.</para></listitem>
</varlistentry>
for this process) and 1000 (to make
killing of this process under memory
pressure very likely). See <ulink
- url="http://www.kernel.org/doc/Documentation/filesystems/proc.txt">proc.txt</ulink>
+ url="https://www.kernel.org/doc/Documentation/filesystems/proc.txt">proc.txt</ulink>
for details.</para></listitem>
</varlistentry>
<listitem><para>Sets the CPU
scheduling priority for executed
- processes. Takes an integer between 1
- (lowest priority) and 99 (highest
- priority). The available priority
+ processes. The available priority
range depends on the selected CPU
- scheduling policy (see above). See
- <citerefentry><refentrytitle>sched_setscheduler</refentrytitle><manvolnum>2</manvolnum></citerefentry>
- for details.</para></listitem>
+ scheduling policy (see above). For
+ real-time scheduling policies an
+ integer between 1 (lowest priority)
+ and 99 (highest priority) can be used.
+ See <citerefentry><refentrytitle>sched_setscheduler</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ for details.
+ </para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>Controls the CPU
affinity of the executed
processes. Takes a space-separated
- list of CPU indexes. See
+ list of CPU indexes. This option may
+ be specified more than once in which
+ case the specificed CPU affinity masks
+ are merged. If the empty string is
+ assigned the mask is reset, all
+ assignments prior to this will have no
+ effect. See
<citerefentry><refentrytitle>sched_setaffinity</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for details.</para></listitem>
</varlistentry>
in which case all listed variables
will be set. If the same variable is
set twice the later setting will
- override the earlier setting. See
+ override the earlier setting. If the
+ empty string is assigned to this
+ option the list of environment
+ variables is reset, all prior
+ assignments have no effect.
+ Variable expansion is not performed
+ inside the strings, however, specifier
+ expansion is possible. $ character has
+ no special meaning.
+ If you need to assign a value containing spaces
+ to a variable, use double quotes (")
+ for the assignment.</para>
+
+ <para>Example:
+ <programlisting>Environment="VAR1=word1 word2" VAR2=word3 "VAR3=word 5 6"</programlisting>
+ gives three variables <literal>VAR1</literal>,
+ <literal>VAR2</literal>, <literal>VAR3</literal>.
+ </para>
+
+ <para>
+ See
<citerefentry><refentrytitle>environ</refentrytitle><manvolnum>7</manvolnum></citerefentry>
- for details.</para></listitem>
+ for details about environment variables.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>EnvironmentFile=</varname></term>
<varname>Environment=</varname> but
reads the environment variables from a
text file. The text file should
- contain new-line separated variable
+ contain new-line-separated variable
assignments. Empty lines and lines
starting with ; or # will be ignored,
- which may be used for commenting. The
- parser strips leading and
- trailing whitespace from the values
+ which may be used for commenting. A line
+ ending with a backslash will be concatenated
+ with the following one, allowing multiline variable
+ definitions. The parser strips leading
+ and trailing whitespace from the values
of assignments, unless you use
- double quotes (").
- The
- argument passed should be an absolute
- file name, optionally prefixed with
- "-", which indicates that if the file
- does not exist it won't be read and no
- error or warning message is
- logged. The files listed with this
+ double quotes (").</para>
+
+ <para>The argument passed should be an
+ absolute filename or wildcard
+ expression, optionally prefixed with
+ <literal>-</literal>, which indicates
+ that if the file does not exist it
+ won't be read and no error or warning
+ message is logged. This option may be
+ specified more than once in which case
+ all specified files are read. If the
+ empty string is assigned to this
+ option the list of file to read is
+ reset, all prior assignments have no
+ effect.</para>
+
+ <para>The files listed with this
directive will be read shortly before
the process is executed. Settings from
these files override settings made
these files the files will be read in
the order they are specified and the
later setting will override the
- earlier setting. </para></listitem>
+ earlier setting.</para></listitem>
</varlistentry>
<varlistentry>
<citerefentry><refentrytitle>dmesg</refentrytitle><manvolnum>1</manvolnum></citerefentry>. <option>journal</option>
connects it with the journal which is
accessible via
- <citerefentry><refentrytitle>systemd-journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
(Note that everything that is written
to syslog or kmsg is implicitly stored
in the journal as well, those options
with
<option>DefaultStandardOutput=</option>
in
- <citerefentry><refentrytitle>systemd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which defaults to
<option>journal</option>.</para></listitem>
</varlistentry>
setting defaults to the value set with
<option>DefaultStandardError=</option>
in
- <citerefentry><refentrytitle>systemd.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
which defaults to
<option>inherit</option>.</para></listitem>
</varlistentry>
</varlistentry>
<varlistentry>
<term><varname>TTYVTDisallocate=</varname></term>
- <listitem><para>If the the terminal
+ <listitem><para>If the terminal
device specified with
<varname>TTYPath=</varname> is a
virtual console terminal try to
prefixes may be disabled with
<varname>SyslogLevelPrefix=</varname>,
see below. For details see
- <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
+ <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
Defaults to
<option>info</option>.</para></listitem>
argument. If true and
<varname>StandardOutput=</varname> or
<varname>StandardError=</varname> are
- set to <option>syslog</option> or
- <option>kmsg</option> log lines
+ set to <option>syslog</option>,
+ <option>kmsg</option> or
+ <option>journal</option>, log lines
written by the executed process that
are prefixed with a log level will be
passed on to syslog with this log
these prefixes is disabled and the
logged lines are passed on as-is. For
details about this prefixing see
- <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>7</manvolnum></citerefentry>.
+ <citerefentry><refentrytitle>sd-daemon</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
Defaults to true.</para></listitem>
</varlistentry>
<term><varname>TimerSlackNSec=</varname></term>
<listitem><para>Sets the timer slack
in nanoseconds for the executed
- processes. The timer slack controls the
- accuracy of wake-ups triggered by
+ processes. The timer slack controls
+ the accuracy of wake-ups triggered by
timers. See
<citerefentry><refentrytitle>prctl</refentrytitle><manvolnum>2</manvolnum></citerefentry>
for more information. Note that in
contrast to most other time span
definitions this parameter takes an
- integer value in nano-seconds and does
- not understand any other
- units.</para></listitem>
+ integer value in nano-seconds if no
+ unit is specified. The usual time
+ units are understood
+ too.</para></listitem>
</varlistentry>
<varlistentry>
conjunction with socket-activated
services, and stream sockets (TCP) in
particular. It has no effect on other
- socket types (e.g. datagram/UDP) and on processes
- unrelated to socket-based
+ socket types (e.g. datagram/UDP) and
+ on processes unrelated to socket-based
activation. If the tcpwrap
verification fails daemon start-up
will fail and the connection is
terminated. See
<citerefentry><refentrytitle>tcpd</refentrytitle><manvolnum>8</manvolnum></citerefentry>
- for details.</para></listitem>
+ for details. Note that this option may
+ be used to do access control checks
+ only. Shell commands and commands
+ described in
+ <citerefentry><refentrytitle>hosts_options</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ are not supported.</para></listitem>
</varlistentry>
<varlistentry>
capability bounding set for the
executed process. See
<citerefentry><refentrytitle>capabilities</refentrytitle><manvolnum>7</manvolnum></citerefentry>
- for details. Takes a whitespace
- separated list of capability names as
- read by
- <citerefentry><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>.
+ for details. Takes a whitespace-separated
+ list of capability names as read by
+ <citerefentry><refentrytitle>cap_from_name</refentrytitle><manvolnum>3</manvolnum></citerefentry>,
+ e.g. <constant>CAP_SYS_ADMIN</constant>,
+ <constant>CAP_DAC_OVERRIDE</constant>,
+ <constant>CAP_SYS_PTRACE</constant>.
Capabilities listed will be included
in the bounding set, all others are
removed. If the list of capabilities
- is prefixed with ~ all but the listed
- capabilities will be included, the
- effect of the assignment
- inverted. Note that this option does
- not actually set or unset any
+ is prefixed with <literal>~</literal>
+ all but the listed capabilities will
+ be included, the effect of the
+ assignment inverted. Note that this
+ option also affects the respective
capabilities in the effective,
- permitted or inherited capability
- sets. That's what
- <varname>Capabilities=</varname> is
- for. If this option is not used the
+ permitted and inheritable capability
+ sets, on top of what
+ <varname>Capabilities=</varname>
+ does. If this option is not used the
capability bounding set is not
modified on process execution, hence
no limits on the capabilities of the
- process are enforced.</para></listitem>
+ process are enforced. This option may
+ appear more than once in which case
+ the bounding sets are merged. If the
+ empty string is assigned to this
+ option the bounding set is reset to
+ the empty capability set, and all
+ prior settings have no effect. If set
+ to <literal>~</literal> (without any
+ further argument) the bounding set is
+ reset to the full set of available
+ capabilities, also undoing any
+ previous settings.</para></listitem>
</varlistentry>
<varlistentry>
<option>no-setuid-fixup</option>,
<option>no-setuid-fixup-locked</option>,
<option>noroot</option> and/or
- <option>noroot-locked</option>.
- </para></listitem>
+ <option>noroot-locked</option>. This
+ option may appear more than once in
+ which case the secure bits are
+ ORed. If the empty string is assigned
+ to this option the bits are reset to
+ 0.</para></listitem>
</varlistentry>
<varlistentry>
groups the executed processes shall be
made members of. Takes a
space-separated list of cgroup
- identifiers. A cgroup identifier has a
- format like
- <filename>cpu:/foo/bar</filename>,
- where "cpu" identifies the kernel
+ identifiers. A cgroup identifier is
+ formatted like
+ <filename noindex='true'>cpu:/foo/bar</filename>,
+ where "cpu" indicates the kernel
control group controller used, and
- <filename>/foo/bar</filename> is the
+ <filename noindex='true'>/foo/bar</filename> is the
control group path. The controller
name and ":" may be omitted in which
case the named systemd control group
hierarchy is implied. Alternatively,
the path and ":" may be omitted, in
which case the default control group
- path for this unit is implied. This
- option may be used to place executed
- processes in arbitrary groups in
- arbitrary hierarchies -- which can be
- configured externally with additional
- execution limits. By default systemd
- will place all executed processes in
- separate per-unit control groups
- (named after the unit) in the systemd
- named hierarchy. Since every process
- can be in one group per hierarchy only
- overriding the control group path in
- the named systemd hierarchy will
- disable automatic placement in the
- default group. This option is
- primarily intended to place executed
- processes in specific paths in
- specific kernel controller
- hierarchies. It is however not
+ path for this unit is implied.</para>
+
+ <para>This option may be used to place
+ executed processes in arbitrary groups
+ in arbitrary hierarchies -- which may
+ then be externally configured with
+ additional execution limits. By
+ default systemd will place all
+ executed processes in separate
+ per-unit control groups (named after
+ the unit) in the systemd named
+ hierarchy. This option is primarily
+ intended to place executed processes
+ in specific paths in specific kernel
+ controller hierarchies. It is not
recommended to manipulate the service
- control group path in the systemd
- named hierarchy. For details about
+ control group path in the private
+ systemd named hierarchy
+ (i.e. <literal>name=systemd</literal>),
+ and doing this might result in
+ undefined behaviour. For details about
control groups see <ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>.</para></listitem>
+ url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>.</para>
+
+ <para>This option may appear more than
+ once, in which case the list of
+ control group assignments is
+ merged. If the same hierarchy gets two
+ different paths assigned only the
+ later setting will take effect. If the
+ empty string is assigned to this
+ option the list of control group
+ assignments is reset, all previous
+ assignments will have no
+ effect.</para>
+
+ <para>Note that the list of control
+ group assignments of a unit is
+ extended implicitly based on the
+ settings of
+ <varname>DefaultControllers=</varname>
+ of
+ <citerefentry><refentrytitle>systemd-system.conf</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ but a unit's
+ <varname>ControlGroup=</varname>
+ setting for a specific controller
+ takes precedence.</para></listitem>
</varlistentry>
<varlistentry>
</varlistentry>
<varlistentry>
- <term><varname>ControlGroupPersistant=</varname></term>
+ <term><varname>ControlGroupPersistent=</varname></term>
<listitem><para>Takes a boolean
argument. If true, the control groups
created for this unit will be marked
- to be persistant, i.e. systemd will
+ to be persistent, i.e. systemd will
not remove them when stopping the
unit. The default is false, meaning
that the control groups will be
<listitem><para>Set a specific control
group attribute for executed
- processes, and (if needed) add the the
+ processes, and (if needed) add the
executed processes to a cgroup in the
hierarchy of the controller the
attribute belongs to. Takes two
the controller and the default unit
cgroup path is implied. Thus, using
<varname>ControlGroupAttribute=</varname>
- is in most case sufficient to make use
- of control group enforcements,
+ is in most cases sufficient to make
+ use of control group enforcements,
explicit
<varname>ControlGroup=</varname> are
only necessary in case the implied
service is not desirable. For details
about control group attributes see
<ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>. This
+ url="https://www.kernel.org/doc/Documentation/cgroups/cgroups.txt">cgroups.txt</ulink>. This
option may appear more than once, in
order to set multiple control group
- attributes.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>CPUShares=</varname></term>
-
- <listitem><para>Assign the specified
- overall CPU time shares to the
- processes executed. Takes an integer
- value. This controls the
- <literal>cpu.shares</literal> control
- group attribute, which defaults to
- 1024. For details about this control
- group attribute see <ulink
- url="http://www.kernel.org/doc/Documentation/scheduler/sched-design-CFS.txt">sched-design-CFS.txt</ulink>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>MemoryLimit=</varname></term>
- <term><varname>MemorySoftLimit=</varname></term>
-
- <listitem><para>Limit the overall memory usage
- of the executed processes to a certain
- size. Takes a memory size in bytes. If
- the value is suffixed with K, M, G or
- T the specified memory size is parsed
- as Kilobytes, Megabytes, Gigabytes,
- resp. Terabytes (to the base
- 1024). This controls the
- <literal>memory.limit_in_bytes</literal>
- and
- <literal>memory.soft_limit_in_bytes</literal>
- control group attributes. For details
- about these control group attributes
- see <ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/memory.txt">memory.txt</ulink>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>DeviceAllow=</varname></term>
- <term><varname>DeviceDeny=</varname></term>
-
- <listitem><para>Control access to
- specific device nodes by the executed processes. Takes two
- space separated strings: a device node
- path (such as
- <filename>/dev/null</filename>)
- followed by a combination of r, w, m
- to control reading, writing resp.
- creating of the specific device node
- by the unit. This controls the
- <literal>devices.allow</literal>
- and
- <literal>devices.deny</literal>
- control group attributes. For details
- about these control group attributes
- see <ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/devices.txt">devices.txt</ulink>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>BlockIOWeight=</varname></term>
-
- <listitem><para>Set the default or
- per-device overall block IO weight
- value for the executed
- processes. Takes either a single
- weight value (between 10 and 1000) to
- set the default block IO weight, or a
- space separated pair of a file path
- and a weight value to specify the
- device specific weight value (Example:
- "/dev/sda 500"). The file path may be
- specified as path to a block device
- node or as any other file in which
- case the backing block device of the
- file system of the file is
- determined. This controls the
- <literal>blkio.weight</literal> and
- <literal>blkio.weight_device</literal>
- control group attributes, which
- default to 1000. Use this option
- multiple times to set weights for
- multiple devices. For details about
- these control group attributes see
- <ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.</para></listitem>
- </varlistentry>
-
- <varlistentry>
- <term><varname>BlockIOReadBandwidth=</varname></term>
- <term><varname>BlockIOWriteBandwidth=</varname></term>
-
- <listitem><para>Set the per-device
- overall block IO bandwith limit for
- the executed processes. Takes a space
- separated pair of a file path and a
- bandwith value (in bytes per second)
- to specify the device specific
- bandwidth. The file path may be
- specified as path to a block device
- node or as any other file in which
- case the backing block device of the
- file system of the file is determined.
- If the bandwith is suffixed with K, M,
- G, or T the specified bandwith is
- parsed as Kilobytes, Megabytes,
- Gigabytes, resp. Terabytes (Example:
- "/dev/disk/by-path/pci-0000:00:1f.2-scsi-0:0:0:0
- 5M"). This controls the
- <literal>blkio.read_bps_device</literal>
- and
- <literal>blkio.write_bps_device</literal>
- control group attributes. Use this
- option multiple times to set bandwith
- limits for multiple devices. For
- details about these control group
- attributes see <ulink
- url="http://www.kernel.org/doc/Documentation/cgroups/blkio-controller.txt">blkio-controller.txt</ulink>.</para></listitem>
+ attributes. If this option is used
+ multiple times for the same cgroup
+ attribute only the later setting takes
+ effect. If the empty string is
+ assigned to this option the list of
+ attributes is reset, all previous
+ cgroup attribute settings have no
+ effect, including those done with
+ <varname>CPUShares=</varname>,
+ <varname>MemoryLimit=</varname>,
+ <varname>MemorySoftLimit</varname>,
+ <varname>DeviceAllow=</varname>,
+ <varname>DeviceDeny=</varname>,
+ <varname>BlockIOWeight=</varname>,
+ <varname>BlockIOReadBandwidth=</varname>,
+ <varname>BlockIOWriteBandwidth=</varname>.
+ </para></listitem>
</varlistentry>
<varlistentry>
<term><varname>InaccessibleDirectories=</varname></term>
<listitem><para>Sets up a new
- file-system name space for executed
+ file system namespace for executed
processes. These options may be used
to limit access a process might have
- to the main file-system
+ to the main file system
hierarchy. Each setting takes a
space-separated list of absolute
directory paths. Directories listed in
usual file access controls would
permit this. Directories listed in
<varname>InaccessibleDirectories=</varname>
- will be made inaccessible for processes
- inside the namespace. Note that
- restricting access with these options
- does not extend to submounts of a
- directory. You must list submounts
- separately in these settings to
- ensure the same limited access. These
- options may be specified more than
- once in which case all directories
- listed will have limited access from
- within the
- namespace.</para></listitem>
+ will be made inaccessible for
+ processes inside the namespace. Note
+ that restricting access with these
+ options does not extend to submounts
+ of a directory. You must list
+ submounts separately in these settings
+ to ensure the same limited
+ access. These options may be specified
+ more than once in which case all
+ directories listed will have limited
+ access from within the namespace. If
+ the empty string is assigned to this
+ option the specific list is reset, and
+ all prior assignments have no
+ effect.</para></listitem>
</varlistentry>
<varlistentry>
<listitem><para>Takes a boolean
argument. If true sets up a new file
system namespace for the executed
- processes and mounts a private
- <filename>/tmp</filename> directory
- inside it, that is not shared by
+ processes and mounts private
+ <filename>/tmp</filename> and
+ <filename>/var/tmp</filename> directories
+ inside it, that are not shared by
processes outside of the
namespace. This is useful to secure
access to temporary files of the
process, but makes sharing between
processes via
- <filename>/tmp</filename>
- impossible. Defaults to
+ <filename>/tmp</filename> or
+ <filename>/var/tmp</filename>
+ impossible. All temporary data created
+ by service will be removed after service
+ is stopped. Defaults to
false.</para></listitem>
</varlistentry>
<option>shared</option>,
<option>slave</option> or
<option>private</option>, which
- control whether namespaces set up with
- <varname>ReadWriteDirectories=</varname>,
- <varname>ReadOnlyDirectories=</varname>
- and
- <varname>InaccessibleDirectories=</varname>
- receive or propagate new mounts
- from/to the main namespace. See
- <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>1</manvolnum></citerefentry>
- for details. Defaults to
- <option>shared</option>, i.e. the new
- namespace will both receive new mount
- points from the main namespace as well
- as propagate new mounts to
- it.</para></listitem>
+ control whether the file system
+ namespace set up for this unit's
+ processes will receive or propagate
+ new mounts. See
+ <citerefentry><refentrytitle>mount</refentrytitle><manvolnum>2</manvolnum></citerefentry>
+ for details. Default to
+ <option>shared</option>.</para></listitem>
</varlistentry>
<varlistentry>
<term><varname>UtmpIdentifier=</varname></term>
- <listitem><para>Takes a a four
+ <listitem><para>Takes a four
character identifier string for an
utmp/wtmp entry for this service. This
should only be set for services such
this service.</para></listitem>
</varlistentry>
+ <varlistentry>
+ <term><varname>IgnoreSIGPIPE=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If true, causes <constant>SIGPIPE</constant> to be
+ ignored in the executed
+ process. Defaults to true because
+ <constant>SIGPIPE</constant> generally is useful only in
+ shell pipelines.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>NoNewPrivileges=</varname></term>
+
+ <listitem><para>Takes a boolean
+ argument. If true, ensures that the
+ service process and all its children
+ can never gain new privileges. This
+ option is more powerful than the respective
+ secure bits flags (see above), as it
+ also prohibits UID changes of any
+ kind. This is the simplest, most
+ effective way to ensure that a process
+ and its children can never elevate
+ privileges again.</para></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><varname>SystemCallFilter=</varname></term>
+
+ <listitem><para>Takes a space-separated
+ list of system call
+ names. If this setting is used, all
+ system calls executed by the unit
+ process except for the listed ones
+ will result in immediate process
+ termination with the
+ <constant>SIGSYS</constant> signal
+ (whitelisting). If the first character
+ of the list is <literal>~</literal>
+ the effect is inverted: only the
+ listed system calls will result in
+ immediate process termination
+ (blacklisting). If this option is used
+ <varname>NoNewPrivileges=yes</varname>
+ is implied. This feature makes use of
+ the Secure Computing Mode 2 interfaces
+ of the kernel ('seccomp filtering')
+ and is useful for enforcing a minimal
+ sandboxing environment. Note that the
+ <function>execve</function>,
+ <function>rt_sigreturn</function>,
+ <function>sigreturn</function>,
+ <function>exit_group</function>,
+ <function>exit</function> system calls
+ are implicitly whitelisted and don't
+ need to be listed explicitly. This
+ option may be specified more than once
+ in which case the filter masks are
+ merged. If the empty string is
+ assigned the filter is reset, all
+ prior assignments will have no
+ effect.</para></listitem>
+ </varlistentry>
+
</variablelist>
</refsect1>
<para>
<citerefentry><refentrytitle>systemd</refentrytitle><manvolnum>1</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>journalctl</refentrytitle><manvolnum>8</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.unit</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.service</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.socket</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
<citerefentry><refentrytitle>systemd.swap</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
- <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>
+ <citerefentry><refentrytitle>systemd.mount</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.kill</refentrytitle><manvolnum>5</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>systemd.directives</refentrytitle><manvolnum>7</manvolnum></citerefentry>
</para>
</refsect1>